All user reviews for the Numark DM3002X

is all it takes for the "basic"

UTILIZATION

is all it takes for the "basic"

SOUNDS

perfect!

OVERALL OPINION

Hi all,
I'm not much used this table (+ /-200h) that I bought in the 60 occaz 70euros.
But the little I've used ... it blew me away!
I threw two HK coupled with a crown above therefore very good gear compared to the table to see how it makes!
10 hours of its non-stop in the woods with 600w rms or could easily believe that there 4kilos sound output.
Well it's on the table is not everything but no sizzle, no breath, no ... In addition there are a lot of things but the two above HS remaining channels nothing to say!

The Numark DM-3002X is a DJ mix of very good quality ergonomic and efficient. more oriented towards a broad use (techno hihop) that is strictly dedicated to a style.

Carracteristiques:
- 3 tracks phono / line + microphone input.
- 3-band EQ on each track (including micro) + Gain Control
- 2 groups of selector "kill" that permetent to cut frequencies (low / mid / high).
- Flexible and precise cross fader can be assigned to any edge. It works in two ways either in "hip hop" = slow transition. is in "techno" = rapid transition. Furthermore, it is reversible
- Systm of the costs in the headphone is a complicated qd can we want to hear the overall mix but has the advantage of mixing with headphones without having to listen through the speakers! (Convenient for those who mix in the apartment).
- Balancing the knob headphone L / R between the two tracks selectionnbr /> - control of gain general assignagle L / R
- Baragraph band on each slice + a general
- LED display beat a score of cross-fader.
- Insert effect
- Rack-mountable in 10 "
- Possibility to remotely control a CD player numark thanks to the "fader start"
- Connection complete with RCA / cinch

UTILIZATION

-

SOUNDS

-

OVERALL OPINION

Basically it's a table that presents well, plays easily, and presents in addition the possibility to access many features often reserved for very high-end consoles. as of 3 bandeux bargraphs separated, or the balance control L / R of the tracks assigned ds Listen headphone.

but hey what really is the most jouabilit and ergonomics that DM3002X gadgets and doing very well face has its big sisters (vestax PMC / PMC and A & H Xone).

Mixer 3-way, 3 phono, 3 mic + 1 line. Bargraphs by independent tracks.

UTILIZATION

The grip is very fast, all functions are easily accessible, no config needed.

SOUNDS

Good sound for the price of the table of course. The cuts are correct frequency without being exceptional.

OVERALL OPINION

This is a very correct table for the price that is requested. Numark has incorporated all the features you would expect from a product of this level (entry / mid-range) and even a little more. We greatly appreciate the meters independent track, and the ability to adjust the cutoff frequency of the crossfader or even disable it completely. A good idea too, double headphone jack, jack / mini-jack, handy when one has lost its power adapter or you want connect two headsets simultaneously (eg for learning).
Buttons to activate the "kill" as well as taking to plug a small lamp are probably gadgets but after all, we will not complain if we have more for the same price ...

Only small downside, the quality of components. After about 6-7 months of use, two faders sizzle and must be changed ... but I suppose at that price you can not expect more ...

Possibility to connect a box effect.

UTILIZATION

So easy to use.
You can directly use your hand to light the fireplace.

SOUNDS

The sound is good and the good qualisation.

OVERALL OPINION

I just wanted to make small precision on this table that I bought used.
Personally, I find that enjoyable potentiomtres are trs (flexible prcis, it does not feel like on some tables to manipulate the plastic crap.)
Similarly, the acute medium pots Bass are well placed, not too tight ... just may be a BMOL for those with big fingers as the buttons are quite thin.

I tried other models such as Matrix 3, numark DMX ... but the DM3002 I prfre.
In résumé if you find one in good state of OCCAZ, Do not hesitate, she just a big.

-

UTILIZATION

-

SOUNDS

-

OVERALL OPINION

Hello everyone. Here it has been two years since I use the DM-3002X and it's a disaster. 6 times the crossfader a change of blowing out, the killer who sizzles ect ...
It is good to know that I mix in the house 8 hours a week on it so what it would be with the hip-hop ...!!!
I'm really disappointed in that table but also the image of Numark, the trend today is to promote the amount of sales rather than product quality.
In addition, due to a € 26 and all the crossfader entirely my responsibility, I clash with my dealer but with numark when I just wanted a commercial gesture is made.
This is what I had to say on this table
She is beautiful, it flashes, it is tough but really is shit.

Well

UTILIZATION

Fairly simple to use

SOUNDS

Well

OVERALL OPINION

- How long have you use it?
3 years

- What is so special that you like most and least?
Pros: Design, LEDs, knobs of the function reverse the crossfader

Cons: Kills the not so good

- Have you tried many other models before buying it?
yes a Beringuer and Stanton

- How would you rate the quality / price?
I got into an opportunity then to what cost € 150 250 at the time so for me no pb on this point

- With experience, you do again this choice? ...
yes

Not to be redundant with the previous ones opinion, I put only what is less "standard":

- Exit REC
- Dpart effects
- Connectors "Fader-Start" in micro-jack
- X-Fader assignment, Reverse Slope ...
- BNC lamp socket (see reviews below)

UTILIZATION

Using fairly simple if adjacent assimil the overall operation of a console.

