Ecler nuo2
Ecler nuo2

nuo2, 2-Channel Mixer from Ecler.

  • Increase or decrease font size
  • Print
  • RSS

All user reviews of 4/5 for the Ecler nuo2

  • Like
  • Tweet
  • Submit
Average Score:4.7( 4.7/5 based on 22 reviews )
 15 reviews68 %
 5 reviews23 %
 1 user review5 %
Value For Money : Excellent

frifrih's review (This content has been automatically translated from French)" Simple and effective"

Ecler nuo2
It is not rack it seems.

Two stereo Master level independent (symmetry in the other XLR RCA)

This is an analogue desk!

Effects loop

two lanes over a channel Micro (or Aux)


It's a mixer ... so it's simple
I use it without having the manual! (I do not use some functions so I have not tested everything, as the effects loop)


It does not seem that there have breath, but I have a little breath of my sound system anyway so I can not really test a priori, but the sound comes out clean the table!

The equalizer is effective with kill of each frequency band


I use it for 9 months or between CDJ MK2, and I'm very happy!
I do not use the effects loop which, it seems, is oddly conceived would be the weak point

What I like least is the curve (adjustable of course) faders and their length (standard I think) just mixes suitable for long but is very useful for general mixes (I think).
However the big knobs are very pleasant to use!

I tried quite a few models before this one, my old Numark any rotten, all types of Pioneer (400, 500, 600, 800) in clubs and also Denon.

The value for money is pretty good I think (I do not know if it is used in new but it seems to me that the price is more honest).

Now if I was looking for a 2-way table I think so, but I orient myself to a set more than 3 or 4 channels so maybe one of her older sisters (Nuo 3, 4) draw me more

leserbe23's review (This content has been automatically translated from French)" good food good sound"

Ecler nuo2
Yes Optional
connecctic rca gold plated for platinum
XLR x2


nikel simple efficaace


unn console out good sound whatsoever on the headphone and enceites
parcontre by contribution to the gain I can not cut completely but I think the c which is ca plf because I mix in my headphones at home c can be ca


I used the for a while and I am very happy that I like this I Kill tables c m is occasionally very useful, and c damage than other more expensive tables in which n is not n
J had a vmx Beringher a korg km202 numark also and my friend who is djm
qalite frankly op prices
I will remake choice but I love to spend Maitena has a good effect with tales integrated it's been 7 years since I mix of techno and hard techno and it's time for me to do but they are very expensive for me but in any case ECLER c ouf of the stuff I return this brand eyes closed

Anonymous 's review (This content has been automatically translated from French)

Ecler nuo2
Table not rack. plugs into any RCA if I remember correctly, plus another 2 channel for effects etc ... 3 dc in final.equaliser way that cuts frequencies, asser efficaced are departures of two effects on path, that n in the middle has not.


Configuration is very simple but all riders must be internal or opens the machine and add poury have access to the master qq decibels.
asser ADJUSTMENT not cross and not the possibility to cross an eternal ...


The console is clear, but it amplifies the low c clear. No it emits no blows above c cool. equalizer and cut out the sound and is well balanced.


I got the 1 year it was very well c lair except that there was not asser settings for the cross which would have t cool because I scratch a lot. The cross is very well ELSEWHERE d qd was my level . I did not keep the day as I bought a Tascam XS8 and after Nuo 3. j have much love ecler (c light) and I've found most flexible way to have 3 more real the possibility to put an eternal crossfader. otherwise J will keep nuo 2 if there were the same setup options and cross faders and the possibility to upgrade the cross with an eternal.

valka's review (This content has been automatically translated from French)

Ecler nuo2
No complaints.


No complaints.


No complaints.


I will not repeat all the good we can say about this mixer, the opinions are quite numerous and I have nothing to add. I am fully met by all its features, and certainly I do not regret my purchase. But in order to inform future buyers, I will be talking about small unless:

1) Always this little problem for its effects with EFX 500, depending on the connection (see the notice below, and in the corresponding forums).

