Filter
Our members also liked:
3.8/5(71 reviews)
32 %
34 %
14 %
6 %
8 %
Write a user review
Users reviews
- barouh
Still in doubt
Published on 04/15/12 at 21:01 (This content has been automatically translated from French)To record voice with an electret microphone.
Config + XP classic - I'll move to Windows 7 soon and i do not know I'll keep this sound card
UTILIZATION
The drivers have apparently never been validated for Windows
I work on Cibase 4 and will soon move to 6 under Cubase 64bit.
Excellent latency: this is why I bought the card M-Audio Fast Track Pro
GETTING STARTED
Compatibility with a keyboard M-Audio Key / Studio looks to me impossible.
I have so far refrained from using the keyboard but the installation has left deep scars from.
OVERALL OPINION
I used for 3 years but I could not solve any of the weaknesses I noted at the outsetRead moreTo record voice with an electret microphone.
Config + XP classic - I'll move to Windows 7 soon and i do not know I'll keep this sound card
UTILIZATION
The drivers have apparently never been validated for Windows
I work on Cibase 4 and will soon move to 6 under Cubase 64bit.
Excellent latency: this is why I bought the card M-Audio Fast Track Pro
GETTING STARTED
Compatibility with a keyboard M-Audio Key / Studio looks to me impossible.
I have so far refrained from using the keyboard but the installation has left deep scars from.
OVERALL OPINION
I used for 3 years but I could not solve any of the weaknesses I noted at the outsetSee less01 - royuthPublished on 02/06/08 at 01:10 (This content has been automatically translated from French)Nn
UTILIZATION
Nn
GETTING STARTED
N
OVERALL OPINION
APRS year I saw:
Bad converter, I do realize that because later comparison
Average quality hardware: fragile.
The power plant via the USB card with a disturbance ptite sector, it is then necessary to reboot the softs. The power supply is worth in this case.
The headphone amplifier is dead After a few hours of use.
Compatibility problems (repetition)
Headphone level too low (when there had one)
Pr-amp gain too low also. If you push it (typically 3 hours) the signal / noise becomes excrable.
With exprience, I will not repeat that choice. Even for the budget, it is better not to buy and ke…Read moreNn
UTILIZATION
Nn
GETTING STARTED
N
OVERALL OPINION
APRS year I saw:
Bad converter, I do realize that because later comparison
Average quality hardware: fragile.
The power plant via the USB card with a disturbance ptite sector, it is then necessary to reboot the softs. The power supply is worth in this case.
The headphone amplifier is dead After a few hours of use.
Compatibility problems (repetition)
Headphone level too low (when there had one)
Pr-amp gain too low also. If you push it (typically 3 hours) the signal / noise becomes excrable.
With exprience, I will not repeat that choice. Even for the budget, it is better not to buy and keep her in for something really useful like a small car with a bear mtal in that it is possible to move it up alone and plays music zipSee less00 - Anonymous
Are there better
Published on 07/18/11 at 09:57 (This content has been automatically translated from French)I was looking for a USB 2 XLR inputs, 2 outputs and troubleshooting.
For the config, I put 7
UTILIZATION
Drivers natively on Mac, and if I remember correctly, it was necessary to install a small software monitoring.
Second, I stopped playing 8-track analog and MIDI tracks with three blind effects and it was running.
GETTING STARTED
For a map in the amateur category it goes well. It is to start al.
OVERALL OPINION
I used 4 months and I sold. While the sound is correct, the race of the gain is at least strange. I plugged the card number and it's always the same micro. For three quarters of the race, there is almost no gain then the last quarter, is satur…Read moreI was looking for a USB 2 XLR inputs, 2 outputs and troubleshooting.
For the config, I put 7
UTILIZATION
Drivers natively on Mac, and if I remember correctly, it was necessary to install a small software monitoring.
Second, I stopped playing 8-track analog and MIDI tracks with three blind effects and it was running.
GETTING STARTED
For a map in the amateur category it goes well. It is to start al.
OVERALL OPINION
I used 4 months and I sold. While the sound is correct, the race of the gain is at least strange. I plugged the card number and it's always the same micro. For three quarters of the race, there is almost no gain then the last quarter, is saturated very quickly. The degree of finesse is binary. Sound / No sound.
No flexibility in short. I could keep it but I bear, I'm used to more accurately manage the gain.
In short, for a few euros more, I would not hesitate a native instruments audiokontrol 1
For a few dollars less, I would take a presonus AudioBox
And with experience I will not repeat that choice.See less00 - david_80
Has what for??
Published on 11/27/10 at 07:43 (This content has been automatically translated from French)Characteristic evoked by more, so we will not repeat.
It runs on iMac Driver
UTILIZATION
simple stable.
Use with logic, most notably after many plug KOMPLETE.
Miking guitar, bass, more sample vinyl ...
on the other hand I obtain exactly the same latency with or without the card.
For making sound, it lacks gain and it blows.
GETTING STARTED
Installation, config ultra simple. on the other hand I did not have the manual.
OVERALL OPINION
It would have been nice, but ultimately this card does absolutely nothing. I branch or not everything is borne by the processor of the iMac.
I do not do it again 2 times the same error.Read moreCharacteristic evoked by more, so we will not repeat.
It runs on iMac Driver
UTILIZATION
simple stable.
Use with logic, most notably after many plug KOMPLETE.
Miking guitar, bass, more sample vinyl ...
on the other hand I obtain exactly the same latency with or without the card.
For making sound, it lacks gain and it blows.
GETTING STARTED
Installation, config ultra simple. on the other hand I did not have the manual.
OVERALL OPINION
It would have been nice, but ultimately this card does absolutely nothing. I branch or not everything is borne by the processor of the iMac.
I do not do it again 2 times the same error.See less00