lodotchnikoff
Published on 04/25/06 at 14:58
Not too many problems to solve this malfunction.
Must be uncoupled from the clutch axis of the engine, with a mild scouring product for the double clutch pulley that is nylon. Reassemble everything, change the belt, remove the tray, and then under the Palteau and clean the shaft of it, always with degreaser. Do not insert anything into the landing where the axis of the plunge in platetau, clean as this one and lubricate with oil or Thorens 10 W 40 new.
Have a look at the following two sites: www.thorens-info.de and wwww.theanalogdept.com.
These are sites dedicated to Thorens.
Good review.
Serge.
Must be uncoupled from the clutch axis of the engine, with a mild scouring product for the double clutch pulley that is nylon. Reassemble everything, change the belt, remove the tray, and then under the Palteau and clean the shaft of it, always with degreaser. Do not insert anything into the landing where the axis of the plunge in platetau, clean as this one and lubricate with oil or Thorens 10 W 40 new.
Have a look at the following two sites: www.thorens-info.de and wwww.theanalogdept.com.
These are sites dedicated to Thorens.
Good review.
Serge.