View other reviews for this product:
foued83
Published on 03/26/07 at 04:03
Attenuator power up to 50W for HP 8 Ohms.
An input and an input HP Power Amp
A potentiometer for adjusting the attenuation (0 to 100%)
The configuration is so we can not simple.Il just have to adjust the rate of attenuation as a function of the tolerance of neighbors. Personally in the practical solution to the maximum (95%) with the volume of the Amli at 4 / 10 (30W all-tube), the volume is comparable to that obtained with a multi-effects connected to a PC with speakers low end ( only the volume of course !!!). Basically, no complaints from neighbors for the time when I use it in an apartment in the city center.
RMQ: My HP is 16 ohms but the seller told me that for small power (30W in this case) that the case be made for HP 8 Ohms did not matter.
I use it on an Orange Rocker 30 in an apartment in the city center (the neighbors across anything !!!).
The grain of the amplifier and the heat lamps are very well preserved but most importantly, I can finally have a saturation worthy of the name (which appears to the quarter of the volume which is in normal use already too high) without me ears to bleed.
however, results in attenuation of high frequencies down which involves changing settings in relation to use in rehearsal '(not too complicated anyway ...). But the sound this does not mean gradient rendering and found particularly surprising.
I use it for a few days and I confess that I am more than satisfied.
The price is reasonable, although its features are quite limited, but somehow it is the cheapest on the market (in any case I have not found better) and then I am parrait be essential to have good lighting in the apartment.
I went to look directly at the shop in Pigalle VHM and I want to say that the reception is particularly good. The store suggested I try it for a week, leaving a security deposit without my request.
An input and an input HP Power Amp
A potentiometer for adjusting the attenuation (0 to 100%)
The configuration is so we can not simple.Il just have to adjust the rate of attenuation as a function of the tolerance of neighbors. Personally in the practical solution to the maximum (95%) with the volume of the Amli at 4 / 10 (30W all-tube), the volume is comparable to that obtained with a multi-effects connected to a PC with speakers low end ( only the volume of course !!!). Basically, no complaints from neighbors for the time when I use it in an apartment in the city center.
RMQ: My HP is 16 ohms but the seller told me that for small power (30W in this case) that the case be made for HP 8 Ohms did not matter.
I use it on an Orange Rocker 30 in an apartment in the city center (the neighbors across anything !!!).
The grain of the amplifier and the heat lamps are very well preserved but most importantly, I can finally have a saturation worthy of the name (which appears to the quarter of the volume which is in normal use already too high) without me ears to bleed.
however, results in attenuation of high frequencies down which involves changing settings in relation to use in rehearsal '(not too complicated anyway ...). But the sound this does not mean gradient rendering and found particularly surprising.
I use it for a few days and I confess that I am more than satisfied.
The price is reasonable, although its features are quite limited, but somehow it is the cheapest on the market (in any case I have not found better) and then I am parrait be essential to have good lighting in the apartment.
I went to look directly at the shop in Pigalle VHM and I want to say that the reception is particularly good. The store suggested I try it for a week, leaving a security deposit without my request.