Published on 06/02/06 at 23:48
- As you can see in the picture, the table is rack
- 12 entries commutablent 4 channels that you can assign two outputs on Master 1 and / or Master 2 by two small vertical switch above each fader.
Each line in the meter for
- RCA connectors for inputs, XLR and Jack 6.35 for outputs
- Equaliser 3-way -16 / +16 very linear curve.
- Possibility to connect an effect plug-ins on a loop send / return with two adjustable knobs on the right under the main to meter
UTILIZATION
- The headphones with this push button just above each fader. When all are Inrush means all channels as a DJM500 example. also you can listen independently for the lines or the master or the effect prepared.
- Each line is assigned to the crossfader. is the small switch next to the button for the headset
- The curve of the cross fader is adjustable!
- For those who, unwanted microphone, surprise, they will be able to use 3 at once and adjust the volume of each, the high and low. There is also a button talkover adjustable volume.
- For the effect is simple, it operates or is operated on opuis not adjust the contrast between send and return.
- There are two buttons on each side of the crossfader. This is basically a quick break on one side or the other of the fader. Convenient for small sound effects achage.
No need for manual
SOUNDS
- The transparency of this table is very very good.
- There is no breath at high volume.
- Equaliser is quite effective in the SPLA-16dB / +16 dB. You can change them to those of its big sister the pmc55-24dB / +6 dB
OVERALL OPINION
We can do anything with this table is pro-free gadgets.
All the fundamentals of a mixing desk and your breaks are well developed with VESTAX mythical quality, both for the manufacture of components for audio and robustness and manageability!
- I have 4 years! and never had to worry
- The most: handling, quality components and noise, possibility of routing a given meter per channel, the look ... etc ...
Cons: a button to bypass the equalizer, which for me is useless, period.
- I tried a lot of tables (DJM Pioneer, Numark, Stanton, ecler) I always come back to say that most are pro vestax. Ecler is not bad but ...
- TOP Quality!. Since they are no longer making this depends on the price and condition that you will find it.
- If I remake this choice? you think ...
- 12 entries commutablent 4 channels that you can assign two outputs on Master 1 and / or Master 2 by two small vertical switch above each fader.
Each line in the meter for
- RCA connectors for inputs, XLR and Jack 6.35 for outputs
- Equaliser 3-way -16 / +16 very linear curve.
- Possibility to connect an effect plug-ins on a loop send / return with two adjustable knobs on the right under the main to meter
UTILIZATION
- The headphones with this push button just above each fader. When all are Inrush means all channels as a DJM500 example. also you can listen independently for the lines or the master or the effect prepared.
- Each line is assigned to the crossfader. is the small switch next to the button for the headset
- The curve of the cross fader is adjustable!
- For those who, unwanted microphone, surprise, they will be able to use 3 at once and adjust the volume of each, the high and low. There is also a button talkover adjustable volume.
- For the effect is simple, it operates or is operated on opuis not adjust the contrast between send and return.
- There are two buttons on each side of the crossfader. This is basically a quick break on one side or the other of the fader. Convenient for small sound effects achage.
No need for manual
SOUNDS
- The transparency of this table is very very good.
- There is no breath at high volume.
- Equaliser is quite effective in the SPLA-16dB / +16 dB. You can change them to those of its big sister the pmc55-24dB / +6 dB
OVERALL OPINION
We can do anything with this table is pro-free gadgets.
All the fundamentals of a mixing desk and your breaks are well developed with VESTAX mythical quality, both for the manufacture of components for audio and robustness and manageability!
- I have 4 years! and never had to worry
- The most: handling, quality components and noise, possibility of routing a given meter per channel, the look ... etc ...
Cons: a button to bypass the equalizer, which for me is useless, period.
- I tried a lot of tables (DJM Pioneer, Numark, Stanton, ecler) I always come back to say that most are pro vestax. Ecler is not bad but ...
- TOP Quality!. Since they are no longer making this depends on the price and condition that you will find it.
- If I remake this choice? you think ...