Power Attenuator 15 classified ad
New ad alertImages
Reviews
5.0/5(3 reviews)
100 %
Write a user review
Micmic__excellent!
Published on 07/12/12 at 06:21 (This content has been automatically translated from French)Clean job, no complaints, beautiful work.
I put 9, I would have liked one more level of attenuation.
Connected, we play ... Don't Give a ...
Be careful though not to mis-connect things ...better double check.
there, slap.
bluffed
I play a little giant, class A amplifier architecture known 12au7/el84
super clear sound very hot but very strong (even if small ad 5 watts) so 90% of the time throttled to death for a reasonable volume lounge.
amp so thoroughly well warmed EL84, obligated, to-18db
trans-pa-tion!
the sound is just weaker and it is amazing, I expected a somewhat muffled sound like I used to hear with other attenuators on other amp but there it is anything,...…
I put 9, I would have liked one more level of attenuation.
Connected, we play ... Don't Give a ...
Be careful though not to mis-connect things ...better double check.
there, slap.
bluffed
I play a little giant, class A amplifier architecture known 12au7/el84
super clear sound very hot but very strong (even if small ad 5 watts) so 90% of the time throttled to death for a reasonable volume lounge.
amp so thoroughly well warmed EL84, obligated, to-18db
trans-pa-tion!
the sound is just weaker and it is amazing, I expected a somewhat muffled sound like I used to hear with other attenuators on other amp but there it is anything,...…
Read more
Clean job, no complaints, beautiful work.
I put 9, I would have liked one more level of attenuation.
Connected, we play ... Don't Give a ...
Be careful though not to mis-connect things ...better double check.
there, slap.
bluffed
I play a little giant, class A amplifier architecture known 12au7/el84
super clear sound very hot but very strong (even if small ad 5 watts) so 90% of the time throttled to death for a reasonable volume lounge.
amp so thoroughly well warmed EL84, obligated, to-18db
trans-pa-tion!
the sound is just weaker and it is amazing, I expected a somewhat muffled sound like I used to hear with other attenuators on other amp but there it is anything, the sound is the same with or without a safe with one of the potential benefits of its optimum gear without busting ears and the neighbors
I received this morning, tested on.
Last night I played at a volume, now I play at 11 lol.
I rediscovered my gear, that's what i like but that was mostly unusable.
So in the end, because I put on my 9 class A 5w, ONE 12 ", while thoroughly lacks an additional level of mitigation that will be perfect, but it's great
I put 9, I would have liked one more level of attenuation.
Connected, we play ... Don't Give a ...
Be careful though not to mis-connect things ...better double check.
there, slap.
bluffed
I play a little giant, class A amplifier architecture known 12au7/el84
super clear sound very hot but very strong (even if small ad 5 watts) so 90% of the time throttled to death for a reasonable volume lounge.
amp so thoroughly well warmed EL84, obligated, to-18db
trans-pa-tion!
the sound is just weaker and it is amazing, I expected a somewhat muffled sound like I used to hear with other attenuators on other amp but there it is anything, the sound is the same with or without a safe with one of the potential benefits of its optimum gear without busting ears and the neighbors
I received this morning, tested on.
Last night I played at a volume, now I play at 11 lol.
I rediscovered my gear, that's what i like but that was mostly unusable.
So in the end, because I put on my 9 class A 5w, ONE 12 ", while thoroughly lacks an additional level of mitigation that will be perfect, but it's great
See less
70
»
pissalouIt does the job
Published on 06/06/12 at 04:53 (This content has been automatically translated from French)This is a pad bridged T (Bridged T-pad in English) so no loss of treble on other attenuators. Attenuation between-6dB and-18dB + bypass.
6.35mm jack connectors. Available in 8 and 16 ohm (mine is 8).
Simpler you die: you turn the knob, ca attenuates.
The beast comes with an A4 leaflet that I have ever read.
the only catch is that the rotocontacteur is not firmly attached to the box and turns on itself, not really serious but annoying.
It exactly meets my expectations. I use it between my Blackstar HT-5 and a 4 * 12 cabinet:
1 - its clear you can cruncher without having a head full
2 - in the drive channel, it is less noticeable but you get a better adjust the overall...…
6.35mm jack connectors. Available in 8 and 16 ohm (mine is 8).
