20-768 Microphone Adapter classified ad
New ad alertReviews
4.0/5(1 reviews)
100 %
Write a user review
Rj_4000
Published on 03/27/10 at 02:22 (This content has been automatically translated from French)
This is an adapter for electret microphones equipped with a 3 pin LEMO plug (compatible with Sennheiser wireless transmitter) to XLR-Phantom.
Besides adjusting the connector, so it can feed the microphone from 9V to 48V Phantom power supply of a standard.
(If there was just an adaptation, we probably would explode the microphone!
I bought it because it is the cheapest solution for connecting microphones DPA 4060-F03, equipped with LEMO on a classic table ... without changing the connector (which I find more solid and practical than the MicroDot CCA).
OVERALL OPINION
I use it recently. I then ordered 2, one of them being defective, I requested an exchange and ordered one more.
...…
Besides adjusting the connector, so it can feed the microphone from 9V to 48V Phantom power supply of a standard.
(If there was just an adaptation, we probably would explode the microphone!
I bought it because it is the cheapest solution for connecting microphones DPA 4060-F03, equipped with LEMO on a classic table ... without changing the connector (which I find more solid and practical than the MicroDot CCA).
OVERALL OPINION
I use it recently. I then ordered 2, one of them being defective, I requested an exchange and ordered one more.
...…
Read more
This is an adapter for electret microphones equipped with a 3 pin LEMO plug (compatible with Sennheiser wireless transmitter) to XLR-Phantom.
Besides adjusting the connector, so it can feed the microphone from 9V to 48V Phantom power supply of a standard.
(If there was just an adaptation, we probably would explode the microphone!
I bought it because it is the cheapest solution for connecting microphones DPA 4060-F03, equipped with LEMO on a classic table ... without changing the connector (which I find more solid and practical than the MicroDot CCA).
OVERALL OPINION
I use it recently. I then ordered 2, one of them being defective, I requested an exchange and ordered one more.
So I had 4 on hand.
I have not tried anything else. I know that the Sennheiser MZA 900-P4 does the same thing-and more-but it costs more than 3 times more expensive.
The finish is very good, all-metal, you seem solid.
When it works, the sound is very good ...
but now when it works.
Of the 4, I had ... One who walked out of the box, which gave a first more noise than signal (I then asked for a trade) ... until I found the "trick": the XLR has a bad contact, just a little twist to the signals coming ... and rest.
And the other 2 simply does not walk at all: on one, not the connector on the other no sound. Nothing to do.
1 in 4 is not terrible.
That said, the support is very good, kind people and the replacement (unfortunately failed)-as did the initial order, arrived quickly (2 days).
In summary: good product when it works, quality control nonexistent-so get ready to essais/erreurs- but excellent service, which compensates a bit.
Ultimately, it's not a bad solution ... when one is warned and given the price difference.
A remake, yes, I do it again. Hence the rating.
Now I hope that it will take: the worst would be to find themselves stranded in the middle of a catch.
Therefore provide a "spare" in the cost.
But nevertheless, economically, it holds the road (remember the price of the adapters CCA).
Go one last point: I have a doubt about the RF isolation. We will see that with a multi-Environmental 50m Live ...
To be continued.
Update 8 / 2010:
I confirm that the support Canford is good, efficient and fast.
They replaced the engines failed me without blinking and substitutes ("new batch of production" - apparently those were the last I received a lot earlier) are Nikel.
No sound problem at all in all environments tested (but until then, never Y'avait RF Micro ...).
I am in total, very happy to have found these devices.
It makes me mics DPAs really cheap!
Besides adjusting the connector, so it can feed the microphone from 9V to 48V Phantom power supply of a standard.
(If there was just an adaptation, we probably would explode the microphone!
I bought it because it is the cheapest solution for connecting microphones DPA 4060-F03, equipped with LEMO on a classic table ... without changing the connector (which I find more solid and practical than the MicroDot CCA).
OVERALL OPINION
I use it recently. I then ordered 2, one of them being defective, I requested an exchange and ordered one more.
So I had 4 on hand.
I have not tried anything else. I know that the Sennheiser MZA 900-P4 does the same thing-and more-but it costs more than 3 times more expensive.
The finish is very good, all-metal, you seem solid.
When it works, the sound is very good ...
but now when it works.
Of the 4, I had ... One who walked out of the box, which gave a first more noise than signal (I then asked for a trade) ... until I found the "trick": the XLR has a bad contact, just a little twist to the signals coming ... and rest.
And the other 2 simply does not walk at all: on one, not the connector on the other no sound. Nothing to do.
1 in 4 is not terrible.
That said, the support is very good, kind people and the replacement (unfortunately failed)-as did the initial order, arrived quickly (2 days).
In summary: good product when it works, quality control nonexistent-so get ready to essais/erreurs- but excellent service, which compensates a bit.
Ultimately, it's not a bad solution ... when one is warned and given the price difference.
A remake, yes, I do it again. Hence the rating.
Now I hope that it will take: the worst would be to find themselves stranded in the middle of a catch.
Therefore provide a "spare" in the cost.
But nevertheless, economically, it holds the road (remember the price of the adapters CCA).
Go one last point: I have a doubt about the RF isolation. We will see that with a multi-Environmental 50m Live ...
To be continued.
Update 8 / 2010:
I confirm that the support Canford is good, efficient and fast.
They replaced the engines failed me without blinking and substitutes ("new batch of production" - apparently those were the last I received a lot earlier) are Nikel.
No sound problem at all in all environments tested (but until then, never Y'avait RF Micro ...).
I am in total, very happy to have found these devices.
It makes me mics DPAs really cheap!
See less
00
»
Tech. sheet
- Manufacturer: Canford Audio
- Model: 20-768 Microphone Adapter
- Category: Other Accessories For Microphones
- Added in our database on: 03/27/2010
We have no technical specifications for this product
but your help will be much welcomed
»
Other categories in Accessories for Microphones
Other names: 20 768 microphone adapter, 20 768 microphoneadapter, 20768microphoneadapter, 20768 microphoneadapter, 20 768microphone adapter, 20 768microphoneadapter