Not satisfied with those reviews?
Filter
Our members also liked:
4.3/5(8 reviews)
38 %
63 %
Write a user review
Users reviews
Anonymous Published on 06/07/08 at 04:09 (This content has been automatically translated from French)- How long have you use it?
4 years
- What is the particular feature you like best and least?
Plus: The price, simplicitbr />
The Witness: The USB socket is fragile
- Have you tried many other models before acqurir?
None in this price range
- How do you report qualitprix?
Pretty good for its capabilities
- With the exprience, you do again this choice?
No, I did pass meantime Daslight Virtual Controller 2 DMX In and Out00
alex-wocExcellent interface!
Published on 03/19/12 at 15:21 (This content has been automatically translated from French)Really no complaints! This interface I had been recommended by a friend with the past several years, and he had never had any problems with. I recently acquired him, and frankly nothing wrong! For small config certainly, but for 98 €, including postage (Music for Store.de interested), but then it's worth really worth!
Supplied with the interface, a USB cable, user manual and DMX control software. (But I prefer the FreeStyler used as the included software is a bit poor in functionality)
Recommended!00
pierreblc91Well
Published on 10/19/11 at 04:35 (This content has been automatically translated from French)Works well with FreeStyler, no worries or bugg (evening or at home) since I (two months).
In usb dmx, I already use Enttec Enttec pro and open without any bugg either, and the martin LightJockey 2 with software that is of course much better and is much more efficient than freestyler.
the most: do what you asked for not very expensive, 3-pin XLR
Cons: very plastic and made of poor quality
The snap time is hard to follow when it is too low (<200ms), but I do not know if it's just the interface or software. it does not come because of my LED PARs works great on console Granma. it's still a little manip I use as my go leds have strobe function on a channel.
I would definitely reco…Read moreWorks well with FreeStyler, no worries or bugg (evening or at home) since I (two months).
In usb dmx, I already use Enttec Enttec pro and open without any bugg either, and the martin LightJockey 2 with software that is of course much better and is much more efficient than freestyler.
the most: do what you asked for not very expensive, 3-pin XLR
Cons: very plastic and made of poor quality
The snap time is hard to follow when it is too low (<200ms), but I do not know if it's just the interface or software. it does not come because of my LED PARs works great on console Granma. it's still a little manip I use as my go leds have strobe function on a channel.
I would definitely recommend!See less00
soundlight1Published on 03/25/07 at 08:15 (This content has been automatically translated from French)I started the adventure beginning in March 2007,
This device is the first of its kind I use, I chose it for its price simply
I advise everyone to start the ideal c!00
simcomputerPublished on 05/15/07 at 21:32 (This content has been automatically translated from French)I use it for almost a year and frankly it is very good. No problem.
The award was decisive in my choice (just need a soldering iron)
DMX by computer is much easier00- ffwillPublished on 07/03/07 at 00:22 (This content has been automatically translated from French)- How long have you use it?
2 years
- What is so special that you like most and least?
Provided know how to handle the soldering iron is a good produit.ÉDIT FOLLOWING A MP: this version to make the KIT (not pejorative) if not to my recollection there is a version installed.
Simple and effective (automatic installation for XP: no need for additional driver).
Compatible with freestyler and other (soft or home ...)
- Have you tried many other models before buying it?
my first DMX interface
- How would you rate the quality / price?
it is good
- With experience, you do again this choice? ...
Under the same conditions (budget, use): Yes
Note:
For intensive use the …Read more- How long have you use it?
2 years
- What is so special that you like most and least?
Provided know how to handle the soldering iron is a good produit.ÉDIT FOLLOWING A MP: this version to make the KIT (not pejorative) if not to my recollection there is a version installed.
Simple and effective (automatic installation for XP: no need for additional driver).
Compatible with freestyler and other (soft or home ...)
- Have you tried many other models before buying it?
my first DMX interface
- How would you rate the quality / price?
it is good
- With experience, you do again this choice? ...
Under the same conditions (budget, use): Yes
Note:
For intensive use the USB is a bit fragileSee less00 - avilogPublished on 08/16/08 at 15:11 (This content has been automatically translated from French)- How long have you use it? For about a year
- What is so special that you like most and least?
as it develops software interfaces we appreciated the quality of information provided, which allowed us to create software that installs mycontroldmx our customers so they can control their lighting dmx easily from touch screens.
- Have you tried many other models before buying it? Yes enntec etc. ..
- How would you rate the quality / price? Excellent, I bought a kit and in less than an hour he assemeblé state and it worked on.
- With experience, you do again this choice? ... no problem.10 
nachosPublished on 04/26/10 at 12:42 (This content has been automatically translated from French)- 1 year
- The conventional controllers, not computer
- Plus price, ease of use
less: a little slow when you ask him too ...
- Very good, considering its very low price!
- Yes!
It is very easy to use, from the moment or you do not ask him too.00