Log in
Log in

or
Create an account

or
Add this product to
  • My former gear
  • My current gear
  • My wishlist
Marshall PB100 Power Brake
Images
1/118

Marshall PB100 Power Brake

Price engine
Classified Ads
Forums

PB100 Power Brake classified ad

Alerte nouvelle annonce

Images

Reviews

4.0/5
(4 reviews)
75 %
(3 reviews)
Write a user review
Value For Money : Excellent
Anonymous

Marshall PB100 Power BrakePublished on 07/21/04 at 11:35
(This content has been automatically translated from French)
Features (7/10)

Come on, a shot tlachat ... What is so ???

The only product Marshall useful!

This is a volume reducer in power amp output.
A between two outputs (8 and 16 ohms). A knob from 0 -33 dB. But it is mono.

Using (10/10)

Use of simpler and more videntes!
This small boiboite (4kg all the same) connects between the speaker output of an amp and HP (or cabinet) himself, and helps push the volume of the amp for donf a wonderful natural compression or a crunch of the power amp, without ruining the eardrum, since reduces the volume after the amp (is that clear?). It transforms electrical energy ... (?) ... HP heat output ... ... but we do not feel.

Sonorits (7/10)...…
Read more
Features (7/10)

Come on, a shot tlachat ... What is so ???

The only product Marshall useful!

This is a volume reducer in power amp output.
A between two outputs (8 and 16 ohms). A knob from 0 -33 dB. But it is mono.

Using (10/10)

Use of simpler and more videntes!
This small boiboite (4kg all the same) connects between the speaker output of an amp and HP (or cabinet) himself, and helps push the volume of the amp for donf a wonderful natural compression or a crunch of the power amp, without ruining the eardrum, since reduces the volume after the amp (is that clear?). It transforms electrical energy ... (?) ... HP heat output ... ... but we do not feel.

Sonorits (7/10)

Fabulous when you have a 100 watt amp 9m in his studio and neighbors ... old!
It was almost the sound of death that is paid in repeats without the volume! It could color the sound. Certainly. Like any powersoak my view, since dj HP do not work like they grate a full charge. But not go wrong!

I had found really compelling about the section of a JCM900 molassonne low volume, has had some woke up the bousin (and upstream, it rcuprait a Engl 530). In short, this is the only time when this amp Tone but I digress.

Overall Opinion (7/10)

Simply indispensable when you have a tube amp that is expressed only when the master is background.

The problem, thank you Marshall, is that it is mono. So if you have a stro amp, must buy 2 ... and not far from the track ... 400 (200 in secondhand approximately).

But frankly, pushing his amp (lamps, huh!) 8 and not have ears bleeding, was well worth the small concessions, right?

Small 7/13/03 addition: since the power tubes working full throttle, it lcheront faster than if you play low volume without the Power Brake. And we did not sound 100% rpt '/ live, as HP, themselves, they do not work a lot. But good, conomise the bowls. And we have something for nothing!

Added 21/07/04: I come out of the closet this notice demand some nice nostalgic Afiens
Incidentally, I am dbarrass me when I finally had a real and most excellent poweramp, Mesa 2:90. And now that I ironed a head (Engl Powerball), I feel I'll get back to power soak, as the Engl power section only takes intressante dynamics when pushed a But little I know, I rather lorgnerai ct of the Weber Mass now.
See less
»
AdrianmayAdrianmay

Powerbreak

Marshall PB100 Power BrakePublished on 08/24/14 at 14:57
(This content has been automatically translated from French)
Hi, im from spain and i need to buy tha msrshall powerbreak, is for sale yet?
»
kinder_guanokinder_guano

Marshall PB100 Power BrakePublished on 12/24/05 at 03:20
(This content has been automatically translated from French)
Features (7 / 10)

Go, once again home shopping ... What is it??

The only product Marshall useful!

It is a volume reducer output power amp.
One input, two outputs (8 and 16 ohms). A knob from 0 to -33 dB. But it is mono.

Use (10/10)

Using the simplest and most obvious!
This small boiboite (4kg anyway) is connected between the output of an amplifier HP and HP (or cabinet) itself, and can push the volume of the amp donf to have a wonderful natural compression or a crunch of the power amplifier, without ruining the eardrum, it reduces the volume after the amp (is that clear?). It transforms the energy ... Electric (?)... Output HP ... heat ... but it does not feel it.

...…
Read more
Features (7 / 10)

Go, once again home shopping ... What is it??

The only product Marshall useful!

It is a volume reducer output power amp.
One input, two outputs (8 and 16 ohms). A knob from 0 to -33 dB. But it is mono.

Use (10/10)

Using the simplest and most obvious!
This small boiboite (4kg anyway) is connected between the output of an amplifier HP and HP (or cabinet) itself, and can push the volume of the amp donf to have a wonderful natural compression or a crunch of the power amplifier, without ruining the eardrum, it reduces the volume after the amp (is that clear?). It transforms the energy ... Electric (?)... Output HP ... heat ... but it does not feel it.

