View other reviews for this product:
Seaman
Published on 01/24/06 at 10:37
Feature of the M44-7 cell
Cell-to turntables (requires a cell door)
-Output level: 9.5mV
-Frequency response: 20-20000Hz
Support-Force: 1-3 grams
Support-Force recommended: 3g
For the rest, here are the directions (in English) from the folder:
Optimum load-Ohms at 47 K: 400-500pF
-Inductance: 720mH
-Channel separation: 20dB at 1KHz
Special features of N44-7 Stylus (comes with the cell)
-Output level at 1kHz, 5cm/sec: 9.5mV
-Frequency response: 20-17000Hz
Support-Force: 1.5g to 3g
Diamond-Type: Spherical
-Crosstalk (Channel Separation): see above
Short story:
After years of struggling with Ortofon and Stanton of all kinds, here are my Technics SL-equipped cell 1200MkII Shure M 44-7 .... surprise and miracle! It is a wonder that cell!
After a good setting it adheres to all that passes below: vinyl, pancakes, rugs ... and it does not take off with hair!
Seriously, she's great. Whether or scratch mix it up to par, it remains anchored in the groove as if it was born. Whether 1.5 or 3g, set at 23 ° right or it's the same, it does not budge.
Other advantages of the Corny: high output, good return of frequencies (with a + for the bass).
Supplied with a small weight, 2 sets of mounting screws (2 different lengths depending on whether one places the small weight or not), 4 color cable connection to the cell door, a small brush to clean the needle, a small screwdriver, a folder that clearly describes the different types of facilities and regulation of the cell, an N44-7 stylus ...
Shure does not disabused the purchaser of this product, everything described in the pubs or the manual are represented by that cell.
No need to introduce myself another product supposedly better or equivalent to lower prices: I keep and buy Shure M 44-7! na!
Cell-to turntables (requires a cell door)
-Output level: 9.5mV
-Frequency response: 20-20000Hz
Support-Force: 1-3 grams
Support-Force recommended: 3g
For the rest, here are the directions (in English) from the folder:
Optimum load-Ohms at 47 K: 400-500pF
-Inductance: 720mH
-Channel separation: 20dB at 1KHz
Special features of N44-7 Stylus (comes with the cell)
-Output level at 1kHz, 5cm/sec: 9.5mV
-Frequency response: 20-17000Hz
Support-Force: 1.5g to 3g
Diamond-Type: Spherical
-Crosstalk (Channel Separation): see above
Short story:
After years of struggling with Ortofon and Stanton of all kinds, here are my Technics SL-equipped cell 1200MkII Shure M 44-7 .... surprise and miracle! It is a wonder that cell!
After a good setting it adheres to all that passes below: vinyl, pancakes, rugs ... and it does not take off with hair!
Seriously, she's great. Whether or scratch mix it up to par, it remains anchored in the groove as if it was born. Whether 1.5 or 3g, set at 23 ° right or it's the same, it does not budge.
Other advantages of the Corny: high output, good return of frequencies (with a + for the bass).
Supplied with a small weight, 2 sets of mounting screws (2 different lengths depending on whether one places the small weight or not), 4 color cable connection to the cell door, a small brush to clean the needle, a small screwdriver, a folder that clearly describes the different types of facilities and regulation of the cell, an N44-7 stylus ...
Shure does not disabused the purchaser of this product, everything described in the pubs or the manual are represented by that cell.
No need to introduce myself another product supposedly better or equivalent to lower prices: I keep and buy Shure M 44-7! na!