All user reviews of 4/5 for the Isp Technologies Decimator

pedal noise suppression, 1 IN / OUT 1; 1 knob threshold

UTILIZATION

easy to use

SOUND QUALITY

efficient pedal

OVERALL OPINION

A word of warning through:
except that the chrome paint is very fond:
- Fingerprints (even own )
- Stripes

the discovery of the day:
DO NOT TAKE THE SCREEN PRINTS ON CHROME PAINT!

never seen it: a coup cleaning and presto they fade ...

Not serious, but it's better to know, and it is a shame for this great pedal ....

noise gate size pedal Boss by such ISP
1 knob of noise from -70 to 10
1 on / off foot
Input 9V mains, battery location
not pedal True Bypass damage

UTILIZATION

I put the end of the chain behind the flanger, phaser, chorus, vibe, the disto ... and before the delay and echo, reverb ...

SOUND QUALITY

compared to the noise terminator Carl Martin, already the noise gate made his taff through, not just when you're not playing, it was still a little light breath when playing but it's still acceptable, it does not food dynamics is very transparent, on the other hand you feel when it is off and when it is lit, it means the breath very high volume, for me this is what I needed, it is effective and easy to use
I had fun putting a defective pedal in the chain whistling tested for its level of cut, it is in the 97% success rate as 100% even when I have a slight hiss but overall it is more than correct

OVERALL OPINION

between the ISP and the MXR smart gate were the two best noise in the market, I took the ISP because it was secondhand at 100 €, the price / quality ratio is more than adequate so no regrets ... I would do it, if she ever let me go I would take advantage to test the MXR

Noise reduction as simple as possible.
A knob to adjust the threshold, switch on / bypass.

UTILIZATION

I put it in the loop just before the reverb delay.

SOUND QUALITY

Compared to the boss (this is the only two that I know of):
I read the different ways to connect the boss (see the forum). I tried both in the loop and in front (with an A / B box, one after the other and true-bypass.)
Result:
I have not seen any differences between the isp and its bypass by against the boss so the sound is muffled. The isp is highly transparent. The effect itself is the same for both, it cuts net below a certain threshold.

OVERALL OPINION

I put 8 everywhere, but take it for what it's worth.
I use the effect continuously and I do not go absolutely clear even in his account. But if I disable it in distortion snores a lot. It fulfills its role perfectly. (Is not given either)

One small negative comment, I fed with a separate power supply because there was a problem of mass chaining. I do not know if it is recurrent, but hey, it's no big deal.

The ISP Decimator noise gate is an analog format BOSS pedal style (it is still a bit more impressive than BOSS).

UTILIZATION

Usage is very simple. Of a knob - 70db 10db to.
Turning and reduced: o

SOUND QUALITY

The reduction is very effective (too much if you exceed a certain threshold).
Personally, I always use selected in the effects loop of a Mesa F30 - 45bd.
Its saturated, it can clearly mark sighs, downtime and jerks, without distorting the sound and even on the clean channel ...

OVERALL OPINION

I use it for 6 months.
I used, I had not Berhinger noise ... But it is useless to the contrary, it added more of noise during the attack.
Well adjusted, does not distort the sound. Of - a 10db 30bd: the reduction is too strong.
Good quality / price ratio.
I would do this choice without hesitation.

Noise Suppressor format pedals, the Decimator me above the opening of the bobot: Casing is one of BOSS, no less!
Ms. pad, even one loose screw hand under the pad stack your checks, identical!
Well, it's super gun, all chrome: (watch out for fingerprints APRS an old Kbab families).
In one, an out.
9 volt outlet (- center), 35 mA. [edit] Barrel Boss 5.5x2.1 center ngatif
Chtite and red LED as well.
A Threshold knob graduated 10 -70 display all 10.
Made in Korea ... that price ...

She does dveloppe conjunction with the creator of the Hush by adding a trick chtit blablabla SPECIFICATIONS patent that allows you to better his job, including the staccato notes and all the subtleties of the game Pitit o a noise suppressor would base the street.
Rduction the hum of about 60 dB. De100dB more dynamic! It must have a sacred wafer, the keukine!

UTILIZATION

Nothing simpler. You put the knob at minimum, scratching his arm, it activates the pedals, and increases the level of the threshold until what was no more breath.
And it refines APRS, during a game

Normally it is recommended that the noise suppressor in inserting APRS all analog effects (modulation, EQ, etc., in general), and before the delay / reverb (numriques in general).

It is best to test all of the same DIFFERENT locations (out of guitar and before pramp before all the effects, etc).

SOUND QUALITY

Hop, they send the big guns: the pedals are raised in the insertion effect of my Engl Powerball, APRS all effects except the delay. I also test my pedals before modulation.
Upstream, a Jackson chtite SLSMG in EMG (81 and 60) and Lag Rockline ugly in Duncan (SH4/SSL1/SSL1), among others. And breath of all the single coils mamy Lag!

