All user reviews for the Graph Tech Guide cordes - Trem Nut

I brought a SERIES of changes rversibles my Fender Stratocaster American Standard because, despite the passage in two makers, the problem (buzz) persisted.
I changed the nut head, the guide ropes and bridges.

Submitted for review on the "Graph Tech String Retainer Roller", it is not the spices of the photo above.

https://www.stewmac.com/shop/Hardware% 2C_parts/Electric_guitar: # _String_trees_retainers/1/Roller_String_Retainers_For_Guitar/Pictures.html details ( https://www.stewmac.com/shop/Hardware%2C_parts/Electric_guitar:_String_trees_retainers/1/Roller_String_Retainers_For_Guitar/Pictures.html#details )

The replacement of the pice silent trs simple since the thread is the same.

The original guide to Start Submitted a pin which positions it correctly on the head of the handle. So there are two holes in the head, one for the screw and one for the pin. Unfortunately, the guide Graph Tech does not have that pin and it does so with the screw and it must be positioned correctly. The graphite block of the guide is larger than the original pice and the Strat affects the look.

The purchase of this pice is in pairs, but I did not put the deuxime guide because I did not want to dig a new hole in the head. My changes were to be rversibles without a trace.

I am not yet sure of the usefulness of such replacement. The original pice is better and I think do not know if the two wheels REALLY justify the purchase. A bit of lubricant on the original may be worse just as effective. No doubt I will submit the original pice.