All user reviews of 3/5 for the M-Audio Fast Track Ultra 8R

8 USB external sound card channels with DSPs and internal effects processor.

Can be used as standalone prampli microphones 8 channels or as 8-channel mixer, according to rglages effectus advance on the computer.

- 8 combo XLR among - TRS
- 8 TRS outputs
- Between 1 - S / PDIF replacing the entries - analog outputs 7 and 8
- 8 pramplis Octane (which supports the XLR connectors among combo: the signal from among Jack disregard the pramplis)
- Between 1 - MIDI output
- Frequencies of chantillonnages supported: 44.1, 48, 88.2 and 96 KHz 16 bit and 24 bit
- Switchable phantom power supply for 4 channel group
- With attnuateur - 20 dB on each channel
- With among instruments and taken inserts on 2 among premires

USE

...dropoff Window

(Let me time to finish my opinion!)

IMPLEMENTATION

...dropoff Window

NOTICE GLOBAL

...dropoff Window

8 channel external sound card with USB 2.0 and DSPs internal effects processor.

Usable as standalone preamp 8 channel microphone mixer or as 8 channels, depending on the settings on the computer beforehand.

- 8 XLR combo inputs - TRS
- 8 TRS outputs
- 1 input - S / PDIF output that is used in place of inputs - analog outputs 7 and 8 when activated
- 8 Octane preamps (which supports the XLR combo inputs: the signal from the input jack disregard preamps)
- 1 input - output MIDI
- Sampling frequencies supported: 44.1, 48, 88.2 and 96 KHz 16 bit and 24 bit
- Phantom clutched in groups of 4 channels
- With Attenuator - 20 dB on each channel
- With input jacks instruments and inserts on the first 2 entries

UTILIZATION

This unit does not meet my specifications time sound card. Yes, because I always use Adobe Audition v1.5 invincible as multitrack audio software. Yes, I know, this software is now in version CS6 (as of January 2013) but there are two main reasons why I am hooked to this old version. First, it supports MME / WDM individually on each track in multitrack. It means that I can assign, for example, track 1 on the input - output 1 sound card, track 2 on the input and output 3 5, etc.., Which has been possible since version 3 (newer versions not tested). What happens is that since this version, Audition has abandoned support for MME / WDM benefit well on ASIO. And the kicker is that in version 3 at least, it is not possible to assign individual track such as entry and exit as ASIO, you can make these settings globally on all software. And secondly, version 1.5 weighs less than 40 MB, which is really a featherweight compared to around 240 MB version 3.0 - and it has not so many new functions. And I'm not talking about that later versions are certainly more severe. So, I still use version 1.5 with support for MME / WDM and all goes well ... until I have my hands this sound card M-Audio FastTrack Ultra 8R.

In fact, I tried it on a Windows XP SP2 PC and another PC but Windows 8 64-bit and you will not believe your ears: MME / WDM sound card that comes with not only support the first 2 input - output card. 8 inputs - outputs are supported by the ASIO driver only. And again, routing audio to and from the computer does not pass through the internal DSP sound card! Therefore impossible (MME / WDM so) to assign incoming sound effects or 8 inputs to route audio channels 1 and 2 of the USB bus.

So here I am "fired bullets." At first I did not believe it, I thought it was a joke! I thought it was the drivers that are incompatible with Windows XP, need a newer version of Windows. But no, it's not because the mixer comes with software drivers to work, it under XP. I even managed to drive the DSPs internal sound card from there.

I also said that perhaps no MME / WDM driver is supplied with drivers (that only come with ASIO drivers) and, therefore, in MME / WDM, the USB driver generic audio Windows XP that is used but no, that's not it either, because otherwise he would wear, if I remember correctly, the "USB Audio" or "USB Device" instead of the name of map.

I ended up injured because this subtlety was not mentioned anywhere in the instructions that came with that I consulted in PDF on the internet before buying. And I'm left with a device on the arms that I could possibly use as a preamp 8 channel microphone. For this point, I'm rather surprised by the good sound quality. Precision, cleanliness and discipline. Internal effects processor: a bit basic reverbs are very average. But now, buying a sound card 8 channel was more urgent to me that preamp 8 channels.

GETTING STARTED

Implementation quick and easy. Reliability depends heavily on the quality of the USB bus to which it is connected.

OVERALL OPINION

I'll have to separate myself from this card, one way or another. It's a shame because the 104 dB signal - noise, this was really tempting, especially at this price point ))

What I liked about this sound card:
- Its clean and precise
- Can operate as a standalone 8-channel preamp, among other
- All inputs are combo XLR-Jack on the back

What I hated about this sound card:
- The WDM / MME driver supports only the first 2 input - output
- Damage to the input - output 7 and 8 can not be assigned to the input - S / PDIF output for standalone mode, which would have allowed also to use as A / D converter and D / A 2ch .

The 8 pre amp and 8 outputs are handy.
We also used the spdif, not bad for pre amp used for a digital console. The drivers are stable

UTILIZATION

whatsoever directly under windows, max / msp or protools 8.

I used to live in wavelab recording with record 3 hours without worry, I have not tested under No PT8 (I have no confidence).

on the other hand I mix in 3 hours rec hiut PT8 track as a real hell, completely unstable, PT loses sync between tracks and the timeline.
PT obliged to reboot every 10min.
I do not so sai ca vien PT or card but in any case, poor rating for M-Audio

GETTING STARTED

Install quickly and without problems with the drivers from m-audio site.
Both XP 32 and 64bit win7. I've used the

OVERALL OPINION

for 1 year and a half before I loose what sournoisment in benefits.
She walked in my nickel, I Emene on benefits and my PC does not recognize it more!
I try on three different PC and MAC, nothing to do!
The card is recognized but can not be identified as a sound card.

And as usual, the SAV is absent, the supplier Algam do not want to support.
Single solution, SAV Avid Toulouse with a bad reputation, or the trash!

In the future are what I will ever be a choice, I do not know.
Today, it is hard to find a USB soundcard with 8 pre-amp.
And firewire is almost over, has the high-end PC.

The next will probably be a tascam.