All user reviews for the Synq Audio SMX-2

Rackable: No
Conection in: rca jack, XLR
out connector: RCA master, rca return XLR master
box almost useless effects due to the button layout that mix with those reading sd card and built mp3.
5 buttons and 5-way selection of tracks
Filters 1 low, medium & high channel.

UTILIZATION

rather complicated general configuration when it is used the first time, the buttons are too big filters are sometimes jump. The channels are too close to each other. (We seem to see the concentrate on the huge, sorry if that sounds vague)

Manual: I've never seen

SOUNDS

Transparency: I have worked with in the club and always a lot of noise around.
filters work pretty well.

rendering with microphone is pretty good

gains tracks are sometimes too sensitive and cause errors

OVERALL OPINION

most: sd card reader, good connectivity, channel selectors.
least: box unattractive effects, large buttons little space and visibility.

I use it for two months and it is wonderful!
Good use of effects and recording take one week to understand but after it goes very fast and it's very simple. Changing channel is super convenient for me who likes to vary from pc platinum CD etc ... This stuff really too hard! The sound recorder is a little weird, home to over five seconds off the rails and jumps it: s last I wonder if I have many SD cards more 2.5/mbps! Otherwise it is perfect, the effects are well done! Especially filter and others. For the update against the table for me is impossible. I do what is marked in the book but nothing was done, it does not update ... to see.
Also a little damage to the BPM counter but it's true that I do not use it much. Otherwise the apartment 2-3 trifle, it is exellent!
Buy the serious!

UTILIZATION

- The general configuration is it simple? yes
- The usual functions are they easily accessible? yes
- The manual is clear and sufficient? Very well detailed but I was not able to update it anyway: s

SOUNDS

Nickel Tones

OVERALL OPINION

- How long have you use it? 2 months
- What is so special that you like most and least? change channel
- Have you tried many other models before buying it? the numark 950
- How would you rate the quality / price? exellent
- With experience, you do again this choice? ... of course!

12 entries (2mic + + 7line 3phono) on 6 channels (5faders + 1DJ mic)
DEnter matrix switches to a max. of flexibility reverse all entries in 1sec!
2 Master outputs:
Master1 signals with limiter (XLR + symtrique cinch / RCA asymtrique)
Master2 (cinch / RCA asymtrique)
Gain and Tone SETTING THE 3-band kill function with-30dB on all channels
VU meters with LED peak memory on all channels + Master
Easily replaceable VCA faders with curve SETTING THE on all inputs.
Easily replaceable VCA crossfader with curve SETTING THE (trs smooth transition  direct)
Allocation of channels A / B crossfader
Sampler Full trs (16bit / 44,1 kHz CD quality):
Works with SD cards up to 512MB (almost an hour dchantillonages card!)
Max. 100 memory banks of 5 each Sampling SD card!
Polyphony: 2 samples ranges can be reproduced at the same time
Rglage loops with the starting point and end.
Input / output each channel driven Sampler
Fully automatic beat counters
Startup by Cross fader compatible CD players
2 fader mixing effects according to the tempo synchroniss
8 digital effects synchroniss the tempo:
Echo
Autopan
Flanger
Manual filter (Frquences pre-programs the DJ)
Auto filter
Reverb
Trans
Pitch Shifter
Stro Effect send / return (to connect an external effect).
LCD screen displays information about the effects, sampler and beat counters
Effect Cue function
Talkover adjustable for micro DJ
Pr COST efficient mixing with cue / pgm
Loading new software possible by SD Card.

UTILIZATION

Accessories
Mix House electro

SOUNDS

No breath no spitting (just background)

OVERALL OPINION

I just acqurir the SMX 2 Synq home, I mix in with the club of Pioneer DJM600 so I wanted to test all costs Synq club after one week of training here I am in control 2 of SMX Synq club silent stupfi I work BEGLEC, perfect sound, Beglec thought everything about each of the five lines we can assign any input, so here I am along with the SMX 2 and Pioneer and return home: p I thought that if BEGLEC go for a good product and it might be compared to the larger style DENON or PIONEER ECLEREE.

I recommend this mixer is really the Small Wonder BEGLEC home.

Reasonable price for this style of mixer do the big name that better watch out

Console rack (with the adapter 19 "), 5 tracks, all inputs are assignable to all channels, effects Intgr good value / price, RCA and XLR connections for output balance, sampler, which runs on an SD card, fader start function, 3-band EQ (-30, +10), curves, sliders, adjustable crossfaders, based crossover effect, VCA faders and crossfaders interchangeable (even during operation of the table if seed for a mix!) j forgets passont but probably as a result.

UTILIZATION

Very easy to use, I took the machine in hand in less than 5 minutes, everything is simple and quick to ACCS, faders and knobs are solid, the screen is easily readable on the other hand, as on my TTX, the BPM counter does not support the hardcore-techno (shows half the bpm to 220bpm he has a record 110 m poster!, c is good but okay I m not used!) effects are assignable to each tract or direct the master or the crossfader! manual clear and simple (it's not a computer so it quickly view)

SOUNDS

Console transparent background low enough, EQ-30 is effective (the kill would have been nice +!) I use cells consistent elektro + and it sounds as well!

