All user reviews of 5/5 for the Voodoo Lab Pedal Power 2 Plus

Snapping 200 euros (with Y cable 18v and two 1m cables) in a food always seemed absolutely useless. Again, Santa Claus came close drop me a Xotic RC Booster with rather than pedal power plus 2! But upon reflection, I had 7 quality pedals were connected to the power plant in my Harley Benton, a bit like a Ferrari F40, you had swapped the engine for 1 liter diesel PSA 9! So I did not, after a few sessions saving from a reputable psychiatrist to get the pill.
I received the object and then, after connecting all set, absolute miracle, the sound is not the same. As mentioned by other reviews, more noise, more clear sound clearer. Short! You discover the true sound you should have always have!
So to conclude this part of the chain is often overlooked if not forgotten, and it is wrong because it is based on an ultra professional.
And as Audiard said: "The price is forgotten, the quality remains."
For information: the famous SAG which reduces the voltage (5v to 9v) works by increasing the tension in the direction of clockwise.

Concerning all technical features of this power brick, Audiofanzine packed with information, and the site of Voodoo Lab remains the benchmark.
I do you would learn nothing more than the previous opinions, I'm just joining the mass to celebrate the high efficiency of this product.

As owner of a Pedaltrain, the mounting system is really a more dedicated, thank you both brands. Be sure of yourself before you start, however, must be dismantled a little box, which should probably cancel the warranty. The value for money is concrete, the machine seems indestructible.

I have not even used all the possibilities of the trick, or even dared to connect more than 8 pedals, which will be soon. I have not been able to compare with other bricks, but given the number of teachers who use it, I said it is not by chance that it is so appreciated.

Given the space available on a Pedaltrain 2, it would have been perfect with 10 outputs. But voodoo lab does is probably not stopped to 8 for nothing.

Otherwise, it's great, go for it!

I will not talk about the 8 isolated outputs and options via DIP switches, it is well explained dj trs.

I use this power supply for six months. I feed as much as 15 pedals with this toy: Korg DT10, Danelectro French Fries, Boss CS3, Maxon OD9, Marshall Bluesbreaker II, Boss DS1 Jap (ACA), Boss NS2, Danelectro Fish & Chips (I two), Boss CH1, Boss BF2 Jap (ACA), RC20XL Boss, Line6 Echo Park, Danelectro Tuna Melt and a single LED loop Loop-Master switcher. Before that I used with garlands and power supplies Boss One Spot. In fact, I had only rarely trs problem of ground loops before, but I have the problem NEVER, even when the electrical installation is to plorable (what the amp, he does not hesitate to remind me). Pedals for added fuel by daisy chain, I dbrouille for Spar those upstream of pramp and those in the loop, the risk of Reduces buzz is. Especially as the Voodoo accepts all the pedals for which it is Designed, even those rputes rcalcitrantes like Line 6 (by the way, this has always dernire t trs accommodating my gard).

A lot of cable are provided and, except for the 18V cable, they are fairly easy to find the unit. The power supply saves a lot of space over 8 collection outdoor stacked transformers, for a price (22 euros the transformer, but with options supplmentaires), which is not without intr t for a pedalboard. For owners of PB Pedaltrain, this PSU is for you. For others, for that matter. For fans of big-mga-pedalboard, beware one thing: the cables are 50 cm and no more.

I love the reliability and cleanliness of the power supply. As I am a geek, my set is expected to stabilize around 19 pedals (the worst part is that I use!), I count deuxime get one. Not that she is unable to feed all, but I will outlaw the garlands for good (2 + PP2 and three external transformers, has come under the pedalboard). And frankly, I do not even ask the question, what price, the quality and the size (MXR just released something a little more with 10 isolated outputs if I don ' abuse, but look well aa wide), no hsitation possible. When you have a PP2 +, unless you have a pnible pedals (40V DC or AC, or fat consumption, such Whammy if I'm not mistaken), you can not feed all prs , even in the center positive 9V DC with cable adapted. Above all, you do not ask any more questions. You have the very best.

Power supply not Deguelle Pedal (regulated power supply built into the housing).

- 1A (1000 mA) current.
- 8 miniswitches in the box to change the behavior of eight power outlets.

