All user reviews of 5/5 for the MOTU 896 Mk3

I was looking for a sound card with multiple inputs, reliable and a higher range.
I use it for recording vocals, acoustic and electric guitar, and my samplers
(And mixes!)
It is interfaced with a PC Motherboard Asus Quad core 8GB Ram windows 7 pro.
I takes only 8 because it does not have a MIDI interface.

UTILIZATION

The drivers are stable, there is nothing to say except some crashes when I turn on the compressor and / or external preamp. Just turn it off and restart (a 10aine seconds).
I use Cubase5.
Next record, I record one track. Mic, guitar, samplers and MIDI tracks.
Side reading, 20, 30, 40 tracks and more.
I have a latency of 12ms. I never really set this option. 12ms is the last proper limit and it suits me.
I put 8 because the drivers are not updated, the Hybrid is preferred.
But they are stable.

GETTING STARTED

Quick installation and trouble-free!
Setup is simple, you just understand the CueMix (software management inputs, outputs, EQ, Compression, and effects for each track), but it's fast.
No inconsistency, I had interfaced with a Tascam FW-1082 on its second Firewire port: no problem.

OVERALL OPINION

I love its appearance, beautiful and strong. The master volume knob is a bit small, and as I often used my fingernail has etched a little facade, so more paint near the volume button. I intend to take a case management monitoring to mute the output with a volume button.
The Main Output and Headphone volume management is not terrible, the headphone output is connected to the Main Out 1/2. So, if I want to use THAT headphone, I must turn my monitor speakers. (Or so I missed a config routing in CueMix? Send me a message if you have a solution )

Before I had a Tascam US-428 (beautiful blue) and a FW-1082. I wanted more inputs, better converters, m ^ me if those are the Tascam respectable, and a rack-mounted.

Side converters, nothing to say, no breath, transparent.
It lacks an interface MIDI.J 'I had to get an external USB, from M-Audio.

28 channel in/28 channel out firewire interface.
8 instrument/mic in and outs
16 ADAT/Toslink i/o
Spdif and AES/Ebu i/o
DSP powered effects.


UTILIZATION

On Mac I just love Motu. This is my 3rd Motu interface. On PC I'd rather use something like a Fire Face.

GETTING STARTED

Set-up is insanely simple, install drivers, connect, turn on...record.

OVERALL OPINION

There is nothing I don't dig about this interface. AND it sounds great.
Whether I use it for a mic pre or as my word clock.
It comes with a software mixer that lets you run separate mixes. Actually I have used it as a stand alone mixer without computer. The small interface is a bit fiddly for this but it does work as described by the manufacturer.

When you open the software mixer you have three panes. One for inputs, next is mixes, next outputs. You can run effects on the inputs or on the outputs. SO you have the choice to print them or not. It comes with soft clipping so you can hit the inputs without too much worry of digital distortion.
My favorite of this is that when you're using it with another interface that has a fixed sample rate and you connect them via AES/EBU you can run the Motu at your project sample rate and convert at the AES/EBU outs. Or vice versa. Ingenious!

Plus the fact that you can send different mixes to different sources, at this price makes it a great value for the money.

MOTU 896 HD has added the functionality I rvais, namely the effects of Intgr trs good quality (Rverbe, EQ, Compression, Limiter), so as to increase re substantial comfort in the musicians' recordings.

Surcrot of all rglages is available in "Stand Alone", which makes it a good rev mixer for live!

Used as a converter with a Neve 1073, TL Audio Valve Classic, etc..

UTILIZATION

Extremely simple installation in 3 minutes ...

GETTING STARTED

Drivers stable.
Used with Cubase & Samplitude.
Recording 16 tracks simultaneously by combining my other HD 896.

OVERALL OPINION

Reue 2 weeks ago.
What I like most:
Versatility of the card (pramplis transparent, good converters).
Trs Intgr effects of good quality (can also be used for mixing ...)

Trs qualitprix good value given the fact that this interface is actually a sound card, a converter honnte trs, table 8-track mixer with effects Intgr!

What motivated my choice is the price for the number of I / O, the number of preamps ...
Having The AES-EBU and SPDIF at the same time.
I use one hand on the move with a rosetta 200 AES, my DTC SPDIF and ADAT card Creamware A16, and a set of preamp to go to catch at the other end of the world with a MacBook Pros.
And fix in the studio with a Mac Pro and a Soundcraft 2400 right now.

UTILIZATION

Everything is stable, with Logic Pro 9, I recorded up to 28 tracks simultaneously without worry.
Latency is negligible a few milliseconds.

GETTING STARTED

No problem.

OVERALL OPINION

I use it since its purchase, I had a lot of other sound card.
I like the quality for the price, the preamp, I / S. ..
I do it again without hesitation that choice in this price range.

◦ What characteristics have motivated your choice?
8 mic / guitar pro quality, 16 channels ADAT, S / PDIF to AES / EBU, we can all connect to this interface.
◦ For what purpose?
Sound card and mixer with DSP for stage or mixing. Tested in conjunction Guitar / Vocals / Hearts / Bass / Drums Electronics, as a mixer with reverb, compressions, EQ ....
Tip for use as a VST effects BFD: BFD is a virtual instrument drum and can be configured with many separate outputs: Kick, Snare, Hat, TOM1 ..... To apply DSP effects on each slice of drums (For example, a compression on the kick, an EQ on the toms ...), simply connect inputs and outputs with 2 ADAT optical cable (12 € for two) to see 16 extra tracks in the software mixing. Next, in your preferred CAD, we must assign the outputs of BFD:
Kick ADAT = 1
Snare = ADAT 2
ETC .....
You find all the separate tracks and VST mixer in CueMix FX, a 24 track digital console. You can also link the inputs and outputs S / PDIF and AES / EBU to add another 4 tracks or 28 tracks with DSP (8 analog and 20 tracks for VST)
It is even possible to make tracks for the entire Drum group eg: in the FX mixer CueMix must use the bus (BUS MIX Drum Appoint and assign it to a digital output also called Mix Drums) in the table corresponding mixing, transfer all the tracks except the drums. In the mixer main mix (Master Out), mutating all the drum tracks kick, snare ... Runway Mix group except Drums. That's the trick "how to use DSP live on VST)
◦ What is your config (Motherboard / CPU / Ram / Disk ,...)? MacBook
◦ With what instruments or systems (console, preamp, DTD ...) you are using and how connections?
I'll buy a motu 8pre to add 8 preamps and to record an acoustic drum.

UTILIZATION

I use Cubase 5 and BFD with electronic drums live. I arrive at a total latency of 4MS without cracking and with no crashes

GETTING STARTED

My little sister has installed the drivers and softwares

OVERALL OPINION

Awesome! 3 months, used in home studio, live as a mixer is much smaller than an N12, quality preamps is to go.