[NAMM ] Trace Elliot Trace Acoustic Amps

Designed in the U.K. and produced in the U.S.A., the Trace Acoustic TA Series consists of three models: the TA-300, TA-200 and TA-100. All models feature Trace Elliot’s Shape circuit and built-in auto-compressor on each channel, as well as customizable DSP effects with parameter and setting adjustment with separate reverbs that can be assigned to each channel.

These new amps include two modes of switchable features for presets and performance variable controls, all of which are also footswitchable using the supplied six-function foot controller with 25-foot cable.

In addition, the TA-100 and TA-200 include a ballistic nylon shoulder bag, so players can carry both their amp and guitar at the same time. The TA-300 includes an amp cover to protect it during transit.

Featured on All Models

• Built in auto-compressor on all channels
• Signal level LED on all channels
• Shape switch for instant EQ’d sound on all channels (footswitchable on Channel 1)
• Footswitchable Phase switch on all channels
• Effect Parameter and Setting rotary encoders
• Allows for separate levels of Reverb to be applied to each channel
• Tap tempo (from either front panel or footswitch)
• FLS Feedback Locating System on each band of EQ using LEDs to indicate where feedback is occurring
• Master Volume and Mute switch (footswitchable) that mutes all outputs except Tuner Out
• Tuner output, Left and Right Preamp Outputs and Power Amp Inputs (to use as effects loop)
• Two DI outputs; can be configured as dry Channel 1 and Channel 2 out, or processed Left and Right channels out
• Illumination switch for turning front panel lights on or off
• Power amp featuring Dynamic Correction
• Designed in the U.K. and made in the U.S.A.

TA-300

• Two preamp channels with 300 watts total power output
• 2 × 5” specially designed neodymium Celestion® speakers and 1 × 12” G12 Century Vintage neodymium Celestion speaker
• 1/4” jack input with piezo switch for ultra-high impedance input stage on Channel 1
• Combination balanced XLR and 1/4” jack input with phantom power switch on Channel 2
• Lo-Trim & Hi-Trim rotary controls on Channel 1
• Gain & Notch filter rotary controls on both Channels
• Channel 1 can also have either Chorus, Flanger, Phaser, Tremolo, or various delays including stereo Ping Pong
• Six-band graphic EQ
• Custom-fitted ballistic nylon protective cover included

TA-200

• Two preamp channels with 200 watts stereo total power output
• 4 × 5” specially designed neodymium Celestion® speakers connected in stereo
• 1/4” jack input with piezo switch for ultra-high impedance input stage on Channel 1
• Combination balanced XLR and 1/4” jack input with phantom power switch on Channel 2
• Lo-Trim & Hi-Trim rotary controls on Channel 1
• Gain & Notch filter rotary controls on both Channels
• Channel 1 can also have either Chorus, Flanger, Phaser, Tremolo, or various delays including stereo Ping Pong
• Six-band graphic EQ
• Custom-fitted ballistic nylon bag included

TA-100

• Two preamp channels with 100 watts stereo total power output
• 2 × 5” specially designed neodymium Celestion® speakers connected in stereo
• 1/4” jack input with piezo switch for ultra-high impedance input stage on Channel 1
  Combination balanced XLR and 1/4” jack input with Phantom power switch on Channel 2
• Lo-Trim & Hi-Trim rotary controls on Channel 1
• Gain & Notch filter rotary controls on both Channels
• Channel 1 can also have either Chorus, Flanger, Phaser, Tremolo, or various delays including stereo Ping Pong
• Six-band graphic EQ
• Custom-fitted ballistic nylon bag included
• Features, specifications and pricing are subject to change without notice.

To find out more, visit www.traceelliot.com.