SCN-950 classified ad
New ad alertImages
Reviews
4.1/5(9 reviews)
33 %
44 %
11 %
Write a user review
jt32very good scan
Published on 07/01/13 at 06:00 (This content has been automatically translated from French)I have a 6 year since the first three series and three new
Purchased and used with the meter to date 1400 hours this material begins to
RAS no major worries.
A check: the power of the DMX card that can have a bad contact pin. In this case the display will turn off scan the scan does not respond but the light stays on with the shutter closed: a monitor
steering with dmx sunlite carefree flush fluid movement
Purchased and used with the meter to date 1400 hours this material begins to
RAS no major worries.
A check: the power of the DMX card that can have a bad contact pin. In this case the display will turn off scan the scan does not respond but the light stays on with the shutter closed: a monitor
steering with dmx sunlite carefree flush fluid movement
00
»
Dj jéjéHo hum
Published on 03/07/12 at 11:08 (This content has been automatically translated from French)I use 4 since mid 2010, Cygnus machines having already toured 200h before.
I obviously already used lots of scanners, in that range or more.
My opinion is mixed, there is the idea but always a catch.
Color: not too bad, but some colors are too dark or too translucent, like a yellow or red, green, blah blah.
Gobo: even notice that the colors, gobos kit not too bad but could have done better.
Dimmer Shutter: The shutter for blackout and strobe the dimmer is effective but is has no ch ** r, it dimme anything, it cuts the beam in a fully visible in projection.
Movements: fast enough but lack of precision in the movements slow enough, we see a small blows ... Otherwise the...…
I obviously already used lots of scanners, in that range or more.
My opinion is mixed, there is the idea but always a catch.
Color: not too bad, but some colors are too dark or too translucent, like a yellow or red, green, blah blah.
Gobo: even notice that the colors, gobos kit not too bad but could have done better.
Dimmer Shutter: The shutter for blackout and strobe the dimmer is effective but is has no ch ** r, it dimme anything, it cuts the beam in a fully visible in projection.
Movements: fast enough but lack of precision in the movements slow enough, we see a small blows ... Otherwise the...…
Read more
I use 4 since mid 2010, Cygnus machines having already toured 200h before.
I obviously already used lots of scanners, in that range or more.
My opinion is mixed, there is the idea but always a catch.
Color: not too bad, but some colors are too dark or too translucent, like a yellow or red, green, blah blah.
Gobo: even notice that the colors, gobos kit not too bad but could have done better.
Dimmer Shutter: The shutter for blackout and strobe the dimmer is effective but is has no ch ** r, it dimme anything, it cuts the beam in a fully visible in projection.
Movements: fast enough but lack of precision in the movements slow enough, we see a small blows ... Otherwise the placement of the mirror is ingenious, placed relatively low to that high position, while the beam is well thought out and there is no loss.
Reliability: it is fairly reliable, some bad contacts on the lamp circuit, is case sensitive if regular handling.
The value for money is so so, it's expensive for what is being proposed, no focus servo, no prism, a dimmer pourrave ... Better to look to the Clubscan Electroconcept MK2.
If I had to make a choice, would not that be the ...
I obviously already used lots of scanners, in that range or more.
My opinion is mixed, there is the idea but always a catch.
Color: not too bad, but some colors are too dark or too translucent, like a yellow or red, green, blah blah.
Gobo: even notice that the colors, gobos kit not too bad but could have done better.
Dimmer Shutter: The shutter for blackout and strobe the dimmer is effective but is has no ch ** r, it dimme anything, it cuts the beam in a fully visible in projection.
Movements: fast enough but lack of precision in the movements slow enough, we see a small blows ... Otherwise the placement of the mirror is ingenious, placed relatively low to that high position, while the beam is well thought out and there is no loss.
Reliability: it is fairly reliable, some bad contacts on the lamp circuit, is case sensitive if regular handling.
The value for money is so so, it's expensive for what is being proposed, no focus servo, no prism, a dimmer pourrave ... Better to look to the Clubscan Electroconcept MK2.
If I had to make a choice, would not that be the ...
See less
50
»
musicR1Published on 10/08/11 at 01:18 (This content has been automatically translated from French)
I served for over 3 years and I own for 1 year great product very bright gobobo just missing the rotating prism
I advice her not worth the high end but its works well and is faster than the lyre and cheaper
I advice her not worth the high end but its works well and is faster than the lyre and cheaper
21
»
dj mak'sHORRIBLE
Published on 10/02/11 at 19:56 (This content has been automatically translated from French)I have 1 month and I am more than disappointed. I had the contest scn835 150hid they are less expensive but much better, the colors are more beautiful with a discharge lamp and the beam excellent, nothing to do with scn950 I am disgusted with this scanner. I recommend a person for the price all add a little and take the lyre LED 60w vs tighten really not disappointed.
12
»
Tech. sheet
- Manufacturer: Contest
- Model: SCN-950
- Category: Moving mirrors
- Added in our database on: 01/14/2007
We have no technical specifications for this product
but your help will be much welcomed
»
Manuals and other files
Other categories in Automated fixtures
Other names: scn 950, scn950