View other reviews for this product:
dj ju sourisonic
Published on 09/04/07 at 15:06
Personally, I use these speakers fvrier since 2006 and am delighted.
What I like most is the power. Indeed, I possdais up the one pair of speakers that Montana is a basic speaker sound system with 1 to 38 of range and a piezo Roof Mount (which is not as garish that motorola but a little out of his trs trs ... not linear). The EVPX15 have low achievement prs suprieur 2 3 times throughout the spectrum (except, I think in the band 40-60Hz o 2 are equivalent). Then, the sound is, my got, trs good (of course not sound like a RCF or EV (which I flat as the cost) ... but for the price is more than normal) Clarity is, I think, the highlight of this forum.
For children under 26kg ... that's not set up empty, alone (but I will not complain, it's nothing compared to my friend who has LX15 40kg) and, in my ear, arson over around 60Hz low frquence that 45Hz, which is indicated on the sheet but nothing serious because I think the bass properly when tappe same (and I have my tjs Premire speakers who have almost no acute and reinforce the bass below 60Hz).
Level quality price ratio ... I think it's the best on the market (especially when I see a Boost with piezo almost the same price) ... 170 for a real compressor, a filter with all protections, a good solid tape 38 and is all clear, impeccable finish and solid.
Level I tests not cost much, having more and more accessories, I fail to com power, I heard my run and Cole fell in love ... (if macopine read a. .. lol)
I am thinking in buy a pair that I APRS means (by then I complterai 2sub but the I sth trs descending down so I was thinking more sries LX18mb remaining in and my prices are around 35Hz) but it seems more important at this time to change my amp which is still limited (despite the dynamic proper prsence enhanseur a) (I think point me to a QSC RMX 1450).
Here I put 9 because perfection does not exist but I stress that this forum has nothing to do with others of the same price ...
I put today (04/09/2007) says one to say that I have opened to tighten the Speakon & add a cons nut (there is no origin). Indeed APRS 1 year 1 / 2 the only downside I found is that these speakers tend to loosen Speakon (good information for potential buyers but beware I am not soft either with ...). I use this to visit the indoor OCCAZ & a really inspires confidence of the magnet 38 should be approximately 20cm Diameter & belly is to eliminate the calories, then the filter: the circuit should be 10 * 15 cm, the tracks are super large components & standards (same bulb protection Dirat HF is a bulb sets of lights), v g pa Rifi the tweeter because it hidden by a reinforcement of the box but I think it's also srieux. Cable for internal I would say it is either the 1.5 mm2 1mm2 (except of course for the two diodes 0.5) ... finally seeing everything I can see why these speakers do not budge on the QSC amplifier 2 * 280/8ohm that I offered 5 months ago upstream of which there is more work enhanseur which the low frequencies ... everything's going to say it's solid (I also think they are capable of supporting more than 300W RMS since I'm running my QSC for hours on the edge of the clip & have never seen the diode "HF protect" light) ...
What I like most is the power. Indeed, I possdais up the one pair of speakers that Montana is a basic speaker sound system with 1 to 38 of range and a piezo Roof Mount (which is not as garish that motorola but a little out of his trs trs ... not linear). The EVPX15 have low achievement prs suprieur 2 3 times throughout the spectrum (except, I think in the band 40-60Hz o 2 are equivalent). Then, the sound is, my got, trs good (of course not sound like a RCF or EV (which I flat as the cost) ... but for the price is more than normal) Clarity is, I think, the highlight of this forum.
For children under 26kg ... that's not set up empty, alone (but I will not complain, it's nothing compared to my friend who has LX15 40kg) and, in my ear, arson over around 60Hz low frquence that 45Hz, which is indicated on the sheet but nothing serious because I think the bass properly when tappe same (and I have my tjs Premire speakers who have almost no acute and reinforce the bass below 60Hz).
Level quality price ratio ... I think it's the best on the market (especially when I see a Boost with piezo almost the same price) ... 170 for a real compressor, a filter with all protections, a good solid tape 38 and is all clear, impeccable finish and solid.
Level I tests not cost much, having more and more accessories, I fail to com power, I heard my run and Cole fell in love ... (if macopine read a. .. lol)
I am thinking in buy a pair that I APRS means (by then I complterai 2sub but the I sth trs descending down so I was thinking more sries LX18mb remaining in and my prices are around 35Hz) but it seems more important at this time to change my amp which is still limited (despite the dynamic proper prsence enhanseur a) (I think point me to a QSC RMX 1450).
Here I put 9 because perfection does not exist but I stress that this forum has nothing to do with others of the same price ...
I put today (04/09/2007) says one to say that I have opened to tighten the Speakon & add a cons nut (there is no origin). Indeed APRS 1 year 1 / 2 the only downside I found is that these speakers tend to loosen Speakon (good information for potential buyers but beware I am not soft either with ...). I use this to visit the indoor OCCAZ & a really inspires confidence of the magnet 38 should be approximately 20cm Diameter & belly is to eliminate the calories, then the filter: the circuit should be 10 * 15 cm, the tracks are super large components & standards (same bulb protection Dirat HF is a bulb sets of lights), v g pa Rifi the tweeter because it hidden by a reinforcement of the box but I think it's also srieux. Cable for internal I would say it is either the 1.5 mm2 1mm2 (except of course for the two diodes 0.5) ... finally seeing everything I can see why these speakers do not budge on the QSC amplifier 2 * 280/8ohm that I offered 5 months ago upstream of which there is more work enhanseur which the low frequencies ... everything's going to say it's solid (I also think they are capable of supporting more than 300W RMS since I'm running my QSC for hours on the edge of the clip & have never seen the diode "HF protect" light) ...