Eurolite Led Pixel Mesh 64x64

I use 22 LED Pixel Mesh Eurolite slabs since October 2011.

This is the first step has led I install but I have seen many other operating.

Clearly, this is the low end neither more nor less. Dja mounting two DIFFERENT kits used to fix the tiles together, with many elements perdables therefore not practical, unlike most LED screen that possdent fasteners 1/4 turn, and, among the two kits (with U pins and simple nuts / filetes stems), there has Adi nullity: the holes to get the stems are thicker than the bolts, Basically, we can fix anything in this way ...

After the installation, connection. Again, the Chinese have not fouls, it is "to the hard", there must be the RJ45 cable everywhere, seen from behind, it's really not at all aesthetic. Or the need to redo all the RJ45 connectors must be reversed because of the short cables galley.

In the operation, well it's rude, the pitch is big but it was his Adi know. The delivered interface software (if we take with) is quite undrinkable, drivers are not good ... the brightness is good, only good point.

In terms of manufacturing quality, is really distressing. For 6 months, a good twenty welds have had to be redone, power supply has Crame, two transistors are led grant HS, also after multiple false contacts at the connectors linking diffrentes LED bars and, as the assembly is in a column, if a simple ranks fair is all those who are at the top that dconnent ...

Buy as much a notch and a video projector that dung, you may have more service fees and regret your purchase. Rating: 0

I use 22 slabs Eurolite LED Pixel Mesh since October 2011.

This is the first screen has LED I installed, but I have seen many others in operation.

Clearly, this is the low end more or less. Already mounting, two different kits allow you to set the tiles together, with lots of perdables not practical, unlike most LED screen that have fasteners 1/4 turn, and, among the two sets (of U with simple pins and nuts / studs), there is already a nullity: the holes to get the stems are larger than the bolts, basically, nothing can fix this way ...

After the installation, connection. Again, the Chinese have not crushed, it "has the hard", we must put the RJ45 cable everywhere, and seen from behind, it's really not at all aesthetic. Or the need to redo all the RJ45 connectors must be reversed because of the short cables galley.

Level of functioning, well it is rude, the pitch is big but its we were already aware. Supplied software interface (if you take it with) is quite undrinkable, the drivers are not good ... Brightness is good, only good point.

In terms of build quality, it's really sad. For six months, two dozen of the welds have to be redone, has a power cramée, two transistors are HS led the manager, has also count multiple contacts at the level of false connections linking the various LED bars, and as the assembly is column, if a single row fair is all those who find themselves above déconnent ...

Buy as many a screen and a video projector that dung, you may have more costs and customer service to regret your purchase. Rating: 0