All user reviews for the Stairville T4S Power-BAR Short

Sorry but I do not use this model of power in STAIRVILLE bar I use version FT4 Stairville Power-BAR is any fawn the same function and the same manufacturer except that it is longer because you can put 8 projectors instead of 4 and no remote control of the system that any fawn must not be of a great interest rt because I think it is better to have a remote control rather than a console.

I think the STAIRVILLE prices for these products are very attractions with and eventually often reproduce the same models as its competitors and that "Casss price" for an operating state as good as another brand (I remain faithful to the brand).

Regarding product that I use for 2 years is impeccable hand that we should not over-tighten the fasteners because I had the opportunity to break 2 since I made the boards and also careful not dpasser by fixing the maximum load as 4 kg but I also have another warning give you a little more complicated to explain but I'll try to be as clear as possible .. .dropoff window

The hen I bought I did not notice but the installed taken above are taken with a wiring system need to observe more nearly! You will understand me explain ...

Take a decision "male" ordinary lcrique extension and lctrique sheet "male" you buy commercially you will see that it is not the same as take a closer look to the connection "earth"!

In the 2 cases on an ordinary socket (220V) that you will return home detail in the same fawn but not this power bar for Record your lctrique extension will return but not the one you have purchased commercially unless careful to take the same model but it seems that has not made this more or there is only one.

Made in the catch of the power bar no rod to perform the connection of the earth but instead two small legs that stand on the top and bottom and slide the top and bottom of the plug of your electrical cord and therefore only on this kind of decision.

In case your projectors are already CBLS taken with the gold of your purchase there will be no problem because the sheet will be the same as that of an extension lctrique but if you add a plug be careful to take the model that still exists or made as I had done is say bought the lctriques doubles but still be careful to make the right! (For me I bought these lctriques doubles at "Mr. DIY" because it is the only store where I found the right model).

So be careful do not made the same rreur than me because I got to 75 doubles electric saw I had 4 bars powers so 16 shots)!

I hope that it was understandable.

Good all purchases!

My opinion commits the same model as the opinion Previous (FT4 power bar)

HELP!
A flight emergency.
I change the thyristors every night. Of 4 bars I have at least 1 or 2 channels that burn out every night. I specific on that I put their two PAR56 or 600W per channel, ie not much. In addition prcdemment as explained, they are not taken and the European Franaise (land on the periphery of the plug). I had thomann first month they send me back the components that roasting, and now j'achte 1 packet of 20 thyristors every 3 months ...
Stairville Bravo.

(Last day of 2008:
Thomman finally deigned to send me the complete PCB for repairing the bars, because the manufacturer has changed the lctronique bar, and it did not see anything ... No more crashes since ... Tt is not too ...)