Button DGIG well as "affinity" trs enjoyable touch. Faders flexible, double position for cuts (fugitive or blocked.

VU nitre indpendant by Section effective headphone (Cue mix / Prg, Blend / Split).

Tip: By leaving the dpart \ effects return "short circuitquot; can be prparer filters on a path UNUSED and" swing "filtering a helping select fader the two voices for dpart effect ...

SOUNDS

The filters are quite effective, and cut hard enough.

The switch cut MRIT have to exist ... but the curve is cut diffrent correctors, and finally I do not use quasimment (House \ Tek)

The breath is present, but the music does not get a record too (dynamic compresses to stop any fawn).

Please note, faders grsillent fairly quickly, especially if the console is not being protected when not in use.
Solution: buy a bomb "sliding contact" (no single contacts), and pulvriser once every 1 \ 2 months or before an evening => Here we go again like in 40! (4 years, I have it, use 4 \ 5 hours per week)

OVERALL OPINION

A good console without prtention, but with enough features and enough tricks to be versatile.

To mix the House, or another time R'N'B with a scratch or a ch'ti pass'pass has done.

Points ngatifs all of the same: Faders "fragile", dcalage sizeable L \ R-Maître Given the main RCA outputs that ... trs not pro!

One more thing: I have the EX version, so with faade mirror, she is beautiful, but extremely sensitive to scratches and fingerprints ...

Has everything a dj would actually needs

Price paid

$200.00

UTILIZATION

I dont like the headphone jack location. i'd rather have it on the front panel instead of where my belt is. manual sucks. but i do like the kill switches

buttons are sturdy and i'd definitly take this mixer to a gig and i wouldn't have to worry about it at all. what customer service? i don't think numark really has any customer service.

SOUNDS

This is a really good house mixer and probably good for scratching too. excellent sound. bass is seriously thumpy, mids are rich and the highs are clean.

OVERALL OPINION

Numark doesn't always have some of the cool extra features that other mixers have (features that nobody really uses when playing out). but ever since i can remember numark mixers always have excellent sound quality.

Originally posted on FutureProducers.com
Posted by: Unknown ( 4-, 2002)

This mixer has alot of extras.... that i dont need. good for electronica music.

Price paid

200

UTILIZATION

Nice mixer that would better suit a techno DJ than a hip hop DJ.

SOUNDS

Never had a problem with the sound. appears to be quality.

OVERALL OPINION

Fader died after a week of skracthing. fader is WEAK. bleeding was noticable after one week..... this is not a skratch mixer. the folks at Numark sent me a new replacment fader for free. however taking the old fader out was nuts. one screw was damn near glued in. the gold paint begin to chip away during the 1st week also.

i bought it. loved it. used it. hated it. sold it. the end.

Originally posted on FutureProducers.com
Posted by: Unknown ( 4-, 2002)

Its a great mixer for Newbies. Sound quality is not the best in the world. It is not especially smooth, but it has all of the basics that you need to get started. With 3 band eq and kills, it allows you to do pretty much everything you can handle doing as a beginner. That being said, anybody but a beginner should spend money and buy something better

Price paid

100$

UTILIZATION

I don't think I would ever use it for a live performance. The mixer is surprisingly sturdy and I beat the crap out of it for over a year without having a problem with it.

SOUNDS

Good for techno/house/trance. no effects, but has punch transform buttons.

OVERALL OPINION

It got me started, but I am awfully happy to have a DJM-500

Originally posted on FutureProducers.com
Posted by: Unknown ( 5-, 2002)

Noticable static in the features...but they are there...kill switches, transform, hamster switch, 3 channels, whole bunch of stuff crammed on there...

Price paid: 400 (CAN)

UTILIZATION

I dont fully understand the volume premise, and how to que my records up with it ...or the split,but i never read the manual... most techy djs would proabably undertsand it though, kill switcheds up = permanent down = killed as long as you hold it there, in the middle = no kill. transforms are right in fron of your eyes, probably couldve been set up a little better though

that fader is gonna cause you some trouble if you plan on scratching, i suggest you have a can of tuner control spray handy, your gonna need it, accidental switching of the kill switches is apperent...but its strong i suppose....somewhat...i was using it for scratching and most people that get it wont be so, a 6 on quality fits the bill...

SOUNDS

I wasnt feeling the sound, lotta static, weak fader, but with all those nobs i found it really easy to turn sloppy scratches into some semi-descent sounding shit, im. i could get the sound that i wanted out of the vinyl, ...adequete

OVERALL OPINION

Its alot of fun to mess around with, great for newbies, enough to keep you busy for a while, but not something you'd sleep with like say a Rane ttm56i

Originally posted on FutureProducers.com
Posted by: Unknown ( 6-, 2002)