All user reviews for the Behringer Ultragraph Pro FBQ1502

Many things are ditent here, so I complette denouncing what is missing!
EQ training 19 "!
Analog technology!
Audio connectors: XLR balanced and jack 6.35.
A subwoofer output jack in symmetrical 6.35.
Features good on paper?

UTILIZATION

Configuration: it is simple: the out and in in in in out as. . . . (Mom and Dad)

No need even for manual output sub!
Editing sounds are very difficult for those who are audiophil! (See below)

SOUND QUALITY

I use it for everything, both (guitars, bass, singing, studio mixes in general, insertion of channels, sound)
I like nothing! ! ! (I mean the sound) I bought it just for the money and my studio is a matter personal to cad models that's all! ! ! ! Pleasure or to friends.

OVERALL OPINION

I use it for a few months.
I used another band EQ 2x31 another brand a few years ago I can not remember the brand, it was certainly a bit more expensive then a 1800 frs (3 x the price) but I had no breath and corrections were not criardent like it!
Away! ! ! a very big problem the moment or you want to significantly increase frequencies.
When I say that the sound editing is very difficult it is precisely because of this aggressiveness frequencies that give you the breath of the high frequencies and it very quickly, no need to push really hard to hear those who do not intend for me are people who do not have the ear of a audiophil and do not need an EQ I think!
All this allows time to correct these problems even with wholes and if that does not bother you like me, then you should, but "NOT REALLY" to market your final product.
I would do this choice certainly not if I had to work more seriously.
Even if one day I sold it I not withdraw my opinion not to mislead the purchaser as those who are mistaken sellers.
Either! ! ! for the price it is unbeatable (a wise)

The Ultragraph FBQ 1502 is a 15 band stereo graphic equalizer that will give you full control over your audio signal. It is great for live and studio recordings because of all of its functions. It has a low cut filter that will get all of those low end muddy frequencies out of your mix or out of your live sound depending on where you are using it. It also will do a great job with your feedback frequencies and eliminate them so you will be feedback free!

UTILIZATION

This EQ can be racked and should be racked if you want to get the best use out of it. We have it in our rack case that has about 8 racks total in it so we never have to take it out we just carry the whole case with us when we go to perform or work a set. The FBQ 1502 could not be easier to use, you will not need a manual to use it as long as you have some basic knowledge of how EQ works. Using this EQ is even better in my opinion than using a similar EQ in a VST version because I feel like hardware just works better and you do not ever have to worry about it crashing.

SOUND QUALITY

Sound quality is amazing when working with this EQ. You can get it to create any sound you want. It may take a little more work though if you are use to working with computer based EQ.

OVERALL OPINION

We have also used this in a studio as the main equalizer and we loved working with it. It gave use the sound we were looking for when using it as our master EQ. There are not bad things to say about this unit, it works great and has no problems. For the price that it cost it is a must have for any live musicians or studio musicians because it only cost 100 dollars. You will love the sound you can get with it, you cannot beat this value for the price.

15 bands graphic equalizer analog stereo or 2 separate mono.
Rack (the rack mount kit can be removed).
TRS or XLR connector only.

UTILIZATION

Very simple.
FBQ has a function which allows to analyze the sound spectrum input and correct the sound against the Feedback / feedback effects. This device is not very convincing ...

SOUND QUALITY

Which is significant.
Transparent effect.
Not distort the signal when the bypass branch.
No particular breath, either at position 6 or 12 + /-dB correction.
This is good!

OVERALL OPINION

I use it for a few days to make the correction facade.

It is very good but two faults (the second is to the conditional):

* Quality knobs so linear sliders "float" on their tracks, and we will see if they wear tight or it will take to clean the bomb touch regularly to prevent them "crachouillent";

* Knobs are notched only zero and not by the degree of rotation, it loses precision settings (this being in the dark is better to identify with a single point!).

So a priori it is good!

look at the data sheet.

UTILIZATION

super simple setup, I have not opened the manual and everything works perfectly.

SOUND QUALITY

I use the equalizer at the end of the chain, just before the receiver / recorder, so there goes directly to the mix and not an individual instrument.
The result is effective, but keep in mind the overall impact of a change in the sound image returned, and it is easy to cause disasters instead wonders if there is not enough in finesse ...

OVERALL OPINION

I use it for a few months. I have not tried other models.

If the LEDs on each slice are at first a little gadget, it may be necessary using the functions integrated spectrum analyzer, or when working in low light or darkness live ...

Unbeatable value for money (considering the price).
With a slightly higher budget, I craquerais for ULTRAGRAPH PRO FBQ6200, his big brother

2 x 15 band equalizer analog + / - 12 dB
1U 19 "
Inputs / outputs balanced XLR and jack 6.35
No computer link
1 knob output level by
A bypass switch (e) by
A switch range + / - 6 dB + / - 12 dB
A switch on / off Feedback Detection System (knob the adjustment of each band has a diode in the diode mode FDS implement a spectrum analyzer that can be used rustic to find the frequency that feedback in the input signal)
Also has a mono output low-pass cutoff frequency adjustable

UTILIZATION

It is used quite intuitively. It is quick to make it work. The manual is good, but normally we do not need. The pots are a bit small but in 1U there is no miracle. I wish I had a mid-point a little stronger but it's detail.