2) The knob to adjust the fader curve. On this point, I preferred the three preset positions of the Gemini UMX-SE which seemed easier to use, and the most appropriate curves.

3) We regret that the crossfader is not reversible.


If I find as well as ECLER NUO2 next time, without these three negatives, I will be filled.

Anonymous 's review (This content has been automatically translated from French)

Ecler nuo2
At the technical level, it has inputs / outputs:
<ul> 2 phono (cinch in gold plated)
5 line inputs (2 High, 3 Low in cinch)
Between a microphone (jack 5 1 / 4)
A master output with an XLR
A cinch to master output 2
An output record </ul>

Otherwise, there are:
<ul> a 3-way table (2 per fader and a rotary by)
A pro-fader VCA crossfader Ecler (I think it is the same for channels)
SETTING THE curve for the cross
Rglage common curve for two channel faders
3-band EQ with complete kill for two main tracks
2-band EQ for channel 3 (micro-or L-Line)
Given nitre PFL mono and Master Stro
balance between headset and PFL Mix
effects loop with send one for each main track and possibility to choose enter pre and post fader </ul>

Fairly standard, we may regret the lack of XLR mic and Jack at the same time. For cons, the good point is the management of the effects loop with external pre / post fader.
Basically, on paper, a two-way table as well scratch that adapts to the mix.


Level interface, it is clear trs, there's the buttons that light up when they are activated to kill and select the PFL. It quickly blunders.

Large EQ knobs are super enjoyable handle.
I love the touch of faders. With a good glide lgre Resistors. They feel good.
The select cross curve is exactly what you would expect: the mode switch was progressive mode. As for the fader curve is a little less empty, but you can find a curve his taste in any case, even if it is not the position of slecteur that one might think.

Crossfader level, the mode switch not even cut 1 / 2 mm 1 or 2 mm from the edge. Ca me change my 2.5 cm to mute the sound! Finally, I can scratch acclrer routines ...

And if not, the surprise is the VU meter. Super readable cohrente graduation (not half as red as Pioneer). The level takes the Stereo Master output level record, so it's not influenced by the Master level 1 or 2. Nickel is to correct the gain of the current disc in a snap when you have not had time to do the calibration.


L t I bluff. Once plugged into my sound system, I finally heard the low super-rich.
I redcouvert sounds and rich sound of Młoda. Pure pleasure.

Otherwise, the channel EQ is good. You can really work on his his own way, has me changing my Behringer ...

I usually mix 0db level, with rare spikes 10 dB. So no the problem, the sound is nickel. I can even push my amp into a corner without saturation of the signal. I won efficiency. For story, for large bourrains who like everything is illuminated red will be served, was holding up. There's a big margin before saturate anything. Cal in all things red, his holds, and trs is not distorted. I understand a little better why Ecler SMAC Pro 30 silent teufeur a table (see how in a mix no matter how teuf, is the stuff that takes).


Bought in Germany dernire week, I finally m'clater with this in collection outdoor WE. A little mix of prs 7 hours and at other times a branch or a PC jukebox has not budged. Despite cuts juice and mosquitoes that are sailing on the table, no sound weird.

It's been over a year I was hanging on the forums Fran and foreigners (DJForums, DenonDJForums, UniversDJ and, of sr Audiofanzine). I intended to take effect in-house and four lanes, but what's to four lanes when it is not going to use 50% of the time? The same when nuo2 offers eight inputs, even if it is 3, max simultanne, has still sufficient. Otherwise, to the effect, test the APRS have nuo5 and Denon X-1500, I t's just the quality. Prfre I take a good multi-effects by 19 inches later. And it is that the Ecler nuo 2, 3 and 4 are the difference, management of externalities: their knob to send by the switch and pre / post fader. Perfect solution. For nuo2, one can get r-effects on channel 3: more than perfect!

So an excellent qualitprix for a table that can see far since we can add an external effect it flexibly. Plutt mix or scratch plutt? It's not a problem, will have to do in all circumstances and with quality.

We will use if my opinion changes ...