Sound (7 / 10)

Fabulous when you have a 100 watt amp in the studio of 9m ² and neighbors ... old!
It has almost the sound of death that is paid in again, without the volume! It could color the sound. Certainly. Like any powersoak in my opinion, as now, the HP does not work like they had to handle a full load. But it happens a lot!

I found it really convincing on the section of a JCM900 molassonne low volume, it had just awakened the bousin (and upstream, he recovered an Engl 530). In short, it's the only time this amp sounded, but I digress.

Global Reviews (7 / 10)

Just when you need an amp lamp that is expressed only when the master is at the bottom.

The problem, thank you Marshall, is that it is mono. So if you have a stereo amplifier, must buy 2 ... and close to € 400 a piece ... (200 € in time, approximately).

But frankly, pushing his amp (tube, eh!) To 8 and not have ears that bleed, it is well worth the small concessions, right?

Petit added 13/07/03: Given that the power tubes working at full capacity, it will drop faster than if we play without the low-volume Power Brake. And we do not sound 100% Repeat '/ live, as the HP, them, they do not work much. But hey, it saves the bowls. And there's nothing nothing!

Addition, 24/12/2005: sold for a Weber Mass (% https://fr.audiofanzine.com/produits/avis/index 2Cidproduit 2C37350.html%) not good, then for a PGA04 Palmer (http://fr .audiofanzine.com / products / view / index%% 2Cidproduit 2C22681.html).
So many go through the Marshall than in the Mass, I think, or try THD Hotplate.
See less
»
Anonymous

Marshall PB100 Power BrakePublished on 09/05/08 at 04:22
(This content has been automatically translated from French)
Kesako?
If you own a powerful amp, you know it is difficult to operate in a small space. When the tube amp is impossible to saturate the power tubes and thus to enjoy their beautiful natural saturation.
How?
- Put a volume pedal in effects loop? Ineffective because it amounts to a volume knob replaced by another, so it will not saturate the lamps.
- To ask a converter lamps to replace the 6L6, EL34 and KT88 by other less powerful lamps (6V6, EL84 ...). Yes, but the sound is more than the original. In the same kind can be a switch to pentode / triode or change the speaker to a less sensitive (close to 90 dB). Again the transformation completely changes your amp and the back is...…
Read more
Kesako?
If you own a powerful amp, you know it is difficult to operate in a small space. When the tube amp is impossible to saturate the power tubes and thus to enjoy their beautiful natural saturation.
How?
- Put a volume pedal in effects loop? Ineffective because it amounts to a volume knob replaced by another, so it will not saturate the lamps.
- To ask a converter lamps to replace the 6L6, EL34 and KT88 by other less powerful lamps (6V6, EL84 ...). Yes, but the sound is more than the original. In the same kind can be a switch to pentode / triode or change the speaker to a less sensitive (close to 90 dB). Again the transformation completely changes your amp and the back is laborious.

The brake power is a power attenuator that sits between the power amp and HP. It works like a big resistor that dissipates a part of the power of the amp as heat. The HP receives less power = less volume.
Easy to install and remove (it's like an external pedal) this system is very efficient and reduces the power of the amp to the request.

How come this? a large box of over 4 kg (still) that is connected to the output of the amp and HP (with HP cables! if not by modifying the output impedance!). 1 input, 2 speaker outputs, a switch to choisr the output impedance (8 or 16 Ohms) and finally a button on the front to reduce the power output of the amplifier up to 30dB of loss of volume, in increments of 3 dB. Reminder: -3 dB = power divided by 2 = -10 dB volume halved. No external power required. An internal fan is automatically activated in case of overheating (never managed to heat at this point!).

Disadvantage:
- You lose the saturation of HP because they are less stressed. But it is a lesser evil compared to other solutions.
- The lamps have a shortened lifespan, but the wear is normal: at equal volume, they are most stressed, what logic you use the unit to a higher power!
- The sound is probably a little color, like everything that is connected to the amp: cables, effects pedals, ... But nothing really mutilate (it's not a vintage wah!) Me that does not shock me really, the sound is enough and what is actually respected by the PowerBrake compared to the reduction of stress on the HP?
- The price: more than 400 euros is very expensive for a large resistance. A book is already a very high-end amplifier tube. Bugera on all lamps, for example (which is cheap for the technology) the additional 400 euros to be balanced with the purchase of an amp higher-end. On a big Mesa Boogie or a big-Rivera, the question is less.

To conclude:
Reduction system effective power, its friendly, easy to use and install. As against expensive, therefore reserved for a small class of high-end amp. Hence the 8 / 10 because it is not really accessible to all.
See less
»

Tech. sheet

  • Manufacturer: Marshall
  • Model: PB100 Power Brake
  • Category: Guitar Power Attenuators
  • Added in our database on: 04/02/2004

We have no technical specifications for this product
but your help will be much welcomed

»

Other categories in Guitar Amp Parts & Accessories

Other names: pb100 power brake, pb100powerbrake, pb 100 power brake, pb100 powerbrake, pb100power brake