View other reviews for this product:
Oliviercool
Published on 06/16/06 at 10:59
Analogue DJ mixer rack not:
<ul>
3 pairs of 2 with prampli phono / line and 1 with prampli mic / line
RCA connectors exclusively except for the headphone and microphone input jack (6.3 mm) + 1 single ground terminal for turntables
For inputs with phono pramplis, rglages possible: Selector phono or CD, gain, treble, mids, bass, PFL activation, activation of the Isolator for acute mdiums and low cut , punch, volume fader and crossfader
For the pair of them with micro prampli, rglages possible: Selector mic / line, gain, treble, bass, PFL activation and rotary volume knob
2 outputs with spares rglage output volume
VU meters sensitive until -20 dB
Small Dimensions: approx. 14 cm wide, 36 cm deep and 8.5 cm
))
</ul>
UTILIZATION
This is my Premire DJ mixer, I use it primarily to make DJ mixes between my Yamaha DX200 and my Yamaha AN200, the expanders mainly techno - trance.
Easy to use and effective, it is unfortunate that the crossfader does not lower the sound ds you start dragging from one another when extrmit gives way to the sound of the other pair of channels. In fact, its decline only after the middle of the cross-fader crossed, causing a "bump" sound not enjoyable entandre trs. especially during slow passage of a pair the other channels. But hey, a DJ mixing desk so small is relatively hard to find. Imagine it is the depth and height of the turntable ^ ^ Too bad that its output is not XLR (but with little room for the small fact that we can not do otherwise gure) ... Too bad also that there is no dpart or effects return, it would t particulirement useful, especially for the microphone ...
SOUNDS
Trs sound correct ^ ^
OVERALL OPINION
A DJ mixing desk so small, it is difficult to ask more. Except for crpss-fader, all the rest, it is only good ^ ^
Its assets:
<ul>
Small))))
Buttons and CUT PUNCH
Faders up remarkably well throughout but (like most of the other buttons for that matter)
</ul>
Its default:
<ul>
The cross-fader: Too bad middle of the cross is that the sound stops rising and begins a ct down the other.
No dpart + effects returns, damages, especially for the pair of accueuillant between the micro :-(
That's all ^ ^
</ul>
<ul>
3 pairs of 2 with prampli phono / line and 1 with prampli mic / line
RCA connectors exclusively except for the headphone and microphone input jack (6.3 mm) + 1 single ground terminal for turntables
For inputs with phono pramplis, rglages possible: Selector phono or CD, gain, treble, mids, bass, PFL activation, activation of the Isolator for acute mdiums and low cut , punch, volume fader and crossfader
For the pair of them with micro prampli, rglages possible: Selector mic / line, gain, treble, bass, PFL activation and rotary volume knob
2 outputs with spares rglage output volume
VU meters sensitive until -20 dB
Small Dimensions: approx. 14 cm wide, 36 cm deep and 8.5 cm
)) </ul>
UTILIZATION
This is my Premire DJ mixer, I use it primarily to make DJ mixes between my Yamaha DX200 and my Yamaha AN200, the expanders mainly techno - trance.
Easy to use and effective, it is unfortunate that the crossfader does not lower the sound ds you start dragging from one another when extrmit gives way to the sound of the other pair of channels. In fact, its decline only after the middle of the cross-fader crossed, causing a "bump" sound not enjoyable entandre trs. especially during slow passage of a pair the other channels. But hey, a DJ mixing desk so small is relatively hard to find. Imagine it is the depth and height of the turntable ^ ^ Too bad that its output is not XLR (but with little room for the small fact that we can not do otherwise gure) ... Too bad also that there is no dpart or effects return, it would t particulirement useful, especially for the microphone ...
SOUNDS
Trs sound correct ^ ^
OVERALL OPINION
A DJ mixing desk so small, it is difficult to ask more. Except for crpss-fader, all the rest, it is only good ^ ^
Its assets:
<ul>
Small
)))) Buttons and CUT PUNCH
Faders up remarkably well throughout but (like most of the other buttons for that matter)
</ul>
Its default:
<ul>
The cross-fader: Too bad middle of the cross is that the sound stops rising and begins a ct down the other.
No dpart + effects returns, damages, especially for the pair of accueuillant between the micro :-(
That's all ^ ^
</ul>