CC Pro S classified ad
New ad alertImages
Reviews
4.3/5(4 reviews)
50 %
25 %
25 %
Write a user review
JimboSpinsThe Pro S is one of the best I own
Published on 02/21/13 at 20:18The Pro S from Ortofon has a rubber bearing that can handle all of the scratching and back cuing easily. This company is a great company when it comes to making needles and cartridges, I have been using them for years for some of my best gear that I have. I have used this set of needles for over 5 years from the and there is nothing that I didn’t like about it. The output voltage is at 1000Hz, 5 mV and the stylus type is spherical. The frequency range is at -3 dB 20 to 20,000 Hz.
Installing this needle / cartridge is easy if you know how to do it or if you want to read the manual that comes with it, it will explain everything also Ortofon has some of the best customer service I have...…
Installing this needle / cartridge is easy if you know how to do it or if you want to read the manual that comes with it, it will explain everything also Ortofon has some of the best customer service I have...…
Read more
The Pro S from Ortofon has a rubber bearing that can handle all of the scratching and back cuing easily. This company is a great company when it comes to making needles and cartridges, I have been using them for years for some of my best gear that I have. I have used this set of needles for over 5 years from the and there is nothing that I didn’t like about it. The output voltage is at 1000Hz, 5 mV and the stylus type is spherical. The frequency range is at -3 dB 20 to 20,000 Hz.
Installing this needle / cartridge is easy if you know how to do it or if you want to read the manual that comes with it, it will explain everything also Ortofon has some of the best customer service I have ever experienced and they have been really helpful. When I purchased it , it came with a case, a brush and a few extra tips as well. The price was also very affordable when I purchased directly from Ortofon.
I can easily see the needle on the pro S that has really helped me when doing clubs with low lighting. I can now have my needle drops exactly where I want them. I have been using this needle for a while now and many others around the same time. I can say that the Pro S from Ortofon is by far one of the best ones that I have ever purchased and used in the last 10 years.
Even the replacement stylus for the Pro S is not that expensive and can be purchased from just about any music gear store as they all pretty much carry the Ortofon Concorde now. I am very pleased with this company and needle/cartridge; I will purchase from them a lot more in the future.
Installing this needle / cartridge is easy if you know how to do it or if you want to read the manual that comes with it, it will explain everything also Ortofon has some of the best customer service I have ever experienced and they have been really helpful. When I purchased it , it came with a case, a brush and a few extra tips as well. The price was also very affordable when I purchased directly from Ortofon.
I can easily see the needle on the pro S that has really helped me when doing clubs with low lighting. I can now have my needle drops exactly where I want them. I have been using this needle for a while now and many others around the same time. I can say that the Pro S from Ortofon is by far one of the best ones that I have ever purchased and used in the last 10 years.
Even the replacement stylus for the Pro S is not that expensive and can be purchased from just about any music gear store as they all pretty much carry the Ortofon Concorde now. I am very pleased with this company and needle/cartridge; I will purchase from them a lot more in the future.
See less
00
»
nicky.carsonPublished on 01/19/05 at 13:27 (This content has been automatically translated from French)
Cell with a nice balance which is just the trademark of Concordes. Its neutral lgrement below the top medium and high frequencies.
00
»
Dj KillPublished on 12/28/05 at 09:39 (This content has been automatically translated from French)
I had a few months before acqurir a Shure M44-7. I mean is, because if we do not put much weight she jumps. Price is not rev high and I advise all the beginners ...
00
»
arnaud35000Published on 11/04/06 at 05:51 (This content has been automatically translated from French)
Bought a few months ago not replace a Numark Groove Tool (!!!), then mounted on a Numark TT 1610.
In simple cost, no problem, even big power, it goes well, do not grsille too, follows the path it right!
In scratch, dj I am not a "Arrows" in the Contents, then the Numark 1610 is not a "Arrows" ... say to type 3-4 scratches on the beat and move to the next song is great! It is super stable and quite heavy, so putting a little more weight that's enough!
But if you're a fan of beat-juggling intensive and other pass-pass, cut, and whatever others do not take the 1610 TT ... The models are taking over!
For the purchase of a vynil deck is based on the use we want to do, so for me I am...…
In simple cost, no problem, even big power, it goes well, do not grsille too, follows the path it right!
In scratch, dj I am not a "Arrows" in the Contents, then the Numark 1610 is not a "Arrows" ... say to type 3-4 scratches on the beat and move to the next song is great! It is super stable and quite heavy, so putting a little more weight that's enough!
But if you're a fan of beat-juggling intensive and other pass-pass, cut, and whatever others do not take the 1610 TT ... The models are taking over!
For the purchase of a vynil deck is based on the use we want to do, so for me I am...…
Read more
Bought a few months ago not replace a Numark Groove Tool (!!!), then mounted on a Numark TT 1610.
In simple cost, no problem, even big power, it goes well, do not grsille too, follows the path it right!
In scratch, dj I am not a "Arrows" in the Contents, then the Numark 1610 is not a "Arrows" ... say to type 3-4 scratches on the beat and move to the next song is great! It is super stable and quite heavy, so putting a little more weight that's enough!
But if you're a fan of beat-juggling intensive and other pass-pass, cut, and whatever others do not take the 1610 TT ... The models are taking over!
For the purchase of a vynil deck is based on the use we want to do, so for me I am happy trs!
In simple cost, no problem, even big power, it goes well, do not grsille too, follows the path it right!
In scratch, dj I am not a "Arrows" in the Contents, then the Numark 1610 is not a "Arrows" ... say to type 3-4 scratches on the beat and move to the next song is great! It is super stable and quite heavy, so putting a little more weight that's enough!
But if you're a fan of beat-juggling intensive and other pass-pass, cut, and whatever others do not take the 1610 TT ... The models are taking over!
For the purchase of a vynil deck is based on the use we want to do, so for me I am happy trs!
See less
00
»
Tech. sheet
- Manufacturer: Ortofon
- Model: CC Pro S
- Category: Phono Cartridges
- Added in our database on: 05/05/2004
We have no technical specifications for this product
but your help will be much welcomed
»
Other categories in Accessories for DJing
Other names: cc pro s, ccpros, cc pros