View other reviews for this product:
Gumpa Maker
Published on 05/23/10 at 15:56
DIY clone TB-303
analog monophonic, as TB-303
Schematic of the origin is taken and adapted some components rcent.
it is possible to replace the old with new components (which I did), even if some ncessitent some gymnastics!
squenceur not internal, but very much a MIDI interface tudie.
UTILIZATION
as simple as TB and even more! lively lunchtime!
manual assembly and use is very well Retailer
and technical support forum ddi the TM3030 is followed very well and even if we ask newbie question of electronics, it is always clear and properly REU
SOUNDS
for sounds, I am unable to differancier the original!
both waveforms, the filter and the VCA, the accents and the slides are very well reproduced! brilliant!
the sound is excelling (if that's the sound of a TB-303 which is sought)!
Wholesale output level.
OVERALL OPINION
good, I finished 2 weeks ago.
I had the opportunity to try a TB-303 shortly before, and frankly, I do not see the advantage of owning the original (except for the most passionate and wealth of us)!
cluck cost between 200 and 250 euros! frankly, should not GNER!
yes I would do the experiment! and frankly, I think I'll do it again!
PS: there is a demo on ACIDVOICE.COM and we need not to pay attention: this demo, the accented notes do not see their decay is set to a minimum while mine does! they have to make an assembly error, or have not taken the recommended component!
THIS MACHINE IS PERFECT AS THAT SOUNDS OF USE (for me is a plus MIDI) NOT FORGET THE COST !!!!!
I highly recommend ALL THOSE WHO CRY IN LIGHT OF THE COAST OF TB-303!
GO EYES CLOSED!!
PS: it was my first electronic project (apart from waiting tlphonique being techno 4th) and I frankly galR not the only thing I did learn is doing good weld (and not take me very long to get there!). A hand has it's "coloring"! The position of each component so that its polarity is indicated on the plate! EASY!
analog monophonic, as TB-303
Schematic of the origin is taken and adapted some components rcent.
it is possible to replace the old with new components (which I did), even if some ncessitent some gymnastics!
squenceur not internal, but very much a MIDI interface tudie.
UTILIZATION
as simple as TB and even more! lively lunchtime!
manual assembly and use is very well Retailer
and technical support forum ddi the TM3030 is followed very well and even if we ask newbie question of electronics, it is always clear and properly REU
SOUNDS
for sounds, I am unable to differancier the original!
both waveforms, the filter and the VCA, the accents and the slides are very well reproduced! brilliant!
the sound is excelling (if that's the sound of a TB-303 which is sought)!
Wholesale output level.
OVERALL OPINION
good, I finished 2 weeks ago.
I had the opportunity to try a TB-303 shortly before, and frankly, I do not see the advantage of owning the original (except for the most passionate and wealth of us)!
cluck cost between 200 and 250 euros! frankly, should not GNER!
yes I would do the experiment! and frankly, I think I'll do it again!
PS: there is a demo on ACIDVOICE.COM and we need not to pay attention: this demo, the accented notes do not see their decay is set to a minimum while mine does! they have to make an assembly error, or have not taken the recommended component!
THIS MACHINE IS PERFECT AS THAT SOUNDS OF USE (for me is a plus MIDI) NOT FORGET THE COST !!!!!
I highly recommend ALL THOSE WHO CRY IN LIGHT OF THE COAST OF TB-303!
GO EYES CLOSED!!
PS: it was my first electronic project (apart from waiting tlphonique being techno 4th) and I frankly galR not the only thing I did learn is doing good weld (and not take me very long to get there!). A hand has it's "coloring"! The position of each component so that its polarity is indicated on the plate! EASY!