OVERALL OPINION

1 month of daily use and so far no PB is a versatile console (lambda mix or scratch and thanks to the avant-garde mix different functions of the sampler and effects and crossover effects, I tried vestax, numark, technics and on the other I forget and I would say the SMX2 not be ashamed for its price (I have the pay 549euros !!!), c EQ is not the PMC37, but they are very good road, very good report quality / price, I would do without this choice PB.
edit of 01/05/08: from the time that I used (August 2006), I still do not blame him! excellent dj console!! I even plug in a roland mv 8800 it and the sound comes out and nickel with big bass! pity she is not much recognized in the middle of the mix!, I really do not want to change to another model!

Complete feature on the site Beglec

Powo system and no breath coming from the console)

equalizer is relatively efficient (kill -30 dB), although a direct kill function would be interesting

OVERALL OPINION

I use it for two months for club and studio, I am now very happy with this choice of console that all but one of great price too high compared to its competitors.

the only "negative" that I found is the max SD card (512MB product obsolete now)

I board tried DJM 800/1000, DNX 1500 and 5000FX

In hindsight, I n'ésiterai not have to repeat this choice later, IT ALL A BIG." rel="ugc noopener" target="_blank">http://www.beglec.com/home.php?lang=FR
Beglec.com - Home

UTILIZATION

In a very simple and intuitive use of 95% only use the sample I have to open the manual itself is well detailed

SOUNDS

The console contained a very clear (connected to two Powo system and no breath coming from the console)

equalizer is relatively efficient (kill -30 dB), although a direct kill function would be interesting

OVERALL OPINION

I use it for two months for club and studio, I am now very happy with this choice of console that all but one of great price too high compared to its competitors.

the only "negative" that I found is the max SD card (512MB product obsolete now)

I board tried DJM 800/1000, DNX 1500 and 5000FX

In hindsight, I n'ésiterai not have to repeat this choice later, IT ALL A BIG.

See above

UTILIZATION

Use mobile disco style general, see also house and tech house. It is very easy to use, the manual is clear. You still have to memorize the function of the sampler, especially for banks or erase some samples in a bank.

SOUNDS

I find it pretty transparent. Warning, this is not a console that is used in the studio, it is used usually in rooms more or less, or not at all acoustically treated, then the transparency ...... As a sound engineer, I find it very correct.

OVERALL OPINION

I use it for over a year.
I tried Stanton, pioneer. For my job I use mainly yamaha, soundcraft. Honestly for a machine at this price ... it's worth it. If I had to buy a mixer dj, I do it again this election, especially for his sampler imcorporer. practice to record basic music and also jingles.

Table 5 channels + 1 channel mic with DJ talkover switchable and adjustable.

Entries:
7 inputs including RCA 4 line + 3 phono switchable line.
2 microphone inputs with hybrid connectors Jack / XLR
1 Effect Send & Return on RCA

Outputs:
Master 1 on RCA or balanced XLR
Master 2 RCA
REC output
Switch Stereo / Mono

The inputs are assignable as required by the selectors on each channel.
Tri-band EQ on each channel, but which do not cut total.

Fader Curve Adjustable.
Adjustable crossfader curve.

Effects section is configurable and assignable to a particular channel or channels assigned to the on side A or side B of the crossfader or the Master.
In addition, effect "crossfader" apart, but anecdotal.

UTILIZATION

Configuration could not be more simple, like any mixer ..

Faders & crossfader slide well, by setting them against the curve is not accurate.

A first section affect crossfader is completely missed: it proposes to call, moving the crossfader, a loop on reading in courses that shortcut, and as to measure the progress of the cross, or choice a pitch down, but the effect is rarely successful. And partly because of the cut too frank when the race reaches the end of the crossfader.

The second section of effects is much more successful. But with big black dots:
-The worst is when the shift triggers a sound effect. Sometimes it means. Looks like a CD that skips .. And it hurts the heart.
In-kind horrible, it has the effect parameters on notched knobs, which will require several turns to increase a parameter! Absurd because really cumbersome to use. We can push it to increase the rate of change of a parameter, but this does not work where you really need: the filter! Make a Low Pass fast, on a whim "I feel good now" (or 20kHz) is impossible, because too many requests knob towers. Must prepare in advance because we will usually 0 by: High Pass on one side, low pass each other. Anyway, hello tendinitis.
-The reverb has a sound yucky ...
-Feedback from the echo am not quite in time, too fast even mitigation thoroughly.
-Other effects, less important to me, seem correct.



SOUNDS

The sound is okay. It does not transcend anything. No breath.

Equalizers, as said before, are not a total cut.

OVERALL OPINION

I've had a year and a half, the value seems good

No reliability concerns. It is like new ..

Too bad the effects are not more ergonomic ...

I will not repeat the same choice. Here is a table that does everything, but moderately good. Next, I want a table that comes out a sound of hell, faders and equalizers flawless, the rest being small.