All user reviews for the Audio Innovate AEM-100

First I was frankly impressed by all the connections available!
At any one can connect more than 8 lines, including two that can be found in THE facade of the mini jack.
There are two jacks for headphones, a mini jack on the other wholesale ... and everything to match. At the back we find the XLR balanced out for the master or the RCA.
There are also two separate channels for the microphone and starts two faders for those interested.

UTILIZATION

The basic use of the table is fairly simple, not need a user manual to get by.
All functions are found in classic look.
To be honest I have not read the manual

But what this machine is tearing effects. You have available: a phaser, a digitalization, a high pass filter and low-down, a noise and a Slutter! Used separately or all together!

Add to this innovation that attracted me: the integrated oscillator which apply all the filters, producing sounds: SICK! However we must learn to manage the early ca parrait a bit surreal, but we soon learn to use it (for me it's the first time I played with a tone generator).

Only drawback, reading the table is not obvious at first. All buttons are alike and was a bit lost in the functions at first. But once you understand the logic of the mixer is adjusted.

SOUNDS

For now I used this mixer at a party and its only me parru really explosive. I first tried at home on my monitor speakers ... nothing to report, no breath even when the gains are mounted.

Equalizer is particularly powerful, only problem is in equalize faders and personal is not my cup of tea, but would appear to be in fashion on the EQ hiphop.

OVERALL OPINION

I use it for a month.

What I like most is all readily available filters that can be put in PFL before launching them on the master. What I like least is the faders for the EQ.

I've tried a variety of tables, but the sound generator built really opens a new door to DJ: I LOVE! There is only one feature that I do not, it starts available faders on each side of the cross (THE PRO X FADE, please) that will initiate cuts premettent or more stars or less along the curve with parametric

For the price / quality ratio, I'm kind of reckless and I bought it to try. I'm disappointed in any way for the € 740 that I put into it: it's definitely pro gear. However the price of this new table fell to € 590, and I want to say "rahhhhhh".

Other than that, by knowing I would have even paid for it. When we see already the price of Pro X Fade separately we say that the price is very suitable.

In conclusion, a beast to try for those who want to change their traditional VESTAX mixer which provides for the same price three pots and two faders.

I have bought without being able to test it before, attracted by the carractéristiques like the pro x fader, the fader cuts and effects, I have taken the plunge, hoping to have my € 600

After one month of use, here are my impressions and reviews about this mixer that brings a bit of fresh air mixers on the market with its share of innovations

I will try to avoid repetition with the opinion of Philmk8

connectors impressive, very competent (though seen in 1 & 2 jack 3.5 "front and the headphone jacks JACK 6.5" and 3.5 ")

UTILIZATION

First table equipped with the famous series --- --- PRO X FADE to electricbreaks,
Once the stops set correctly, THAT IS TOTAL HAPPINESS! supersoft
hyper precise cut, net & clean, a real treat for the crab !!!!!!!


CROSSFADER BETTER WORLD ! ! ! (Dixxit swifr Rob, A track, 2tall, DJ KODH among others ...)

While the buttons faders cuts are very good, but pity that by putting the cross fader to off the sound of the two channels is 100%, not 0% (so we could control the aurra 2 channels with fader cuts in " in "& not the one in in the other as out (have to get out of sync is not always clear (from scratch while cutting the sound of the instrument with the cuts in" out ")

ERATUM : Mr Elliot Marx (craéteur audioinnovate and admin of the forum) m 'learned that you can put the fader cuts of 2 channels in the "in" putting off of the crossfader and linefaders 0%


The fader cuts are not bad either but it was better than aurra whatever the position of "cut time" the "in" or "out" continues when the button is pressed (in not only "cut time "Max)

Apart from this detail, that is really screwed up (less than 2 milliseconds of response I think) after that is a matter of habit, but when we control for the scratch it a lot easier combos (combos technique )

with the effects: low pass filters high pass & are great (to remove or add the frequency from the top (high) or down (serious)

DIGITIZER is really the bizard, I do not see how we can do something good with open has not even 10% it changes the sound, ok that is funny, but most can not recognize at all the music played (ditto on faz to scratch, too fast and distorted beyond recognition ...)

it is clear that it is for use with the sound generator that with an audio source (or sound chelou to be a great space trip)

Stutter on the big disappointment because that is exactly the function I dreamed to be able to cut the sound while staying focused on my scratch myself without having to graft an arm 3 ... but it is not clear at all ... not very clean shall we say ...
only useful for the scratch but really too bad that the break is not clear on a regular basis without making a "click" sound because dsur to cut a rhythm (drum snare ... silence ... ... it aurra been magical if it had been developed)

However, it is Tripp and offers lots of possibilities and combinations when it is applied to the sound generator or FAZ to scratch

button "engage" the phaser misplaced (it was + aurra accessible right in not "trapped" between two knob)

too little space between the pots by the way, ok y 'has a package must be placed on a surface rather small but turn the pitch and the gain of the oscilator same time it does not ...
I still I have the hands of pianists if I hassle with my fingers for that is that it has been for those that have all of boudinnés ??

the same for the fader to the bass EQ on channel 1 too close to the MIC gain 2

SOUNDS

The master password for my 2 older mixers before arriving at the receiver to fine tune the EQ. I will test well with monitors even what happens ... but the general level parrait me just fine (although I'm not an expert PA system, and haven 't yet afford to have speakers worthy of the name)

surprisingly enough not KILL TOTAL EQ on! 0, we still hear frequencies (for my part I can overcome thanks to the EQ of my Reloop Scratch 2 connected in series (which also fade them completely cut the signal )

To register for cons, I mix with MixVibes PRO 6 and n 'with that sound card (pci) 4entrées / 4 output j' record through my sound card built-in, I have one so its not that good with scratch too high in the treble (but nothing to do with the AEM100, we will have that I look at the issue in tampering in the settings of my sound cards)

OVERALL OPINION

I use it for 1 month
I love the high pass filters low pass & génialissime the fader cuts and of course the PRO X FADE

happy with the purchase on all but disappointed in some respects, the use being principaleent oriented scratch & turntabilsm you should be fine
but very bad for the Stutter, digitize, and above all the settings upfaders faders and cuts (which can not control that only one side to the same function (the cross to be 0 for a canal, a fader cuts must be set to "in" the other on "out")

but that is indénniable this mix offers many posibilities previously unexplored ...

I hope therefore that the number of critical n 'effraira too, this mix is the first branded product audioinnovate (which leave the AEM100i without cuts and with fader settings linefader)

I assure you that IT IS WICKEED . .

PS: Have a look FORUM, I 've created (among others) a topic on the improvements to be made ​​into the mixer ULTIMATE ...