View other reviews for this product:
double07
Published on 07/06/07 at 18:00
The 700-WorkingPro Is A 700-watt, all solid-state professional rackmount bass boost.
-The classic, timeless, crystal-clear tone of the famous SWR preamp and Aural Enhancer.
-The new Bass Intensify, an instant low-end frequency boost combined with fast-acting compression That literally intensifies the bass response - and a 700-watt Makes amplify sound like a 1,000-watt amplifier.
-It breaks away from the trend of low-to-midline bass amplifiers That come pre-installed in a "head case" - INSTEAD, the amplifiers are WorkingPro two-rack-space rackmount pieces.
-It Provides road-tested and Proven Professional studio tone at a power-to-price ratio unmatched in the Industry.
-It Comes With a two-button footswitch for hands-free control of the Mute (allow for silent tuning and practicing) Enhance and Bass controls
-5-year transferable warranty
-Professional, modern, classy, sleek - all pointing to "pristine," Which is a hallmark of the SWR sound
I took the instructions in SWR.
Hyper complete faade, great connectivity derrire, 2 HP in PARRALLLE (watch the impdance, max 2 x 8 ohms, there is a table provided)
http://www.swrsound.com/support/manuals/pdfs/wpamp_om.PDF
Derrire effects loop, protecting front clip.
The power ... well it is the only problem is the major, I think ... I've never had rponse, but I could never use more than half the power (between knob and master of midi), even between the lowering and raising the master ... He clipped on, and therefore, given the manufacturer's recommendations (can damage the hardware if clipping "levquot; (very relative) ...
So I sent it off, I did not notice. I tried the WorkingPro 400, same problem. And 700 to the end rvle less powerful than my Ashdown Mag 300 (300 watts).
Finally, I opt for a prampli Alembic F-1X and amplifiers Yamaha P 5000 S 2 X 700 watts @ 4 ohms, and it's powerful, trs!
Intensify the bass circuitry (made biscuits!) Is very well, it increases the good bass (like the good cholestrol), it remains clear is the best sound of amp heads I esay transistor (in 30 years ..). The aural enhancer (untranslatable, which increases the purity of sound) is awfully good.
I put 9 for all, but this lack of potential puisance fact waive the purchase, heartbreaking. This shot of note.
UTILIZATION
Not need the manual is not clear prs, APRS few moments I got a beautiful sound, m'tant WorkingPro rd on the 400.
SOUNDS
I play with a signature Alembic Clarke.
I get sound, round, all net frquences, crystalline, Aryan, nothing n'chappe is gnial.
It should completely to jazz-rock, funk, while bassist who likes a clear, round, warm and clean.
OVERALL OPINION
No I do not redo this choice only because of this concern clip.
It DSOL.
Apart from a, if someone knows a way to "dbrider" is a fantastic amp, there's a gnial cheaper, much cheaper than my setup (preamp, power amp) The best of the transistor.
-The classic, timeless, crystal-clear tone of the famous SWR preamp and Aural Enhancer.
-The new Bass Intensify, an instant low-end frequency boost combined with fast-acting compression That literally intensifies the bass response - and a 700-watt Makes amplify sound like a 1,000-watt amplifier.
-It breaks away from the trend of low-to-midline bass amplifiers That come pre-installed in a "head case" - INSTEAD, the amplifiers are WorkingPro two-rack-space rackmount pieces.
-It Provides road-tested and Proven Professional studio tone at a power-to-price ratio unmatched in the Industry.
-It Comes With a two-button footswitch for hands-free control of the Mute (allow for silent tuning and practicing) Enhance and Bass controls
-5-year transferable warranty
-Professional, modern, classy, sleek - all pointing to "pristine," Which is a hallmark of the SWR sound
I took the instructions in SWR.
Hyper complete faade, great connectivity derrire, 2 HP in PARRALLLE (watch the impdance, max 2 x 8 ohms, there is a table provided)
http://www.swrsound.com/support/manuals/pdfs/wpamp_om.PDF
Derrire effects loop, protecting front clip.
The power ... well it is the only problem is the major, I think ... I've never had rponse, but I could never use more than half the power (between knob and master of midi), even between the lowering and raising the master ... He clipped on, and therefore, given the manufacturer's recommendations (can damage the hardware if clipping "levquot; (very relative) ...
So I sent it off, I did not notice. I tried the WorkingPro 400, same problem. And 700 to the end rvle less powerful than my Ashdown Mag 300 (300 watts).
Finally, I opt for a prampli Alembic F-1X and amplifiers Yamaha P 5000 S 2 X 700 watts @ 4 ohms, and it's powerful, trs!
Intensify the bass circuitry (made biscuits!) Is very well, it increases the good bass (like the good cholestrol), it remains clear is the best sound of amp heads I esay transistor (in 30 years ..). The aural enhancer (untranslatable, which increases the purity of sound) is awfully good.
I put 9 for all, but this lack of potential puisance fact waive the purchase, heartbreaking. This shot of note.
UTILIZATION
Not need the manual is not clear prs, APRS few moments I got a beautiful sound, m'tant WorkingPro rd on the 400.
SOUNDS
I play with a signature Alembic Clarke.
I get sound, round, all net frquences, crystalline, Aryan, nothing n'chappe is gnial.
It should completely to jazz-rock, funk, while bassist who likes a clear, round, warm and clean.
OVERALL OPINION
No I do not redo this choice only because of this concern clip.
It DSOL.
Apart from a, if someone knows a way to "dbrider" is a fantastic amp, there's a gnial cheaper, much cheaper than my setup (preamp, power amp) The best of the transistor.