Eurolite Led PAR 64 RGBA 10mm

I use it for 4 months every weekend for at least 4 hours. Still not a Led grilled!! I just tried a sample at Mac Mah, mediocre, but I'm mostly relied on the advice posted on the Eurolite LED PAR64 RGB.

The pros:

Colorful, pretty fast strobe, dimmer, DMX channel setting display, LED benefits (combinations of colors, ridiculous consumption, not hot ...).

The -:

White is difficult to obtain, albeit with amber, you can get warmer colors and avoid wan ...
The yellow is not very good by combining red and green, but amber color easily corrected.
The musical mode is unusable because of the sensitivity internal mic is not adjustable.
Effect "pizza" light if light too close.


Level Value for money is very correct. Everything depends on the use we want to do. I recommend it for all that is Wall Deco. For stage lighting and dance floor is just too much brightness le

At the power is still comparable to a conventional PAR 56 300W. I made the comparison, the PAR56 is more outspoken on the white and yellow, in contrast to the PAR64 LED outweighs all other colors a bit darker, but still it consumes less than 273W .. .
RAP Led by contrast is not at all comparable to a conventional PAR 64 1000w.

With the experience I redid this choice! For a projector that illuminates almost as powerful as a conventional PAR 56, I moved pretty quickly from 4 to 10 LED PAR PAR LED. And I could sell my old PAR 56.

With this in projo Deco, one has for his money. It is not given, but it quickly recovered. It can charge his client more money by playing the side "Environmental" and "Energy Saving"

To note, an 8 seems to me correct, because musical mode unusable and white, poor, but for this price, you're not going to ask him to spit out a blank worthy of a discharge lamp ...

And finally a small photo (test in a room sized) with 6 projectors against the wall.