Not satisfied with those reviews?
Filter
Our members also liked:
4.0/5(2 reviews)
100 %
Write a user review
Users reviews
- davidvaldor
proud when even a date
Published on 11/12/11 at 14:07 (This content has been automatically translated from French)The mixer smd.2 have-been tried and here's are my feedbacks,
Good points:
1- potentiometers and sliders are soft and seem very good quality (assumed to be the VCA)
Between 2 XLR microphone combo jack
3- XLR outputs and RCA
Many of 4-
5- blue LEDs light meter are beautiful
6- nothing obstructs each side of the cross fader
7- adjustable crossfader curve
8- desing beautiful and classy enough class
9- equalizer which possde the kill
Bad points:
1- I do not t able to use the usb port '' input output + '' I had a mnessage of Reure, is there the driver somewhere?
2- There is no rack support, this is very important for suporterle mixer between my two Technics Sl-1200 mk2…Read moreThe mixer smd.2 have-been tried and here's are my feedbacks,
Good points:
1- potentiometers and sliders are soft and seem very good quality (assumed to be the VCA)
Between 2 XLR microphone combo jack
3- XLR outputs and RCA
Many of 4-
5- blue LEDs light meter are beautiful
6- nothing obstructs each side of the cross fader
7- adjustable crossfader curve
8- desing beautiful and classy enough class
9- equalizer which possde the kill
Bad points:
1- I do not t able to use the usb port '' input output + '' I had a mnessage of Reure, is there the driver somewhere?
2- There is no rack support, this is very important for suporterle mixer between my two Technics Sl-1200 mk2
3- output power while Little, On channels is acceptable, but not everything posde little gain, master max is 0dB + 6dB and not specially exit of headphones, max is not good enough sometimes ...
4- master saw semble meter to show too 2db lower
5- inconue brand for the service and the pieces will be a difficult thing (crossfader and Service Manual), as resale
6- aun bit too much background noise when the master is high-level ...
7- no inversion nterupteur (Hamster)
8- The beautiful little gray buttons covered with silver paint shall soon lose their luster.
Overall rating 7/10
Not after two weeks in my possssion.
David Levasseur
USE
No manual but had forgotten there was a beautiful catalog in the box, with https://fr.beglec.com/ of equipments to buy directly from China with sales08@beglec.cn in colaboration with http: //www.aliexpress.com/home2.html of where I discovered the whole system and also jb brand that is just the same damn thing is their low-end brand ...
It's so simple to use as well located.
SONORITS
Sounds good, a bit of background noise if the master is lev but then buries the music.
NOTICE GLOBAL
Included a small photo of my adj xdm 3633 mixer kit with my sl 1200 mk2 all white pimp ... I wanted to learn how to scratch anymore, so I pogn the smd.2 because he has EQ 3 meter band and saw the ins and outs. Compar a pmc 05 pro and other ... When I rinvestirais much it will be a big Rane 57 with midi functions as the pioneer djm 800 '' too kool 'is not ben ben ddi scratch or as a Serato has me.See less00 - davidvaldor
even when a proud day
Published on 11/12/11 at 14:58 (This content has been automatically translated from French)The mix smd.2 have-been's Tried and here are my feedback,
Good points:
1 - The knobs and sliders are mild and seem very good qualities (assumed to be VCA)
2 - microphone input XLR combo jack
3 - XLR and RCA outputs
4 - many of
5 - the blue LED meter seen are beautiful
6 - nothing obstructs either side of crossfader
7 - adjustable crossfader curve
8 - beautiful desing and classy enough class
9 - Equalization who has the kill
Bad points:
1 - I was not able to use the USB input + output''''I had one of mnessage éreure, is there the driver somewhere?
2 - There is no support rack, this is very important for suporterle mixer between my two Technics SL-1200 mk2
3 - Lo…Read moreThe mix smd.2 have-been's Tried and here are my feedback,
Good points:
1 - The knobs and sliders are mild and seem very good qualities (assumed to be VCA)
2 - microphone input XLR combo jack
3 - XLR and RCA outputs
4 - many of
5 - the blue LED meter seen are beautiful
6 - nothing obstructs either side of crossfader
7 - adjustable crossfader curve
8 - beautiful desing and classy enough class
9 - Equalization who has the kill
Bad points:
1 - I was not able to use the USB input + output''''I had one of mnessage éreure, is there the driver somewhere?
2 - There is no support rack, this is very important for suporterle mixer between my two Technics SL-1200 mk2
3 - Low power output on all channels on it acceptable, but only a small gain Posed, master max is 6 db 0db and especially not the headphone output at the max n ' is too many times ...
4 - The meter displays main 2db too low
5 - inconue registered for the service and the pieces it will be difficult thing (crossfader and service manual), as the resale
6 - aun little too much background noise when the master is at high level ...
7 - no nterupteur Reverse (Hamster)
8 - The beautiful little gray buttons covered with silver paint shall soon lose their luster.
Overall rating 7 / 10
Noted after two weeks in my possession.
David Levasseur
UTILIZATION
No man forget it but there was a beautiful catalog in the box with the equipment https://fr.beglec.com/ to buy direct from China with sales08@beglec.cn in colaboration with http:// www.aliexpress.com/home2.html of where I discovered the whole and also the mark jb system is just the same damn thing is their trademark low-end ...
It's so easy to use well placed too.
SOUNDS
Sounds good, a little background noise if the master is up but the music then buried.
OVERALL OPINION
Included a small photo of my kit mixer adj xdm with my 3633 sl 1200 mk2 all pimp in white ... I wanted to learn to scratch more, so I pogne the smd.2 because it has 3 band EQ and meter seen on the ins and outs. Compared to a pmc 05 pro and other ... When I reinvest much it will be a big Rane 57 with MIDI as the pioneer djm 800''''is not too kool ben ben dedicated to a scratch or serato as for me.See less00