All user reviews for the Music From Outer Space Sound Lab Mini-Synth

The hardest for RALIS this synth is to sort out components, I used a multimtre to sort of Resistors.

I buy the PCB (printed circuit here musicfromouterspace.com maxim my chance On success.
I suggest you buy them as a price will be much easier and faster! especially with all those son!

frankly with some mthode (there are a lot of welding wire between the card and patience ...), potarect anyone RALIS this little synth kit.
DO NOT DECOURRAGEZ IF YOU NOT SPEAK ENGLISH! CAR ME NO MORE! couraging evidence that ^ ^

for the components I order here is: Elby Designs the advantage of buying the kit is to have buttons knob fawn "moog", they have very wide, so it's best to jou with the rglages.

for the price cont Total: 130 euro + 30 euro component pcb including shipping.

UTILIZATION

It's so full of analog knob.

SOUNDS

Question has its analog sounds good.

to get an ide of the sound produced this thing go Listen to these few exmple:

http://Synthe.modulaire.diy.free.fr/ (http://downsouth.free.fr/)

OVERALL OPINION

I am a little frustrated to have this synth without my dear what the CONTRL, if you make this synth you pick a CV converter. search for "MIDI to CV"
if just for this synth take a converter 2CV. because it has two oscillators.
without the converter produces a synthesis of each osc as if pressing a key continuously, once put under attention.

I invite you check out this forum dedicated to the Synth DIY:

http://sdiyfr.free.fr/forum/viewtopic.php?t=3&start=30&postdays=0&postorder=asc&highlight =

Monophonic analog synth small

2 voltage controlled oscillator control
1 noise
LFO 1
An envelope generator
VCF 1
A sample and hold for version "plus"

Basic connectivity: audio output, 2 inputs for CV control the oscilloscope, and a gate in (envelope generator control)
after we can add an audio input, CV inputs for oscilloscope or VCF
CV output for Lfo etc. ....

the principle is a modular mini prepatch by switches .... not need to play to the switchboard of the 30

UTILIZATION

Config very well thought out and simple if we understand the operation!! few knobs and switches that I built is approx. 30x12cm 5cm in height which is small ..... works with 2 batteries or a power supply 9volts (symmetric) mounted with LF444 entire circuit consumes 6 milliampere
(One LED consumes 50) So even if the batteries are dead the march!!

SOUNDS

Its a very good analog of the former it is not FM synthesis!!
is the analog: the big bass tone, the police siren has the plane crash that
we feel that it is electric and not digital
experimenting you come across sounds incredible but it's not easy to find !!!!!
it has a nice little box sampler .......
is the analog real!!

OVERALL OPINION

It's not an MS 20 is the minisynth !!!!!!!!!
is well thought out simple little cheap and big sound prepatched but it must be made !!!!! I built the version "Soundlab minisynth +" with all options must be methodical because there are more than 60 soldering son .... in all it has cost me the> 70 euros and I make the case 5mm plywood. (wood recup)
labels of all knobs are out of my printer on self-adhesive sheet
the pcb is done I do have a shop next door to me (6th) with the artwork on the page of MFOS

very very good diy project but it must be an inexperienced
to begin a first draft of a guide you disto!!
if you know the differential resistance of diodes and capacitors and solder and if you know that you are patient then go for it!

Ray Wilson has designed this tour, he'll thank you to the site of MFOS because schemas are plenty of filters, LFOs oscillators etc. ....