All user reviews for the Ecler Smac Pro 20

Consoles techno
Connectors RCA Jack
VCA crossfader
Cut, Punch (PRO-20), Hard-Kill
Triple correction
Ergonomic fader
3-way
6 entries.
for a table of simple mix is ​​what it does best.

UTILIZATION

There is no easier to start c'set what is best.
His walk alone.
Manual super clear.

SOUNDS

Excellent sound,
The qualizer is quite effective.

OVERALL OPINION

7 months of use (02/2003)
Troit table but very practical, CUT / PUNCH also very practical, of rotational KILL economy.
jai tries a lot of other models, which c'set what the best price / efficacitsolidit (mostly).
no problem I do it again the same choice.

I use this table for a little over 2 years, I begin to see the limits but one thing is it is trs sr good quality!
A mixer plutt versatile, it can be used to mix or scratch (although the cross does not cut), is what to buttons and outputs.
2 RCA program whose level is adjustable indpendamment.
2 RCA phono + 2 line INPUTS, switchable (no plop or other noises in the speakers when you make the change).
1 RCA INPUT cohabiting with the MIC, which is JACK.
1 OUTPUT JACK headphone.
1 OUT REC (record)
Y lacks the effects return on this point is the only default that I found.

UTILIZATION

The table is simple, beginners or not any user should be able to do it quickly. Mme not need the manual so this table is intuitive and the buttons easily accessible. The touch is trs enjoyable all the usual knobs have a stop in the middle of the race, and over time the accuracy is still to go, no play The crossfader when he is flexible enough It's a shame I feel a little apprci Resistors but it finally did and if you want to scratch the cross is perfect, and until now no problem reported.
The faders are a little inclined, it's a bit Drout at beginners, but you get used to rev faster, and finally the movement feels more natural than conventional faders (vertical).

SOUNDS

The sound is fluid trs, trs of good quality, I can not compare to the other tables, but it probably competes with the Technics or Vestax tables. The breath is not to go, fine. As it is the qualiseur trs good quality and kill buttons s'avrent trs practices.

OVERALL OPINION

What I like about this table is its simple but effective ct. The design is weird, but the buttons are well spaced standards, while the table is all fine and the height of a plate, it's weird to beginners, but an impression of strength DGIG .
The default for me is primarily what it lacks, this means a return effect and an adjustable cross. I see nothing but blame him, it is almost perfect for this price CATEGORY (FF 2300 bought the era). May be that today we can place it in the CATEGORY table aging but they almost legendary.
If I repeat this choice may be that I will opt for the SMAC Pro 30 possde that I blame her little sister. But today I am happy trs trs trs well and is suitable to my needs.

See website
sufficient

UTILIZATION

Config classic online blandness trs enjoyable, not great cross for scratching (0.5 cm white) I used to mix external Traktor DJ Studio, it takes up little space, there's the kill, of which qualo dscendent very low, very practical, well made, very solid, a table that can Burin and snapping the fader without inquitude ...

SOUNDS

No wind, just with a little amplification, but no more than another good big sound, effective. qualo impcable

OVERALL OPINION

There's better but still on a good table trs
I like its size and fader, too bad that the RCA y'ait derrire but good considering its size ...
rcupre a buddy, if I had to buy it I'd have rather taken a HAK (top to scratch) or Nuo (which are not bad too).
it is a mark of confidence I am, I stay!

Analogue DJ mixer rack not:
<ul>

3 pairs of 2 with prampli phono / line and 1 with prampli mic / line

RCA connectors exclusively except for the headphone and microphone input jack (6.3 mm) + 1 single ground terminal for turntables

For inputs with phono pramplis, rglages possible: Selector phono or CD, gain, treble, mids, bass, PFL activation, activation of the Isolator for acute mdiums and low cut , punch, volume fader and crossfader

For the pair of them with micro prampli, rglages possible: Selector mic / line, gain, treble, bass, PFL activation and rotary volume knob

2 outputs with spares rglage output volume

VU meters sensitive until -20 dB

Small Dimensions: approx. 14 cm wide, 36 cm deep and 8.5 cm ))

</ul>

UTILIZATION

This is my Premire DJ mixer, I use it primarily to make DJ mixes between my Yamaha DX200 and my Yamaha AN200, the expanders mainly techno - trance.

Easy to use and effective, it is unfortunate that the crossfader does not lower the sound ds you start dragging from one another when extrmit gives way to the sound of the other pair of channels. In fact, its decline only after the middle of the cross-fader crossed, causing a "bump" sound not enjoyable entandre trs. especially during slow passage of a pair the other channels. But hey, a DJ mixing desk so small is relatively hard to find. Imagine it is the depth and height of the turntable ^ ^ Too bad that its output is not XLR (but with little room for the small fact that we can not do otherwise gure) ... Too bad also that there is no dpart or effects return, it would t particulirement useful, especially for the microphone ...

SOUNDS

Trs sound correct ^ ^

OVERALL OPINION

A DJ mixing desk so small, it is difficult to ask more. Except for crpss-fader, all the rest, it is only good ^ ^

Its assets:
<ul>

Small ))))

Buttons and CUT PUNCH

Faders up remarkably well throughout but (like most of the other buttons for that matter)

</ul>
Its default:
<ul>

The cross-fader: Too bad middle of the cross is that the sound stops rising and begins a ct down the other.

No dpart + effects returns, damages, especially for the pair of accueuillant between the micro :-(

That's all ^ ^

</ul>

See posts below for the technique, this table fits in a nickel between two flight SL1200.

UTILIZATION

Configuration very simple, two slices equalo 3 bands (normal), two masters, cuts and punch buttons (good for hip hop I think), and kills about 3 strips not too badly screwed.

SOUNDS

A rich and precise, but after two years of use, you lose a little quality. She began to blow softly after 2 years (inaudible high volume). PFL circuit a bit garish, I did not like.
The sound is loud enough, but it felt like to be faster after a race of earnings or the master. Memory of the master meter comes quickly in the red (always less than DJM). But overall it's really good sound level.

OVERALL OPINION

Used 2 years, 2 x 8 hours per week. Coupled with a LUCAS 600, it makes not too bad.

The functionality of this mix is ​​good is compact without being tiny, functions available. And above all it is robust, which is appreciable, we feel that the knobs are tight, nothing moves.
If it again without hesitation.

See below ...

UTILIZATION

Trs conventional configuration, the buttons are quite close but it is a compact console ...
The faders are sturdy, the qualiseur is good. As against the cross fader is not configurable.

SOUNDS

The sound is good even if it blows a little (at the same time it is not new). The VU nitre up quickly in the red but in fact do not care ...

OVERALL OPINION

I have for about 3 years but I used very little, just to mix with Traktor other time. What I like is that it is compact and that I regret is that it is not suitable for scratching (I want a plate but if I have to buy back a mixer will cost a candy ) ... I do not do it again this choice but I think my next investment will be in the Contents of the same brand.