- 4 outputs 9v ACA (format barrel to barrel Boss Boss 5.5x2.1 negative center) switch with "normal" PSA Boss set. With switch "On" is the Boss ACA.

- 4 outputs 9v L6 (format barrel to barrel Boss Line6 5.5x2.1 5.5x2.5 negative center) b'en here, the Voodoo Lab power supply of a sudden becomes really more versatile than the power supply 'type Dunlop DC Brick . This power supply works perfectly with my L6 Line6 pedals, Aphex.

- 2 outputs 9v SAG (format barrel to barrel Boss Boss 5.5x2.1 negative center) switch with "normal" PSA Boss set. With switch "On", one can vary the voltage of 4 to 9V (with the small screw above the 2 outputs).

- A good bunch of cables: cables 6 Boss 5.5x2.1, 5.5x2.5 Line6 two red cables, a cable to jack 3.5 stereo (food, eh!), A cable "snap" to connect the 9v battery taken to square (excellent, you can power the pedals, which initially can only work with batteries, like Z-Vex, Russian Big Muff, etc).

- Output in IEC 230v 200 watts max (to feed such a Behringer FCB1010 midi controller, but certainly not an amp!)

- Dimensions
Box L = 15cm, l = 9 cm, H = 4cm

Led Power.
- Made in America.

In short, versatility frankly nice (just needs to be choosy, the adapter pedals reverse bias, but it's really to quibble!).

It's a big power supply 'ultimately very strong!

No background noise, ground loops, buzz, humm and that sort of thing.

A well-crafted documentation giving a lot of information about the types of food depending on the brand or models of pedals!

Welcome versatility, the Pedal Power can adapt to almost any 9v pedal market.
Well, yes, not possible to supply with my damn tasty but EH Electric Mistress in 24v, but it is the only of all that can go through the Voodoo Lab, where a DC Brick makes hands on too much 9v pedals.

I now have 3 pedalboard, 2 are fed via Voodoo Lab, and one by a DC Brick. Only because it has a pedalboard and a whammy wah, which take up too much space to put a Voodoo Lab, the Dunlop Brick can just pass.
The Voodoo is certainly a little more expensive but much more efficient and versatile than the briquette Dunlop. The accessories are also more likely.

Hop, a link to my opinion on the briquette Dunlop (https://fr.audiofanzine.com/produits/avis/index% 2Cidproduit 2C41490.html%)

Thank you for making me drool Lonewolf with its Voodoo! Glad I made this purchase!

... At the risk of rpter t say what ... we will not talk of CHARACTERISTICS, read jsute to Kinder.

I personally use it for a big year. I had to test several power supply diffrent just because I had a buzz fueling concerns of the two chains diffrent pedals with the same case. This PDAL rsout many concerns and really provided a power clean and constant.

The unit is solid trs apparently saw what it takes in the face for a year ... Only regret of power supplies and more OR 1 or 2 doses of 9V 18V for free (because if you have on your 18v ​​pdalier, will have to order a Y cable because not provided, and use 2X9V to 18v implacable logic ... but too bad considering the price of the machine!).
Another finding, positive is that this little heater power supply, despite the charge that I ask (Wah, Rotovibe, H2O, Reverb, Phase90, Gate, Tuner, Stereo Chorus 18v). Apart from the Y cable (if you need it) pack Frun cable is complete, nothing to say ...

Cel said it will take is a few small lcher uros, between 180 and 230 depending on where you buy (or store net province ...) but for a compact power supply that regulates and quality ... ben good we shake a little bit this month and the guys here we go!
I put 9 because I aimun 18v spar ...

This one of the most valued pieces of gear I have. There are other power supplies out there with the ability to power pedals with different demands but the pedal power is perfect for probably 90% of the effects pedal users out there. It provides clean isolated and filtered power through eight individual outputs all packaged in a tough little box. I previously used the Dunlop DC brick which is great for a few pedals but once you start using an effects loop or a wide variety of pedals it can get noisy.

All the output taps put out 9volts but can also be changed via dip switches to accommodate other power requirements.
-taps 1 through 4 can be set to power the older boss ACA pedals which I believe are 12v.
-taps 5 and 6 provide higher current for pedals that require up to 200ma like the boss dd-20 and can also be set to power the line6 4 series like the dl4 and mm4
-taps 7 and 8 have sag controls to simulate the effect that a dying battery would have on a pedal.