SOUND QUALITY

The sound seems to me to correct. The breath is especially present in range + / - 6 dB. In range + / - 12 dB is acceptable, especially given what I do. I do not use equalizer in PA but equalizer bass guitar.

OVERALL OPINION

I use it for 15 days, it does the job for 100 euros, it's pretty awesome. I return my bass pedal in a Behringer AB100 which is actually a switch but I use as a preamp, then I attack the equalizer (one of only two channels) and a power block and then craft a subwoofer Behringer ULTRABASS BB115. With that I can really sculpt my sound and turn over frequency if the room has a resonance. Before I used an EQ pedal 7 frequencies but it is not enough. I did not take 31 frequencies because I was afraid of losing me. 15 frequencies it's not bad.

Cacarteristiques level, I think my colleague "martinc" has everything detailed lol.

UTILIZATION

Extremely simple configuration (more than a parametric equalizer). The options are few for a precise and simple. To return to the faders I find them of very good quality, technical "oil bath" very effective for fine adjustment.
FBQ function that detects feedback frequencies is inefficient and does not really reflect the reality of the signal. It is true that we perceive a breath if you push too much pots.

SOUND QUALITY

I use it "upstream" of a ALESIS RA150 amp and compressor ALESIS 3360.
But I hardly touch the signal, I use it mainly for the low end enforcer.

OVERALL OPINION

I use it for 2 months.
+ = Quality faders "oil bath" / strength of the case
- Gadget = system FBQ / breath at high level
Good quality / price ratio.
I recommend it to anyone who wants aquérir a simple EQ without having extensive knowledge in the audio.

2x15 EQ bands, analog. Simple connection jacks and XLR in / out.
MODEL rack, while sr.

UTILIZATION

Simple configuration, and at the same time to complte the use of such devices.
Manual clear and in French.

SOUND QUALITY

I use this device in my home studio, it is part of Behringer rack (no, I do not have shares in Behringer!). Good job, who knows how to use it as any, if it is not using it, Obviously .... Rpond easily the slightest touch, trs effective use with smoothly. I use obviously not the anti-feedback, I'm home studio ..

OVERALL OPINION

I use it for a year, quality unbeatable price, like all Behringer! APRS, more expensive, but ...

I was looking for an equalizer two times fifteen bands for my sound system. Wanting a peavey, the store tells me the problems of the equalizers of this trademark. So my choice is the FBQ 1502, I received yesterday (my equalizer audiopphony was sold).
It is 19 "rack, and rack ears can be removed if desired. That's not bad, but I think the other brands offer. This material provides an analog sound, you can plug in xlr 6.35 or mono jack, it offers a subwoofer output. Its general appearance is nice, what I find unfortunate is that the frequency knobs light up at start, this gadget is, to see if this prove practice.
In terms of its quality control frequency, I have not tested yet, he will make his baptism in two weeks. If he convinces me not, I sold it and if its quality is correct, I would use up the rope.
I do not know if I nracheterais this brand, as tested with a reference table vmx 1000 during a birthday I was very disappointed.
The manual and use is simplicity itself.
I judge the quality / price quite decent. I donnerauis an assessment of sound quality in two weeks.

UTILIZATION

The general configuration is simple.

SOUND QUALITY

I use the equalizer with a table a img Stage Line and 2 x 300 amp waztts.

OVERALL OPINION

I hope he moved Dooner more satisfaction than my other EQ.

In the opinion of rponse Hypertension, below, who can advise on hardware that "just received" and to paste a single painting because it has not understand the use of this site, so I will give my opinion on a hardware that probably j'achterai.
On paper, CHARACTERISTICS are excellent. I have more hardware from Behringer, including a crossover CX-2310 and, frankly, I wonder how this company DGIG margin. Of course, it's made in China but how many brands are not in this case?

UTILIZATION

I recommend Hypertension (!) To read the manual supplied with the hardware in French and, as usual with Behringer, trs well. I download on the site.
It explains, in particular, what use are led sliders. In this case identify frquences attachment, since it is dot technology FBQ (feedback detection system) is that the reduction of feedback.

SOUND QUALITY

Behringer frquemment is used in HiFi through audiophages which, as everyone knows, are gnralement cutters hairs. Some n'hsitent not change components for a cot 2 to 3 times suprieur said hardware, which is the limit of laughable.
N'tant & a passion of his music, my crossover is cbl HiFi and gives me satisfaction Entire. If I had to manufacture it (which I did at other times) I would, for this price, the box!

OVERALL OPINION

The output sub is an excellent IDE and, in agreement with the satellite falling relatively high, eliminates the need of an asset. Dj is a result of acqurir. In sound, since we are in a prsence EQ, you can add a big sub and adjust levels.
Users of this excellent site should always keep in mind the report qualitPRIX, which must always lay their opinion. EQ 2x15 frquences 85 euros / O symtriques, exit sub-detection and feedback is not under the hooves of a horse ...