Well, I'll Epargne tests on all channels and go on the behavior-General for the pedals.

Knob at minimum (-70), saturated fat on channel 4, SLSMG. It blows. is incremented and bam! not even -40, has more background noise! I push toc for fun (10). The most carrment no sound! Awesome!
Well, hop, I play tranquillou: I try to crush my junk cat shot low frequencies and other palm mute, a little technique gaffophone.
B'en between each syncope (rhythm, not the cat!), Not a fart noise. But without me eat my sustain, without changing the texture of my sound!
Well, really clear that abusing the threshold (or such -10 0), we have more sustain, the sound is food. But there is no point to put the threshold too high, unless you have the 150 in a snap Roros PDAL mute.

Lag on, even rsultat: the asthmatic mamy do spit phlegm noisily over its single coils with wholesale saturax!

Well, returning to clean (with only ssl1 Lag in my Lony) must aussittdsactiver the Decimator, otherwise it could sustain the dcim rglage for channel saturated since the hum is not noticeable in clean these single coils. For SLSMG in EMG, no worries, the threshold of silent rglage most parsimonious, therefore clean, I do not eat to sustain.

But the effectiveness is bluffing!

OVERALL OPINION

I had a Rocktron Hush The Pedal (see my opinion (% https://fr.audiofanzine.com/produits/avis/index 2Cidproduit 2C39939.html%) on the thing). The shortcomings of the monstrous Hush pushed me to buy another noise suppressor, and I fell for the Dcimator, ultra effective and ultra chrome.

CHRE most certainly, but really useful.

Both the Hush is flipflaps trash, as long as the Decimator will stay on my pedalboard.

And loud and clear that day on I pass a rack config (we are still far!), It will be the Decimator ProRack to be in charge of small exterminatoin agaants noise, not a Hush!

This is a Noise gate analog format Boss chrome.
Unlike most Boss pedals, I was surprised by the weight of the pedal once in hand, and what we feel are in there!
It has an input jack In and Out, a cavity for a 9V and 12V input.

UTILIZATION

Config 'generally very simple, no need for manual, one branch, it presses on the button, and adjusted the threshold for suppression of sound.
It may be just regret that the adjustment knob is not more difficult to turn, because of the blow just touch the knob without express with the foot and setting changes.

SOUND QUALITY

Regarding the sound reproduction ... so there ... just a relief!
I play on Marshall tube usually in crunch channel, to which I added a distortion pedal, as you say that the slightest touch of rope directly sends feedback.
Once the pedal enclanchée (with the threshold set properly of course) is simply sublime, all the buzz is rotting my sound removed (without delay, if the setting is well done), there remains the essential Sound!
Small black dot (in my opinion), once activated, it is difficult to keep the sustain when we decrease the volume knob on the guitar, but you just turn off the pedal for this kind of thing.
I tested the noise gate in different parts of my chain (including effects loop), for now the best place that I found, is between my pedals and amp cover.

OVERALL OPINION

I use it now for five months, it's not really my first Noise gate because I used noise gates of multi effects pedals before, and we feel much difference. The mute is far less brutal and more "intelligent" to me.

What I like most: The robustness of the pedal, it does its job well, easy to use.

What I like least: The knob that could be better calibrated, price: € 155 normally, I took her back the US, I could have less of the shot. It is certainly cheaper than € 100 PKI Decimator G-String ... but I think it's worth every penny!

I would do this choice? Yes clearly

Noise rducteur pedal, although rack must not be bad either.
boss pedal type, a simple chrome knob, nothing more beautiful and it's easy.

UTILIZATION

A single knob, you can not go wrong, extreme simplicity.
the sheet that serves as a manual is not at all useful

SOUND QUALITY

This pedal gets preferences in the loop;

at first sight when you turn the knob the breath disappears little by little, it is well trs what is asked, there is no coloration of sound or decrease / Mount volume.
distortion in this pedal simply removes the totality of breath, while keeping your parasites so prcieux sound.
in short, like this: no breath, but here I find the fault of the pedal, certainly no noise when not playing, but the ds first note that redboule vla breath.
in fact the breath Rapar over the sound only when you play.
shame it's not perfect ..

OVERALL OPINION

Bon is a good pedal, even the best on the market according to Guillou et al.
then we must say that my amp is a peavey 6505, for his breath rput huge plain, but here I do not agree with those who said that this pedal is perfect, all dpend of APRS the amp.
150th bought, not given, but I had the best because of my breath important for smaller budgets and with less wind, the boss ns2 should do the trick.

edit, APRS 1 year of use, still good job, but the end rglage is not enough for me, my perfect rglage 1mm APRS is 40, hard to find, This plays a prs hair.
prices way too expensive in hindsight I lower the score of 9 to 8.