I've used mine to power a board full of pedals without issue. By using daisy chains to hook multiple low current drawing pedals to one output you can easily power more than 8 pedals. This works great for simple boxes but it is best to keep digital pedals, especially delays, on a dedicated output to avoid any issues from under powering. There are also many different types of coupling cables you can buy if you need to power pedals with different voltage requirements. You can combine two of the 9volts to get 18v or flip the dip switches and get 24v for things like the electro-harmonix memory man. The added courtesy out on the back allows you to plug in a wall wart if you have anything that needs AC power. This box will keep your pedal board tidy and as noise free as it can get.

specs:

Toroidal power transformer
9/12V (x4) – Standard 9V and 12V Boss ACA
9V (x2) – High Current 9V and Line 6 Modelers
9V (x2) – Standard 9V With Battery Sag Control
18V/24V – Using Custom Cables

The voodoo lab pedal power has been one of if not the most famed power supply out there today. For many reasons, it works, and the support is great! I misplaced one or two of the provided cables and emailed their support, they mailed me one for free and I got it in the next week or so! Awesome!

I've owned this when I had a semi medium-sized board to power everything. I ended up using every output and even the AC plug to power an extra pedal. My pedals have never stopped working or fried out on me. Though I've heard many worse stories with other supplies. It's also a decent size, not too big, though of course, if they can ever make them smaller, I wouldn't complain! I have never experienced any excessive noise though I don't notice it being quieter either. Ground loops and hum is not an issue of course. One thing, DO read the manual if you need to power anything in a special or unique or complex way!!! Make sure you plug the cables using the right ends for each input/output etc! I was lucky enough that I went after simple boss-like pedals and just one or two oddball pedals.

I've now simplified my pedal rig down to 3 or 4, of which use their own power supply or require nearly nothing to power. I'm trying to go boardless if possible and thus sold off the PP2. But if I ever had to build another board, the PP2 would be the one to power'em all! I'd much prefer this over any other power supply for the price. It's decently priced and well worth it!

(Originally written by Doc Plus/translated from Audiofanzine FR)
Dimensions: 5.9" x 3.5" x 1.6"

Pedal power 2 plus: 8 isolated DC outputs with a total of 1.1 A

Combining two outputs allows you to feed effect pedals requiring 18 V DC, 24 V DC and probably also 15 V (SAG output set on 3 V or 6 V).

The bottom side of the PP2+ is equipped with 2-way DIP switches (one switch per output) allowing you to choose between "normal" and another mode.

NORMAL MODE = all outputs deliver 9 V DC

1-4, 7-8: 9 V DC, 100 mA each (normal requirement for 90% of all effect pedals).

5-6: 9 V DC, 250 mA each = convenient for power Boss Twin and Line6 pedals.

OTHER MODE

1-4: 12.3 V, 60 mA each = useful for some Boss ACA.

5-6: 14.5 V / 12 V (unregulated), 50 mA / 200 mA+

7-8: 4 V - 9 V adjustable with a control on the front side, 100 mA each = simulates a used battery (interesting for fuzz effects, for example)

Provided cables: 6 x 2.1 mm cables, 2 x L6 2.5 mm cables, 1 x 1/8" cable (for Electroharmonix products, for example), 1 x cable to replace a battery.

An IEC 230-volt output is also provided, to power a Behringer FCB1010, for example.

Advantages of a PSU with isolated outputs:

1/ Since the outputs are isolated, it's impossible to have ground loop problems. Thus you can use the same PSU for your effects before and after the preamp.

2/ Since the outputs are isolated, it's possible to combine two of them with a special Y power cable in order to double the voltage. So combine two 9 V DC outputs to get one 18 V DC output. With a pair of 12 V DC outputs you get one 24 V DC output.

Voodoo Lab sells this type of Y cable but it's not easy to find. You can also assemble the cable yourself if you go to the Tech and Tips area on the Fulltone website.

Some might say "Hey, I could make a special Y cable to use a pair of outputs in order to double the amperage." Voodoo Lab doesn't recommend you to use such cables. On the other hand, Stomping Ground does offer such power cables. It's up to you.

The Burkey Flatliner and Six models are its only real competitors, considering versatility and reliability.