juloni « Not so simple »
Published on 08/09/14 at 10:21fuzz
UTILIZATION
no manual.
SOUND QUALITY
no idea, pedal failed
OVERALL OPINION
Here is my return on experience rather negative that will be used to offset the autresvavis.
First I must say that I know nothing has electronics, but by looking at several forums I have seen that it is quite possible to install a fuzz pedal itself
same. So I order on musikding Hardware kit + box + soldering iron + pdf for 55 euros.
First bad surprise by opening the package: NO Musikding provides document. There is a diagram and image download on the site, it makes little. In addition, some components included in my package were not included in the diagrams that I downloaded. So I do not know what to do. Short black spot on that side. If you are beginner you will feel loose in the wild.
So I documented as I can: faqs, tutorials on the weld, and I try soldering and desoldering circuits used for training. And finally, when I feel ready, I embarked on the implementation of the pedal.
I spend an afternoon, taking great care, and it was rather a good time.
But here, once completed the pedal just does not work. There is no error in the wiring, my welds are clean and do not drool. I would need a tool to check the status of the components, but I prefer to leave it at that cost.
DIY it's great when it works, I've just lost 55 euros. If you know nothing, and you do not feel like investing a lot of money to equip yourself well there is a good chance that you may be disappointed.
UTILIZATION
no manual.
SOUND QUALITY
no idea, pedal failed
OVERALL OPINION
Here is my return on experience rather negative that will be used to offset the autresvavis.
First I must say that I know nothing has electronics, but by looking at several forums I have seen that it is quite possible to install a fuzz pedal itself
same. So I order on musikding Hardware kit + box + soldering iron + pdf for 55 euros.
First bad surprise by opening the package: NO Musikding provides document. There is a diagram and image download on the site, it makes little. In addition, some components included in my package were not included in the diagrams that I downloaded. So I do not know what to do. Short black spot on that side. If you are beginner you will feel loose in the wild.
So I documented as I can: faqs, tutorials on the weld, and I try soldering and desoldering circuits used for training. And finally, when I feel ready, I embarked on the implementation of the pedal.
I spend an afternoon, taking great care, and it was rather a good time.
But here, once completed the pedal just does not work. There is no error in the wiring, my welds are clean and do not drool. I would need a tool to check the status of the components, but I prefer to leave it at that cost.
DIY it's great when it works, I've just lost 55 euros. If you know nothing, and you do not feel like investing a lot of money to equip yourself well there is a good chance that you may be disappointed.