APG BM3000

Variation of Matrix series of APG home, later renamed by the name "Beam".
Its "ancestor" was the VS4 (but no comparison, as the differences are significant), the 3000 was added to the range after the release of his brothers APG 9000 and 4000 ..

A version for the installation of size and reduced power exists in the ref Beam 3000 C.

The post deals here with the "big" version.

Consists of an enclosure "low" with 2 x 38cm, 2 passive voice (yes, the cutoff frequency of 2 hp is not the same), and an enclosure "hight" of coax with a 17cm x + Engine 1 "(mounted on a coaxial waveguide true, then loaded with a huge pavilion asymmetrical 60 ° x 25 °).


Aes power: 1000W; amp recommended: between 1000 W and 2000 W into 4 ohms.

Personally, this system always worked with 5000VZ or FP10000Q.

Can work alone without subs if you do not need to "curl" the trousers 50 meters.

Dynamic Range: 104 dB/1W/1m, what work comfortably, all instruments even more difficult (like piano ...) breathe at will.


Sound: no sub, it's been four lanes. In other words, finesse and respect for stamps that are respected!
It goes down well and it goes up, not aggressive. Medium beautiful.


Finally, the double 46 below and you find yourself facing a very powerful system,
dynamic and perfectly controlled directivity (cylindrical wave front, plus pre-tilt flag mid-high 5 ° down).

Is no longer manufactured, so more and more rare to find, moreover in perfect condition.

Directivity and power similar to the "Arc" at L-Acoustics, finesse in addition to the CPA (4 lanes against 2).


The set ("isotopes" of her first name) + mid-high coaxial waveguide is the same as the 4000, 6000, 9000 and Uniline (which is neodymium).
Only the charge changing pavilion.

Finally, reliability thanks to the dedicated processor and quality seamless hp.


In short, to listen without moderation!