Simpler you die: you turn the knob, ca attenuates.
The beast comes with an A4 leaflet that I have ever read.
the only catch is that the rotocontacteur is not firmly attached to the box and turns on itself, not really serious but annoying.
It exactly meets my expectations. I use it between my Blackstar HT-5 and a 4 * 12 cabinet:
1 - its clear you can cruncher without having a head full
2 - in the drive channel, it is less noticeable but you get a better adjust the overall...…
Read more
This is a pad bridged T (Bridged T-pad in English) so no loss of treble on other attenuators. Attenuation between-6dB and-18dB + bypass.
6.35mm jack connectors. Available in 8 and 16 ohm (mine is 8).
Simpler you die: you turn the knob, ca attenuates.
The beast comes with an A4 leaflet that I have ever read.
the only catch is that the rotocontacteur is not firmly attached to the box and turns on itself, not really serious but annoying.
It exactly meets my expectations. I use it between my Blackstar HT-5 and a 4 * 12 cabinet:
1 - its clear you can cruncher without having a head full
2 - in the drive channel, it is less noticeable but you get a better adjust the overall volume because the volume curve of my HT-5 is not linear, it would be more logarithmic. Therefore ideal for playing at low volume, with a non-amplified musician or a disc.
I use it for a few days and I do not débrancherai soon.
I wish I though a little more attenuation, 30dB and-such a no-6dB between each but I quibble a bit.
The advantage of this product is its price, well below any other attenuator.
For most of us hobbyists, it is possible to achieve an attenuator with wirewound power resistors, it costs no more than 30 € to tinker. I intend just to get into the realization of 50W version.
6.35mm jack connectors. Available in 8 and 16 ohm (mine is 8).
Simpler you die: you turn the knob, ca attenuates.
The beast comes with an A4 leaflet that I have ever read.
the only catch is that the rotocontacteur is not firmly attached to the box and turns on itself, not really serious but annoying.
It exactly meets my expectations. I use it between my Blackstar HT-5 and a 4 * 12 cabinet:
1 - its clear you can cruncher without having a head full
2 - in the drive channel, it is less noticeable but you get a better adjust the overall volume because the volume curve of my HT-5 is not linear, it would be more logarithmic. Therefore ideal for playing at low volume, with a non-amplified musician or a disc.
I use it for a few days and I do not débrancherai soon.
I wish I though a little more attenuation, 30dB and-such a no-6dB between each but I quibble a bit.
The advantage of this product is its price, well below any other attenuator.
For most of us hobbyists, it is possible to achieve an attenuator with wirewound power resistors, it costs no more than 30 € to tinker. I intend just to get into the realization of 50W version.
See less
70
»
bdkbossThis great box!
Published on 05/28/12 at 01:27 (This content has been automatically translated from French)there is a power attenuator for tube amp of up to 15 Watts (5 marshall class example, which is my case!). Made in France
it has 6 degrees of attenuation, ranging from -0 to-18dB.
fully analog, simply plug between the power stage and the HP
one branch, is heated lamps and HERE WE GO!
it to the sound of the amp without any alteration, with a volume bearable apartment!
completely transparent! What about best!
I was tempted to change myself, or play at home on a pod, until I came across this great thing!
it has 6 degrees of attenuation, ranging from -0 to-18dB.
fully analog, simply plug between the power stage and the HP
one branch, is heated lamps and HERE WE GO!
it to the sound of the amp without any alteration, with a volume bearable apartment!
completely transparent! What about best!
I was tempted to change myself, or play at home on a pod, until I came across this great thing!
100
»
Tech. sheet
- Manufacturer: Plug & Play Amplification
- Model: Power Attenuator 15
- Category: Guitar Power Attenuators
- Added in our database on: 02/07/2012
We have no technical specifications for this product
but your help will be much welcomed
»
Other categories in Guitar Amp Parts & Accessories
Other names: powerattenuator 15, powerattenuator15, power attenuator15, power at 10 uator 15, powerat 10 uator 15, powerat 10 uator15, power at 10 uator15, power attenuator 15