Remyxc
Published on 10/14/09 at 16:57
- Switch On / Off
- 2 output reducers: 20% or 50%
- Tmoin Overload (for speaker protection)
- Aration system of transistors with thermostatic control.
- Slecteurs A / B on the front panel for selection of 2 outputs stro indpendantes.
- Headphone output independent entrance (with level)
(Or even technical specifications below)
I use this amp for about 3 years, after having tried dozens. Revox quality! This is standard. Unbeatable. It's easy to use, unbreakable, and formidable efficiency. Rare and therefore expensive. Collectors and / or lovers of sound, go head down if you see one. It will not be mine, I'll keep prcieusement!
Continuos Sine Wave Power
2 x 60 W / 4 Ohm
2 x 45 W / 8 Ohm
2 x 30 W / 16 Ohm
Music Power
> 2 x 90 W / 4 Ohm
Has Distortion
rated output / 4 Ohm
<0.1% / 1 kHz
<0.2% / 40 Hz ... 15 kHz, 65 W 0.1 W ...
Frequency Response
20 Hz ... 20 kHz
1 dB is 4 Ohm
+ 0.5 dB is 8 Ohm
Powerbandwidth
10 Hz ... 55 kHz / 4 Ohm
10 Hz ... 65 kHz / 8 Ohm
Signal to Noise Ratio
Referred to 60 W on 4 Ohm
> 95 dB input terminated with 220 ohms
Crosstalk
> 80 dB / 1 kHz
Input Impedance
20 kOhm
Input Sensivity
for 60 W / 4 Ohm
1.1 V
- 2 output reducers: 20% or 50%
- Tmoin Overload (for speaker protection)
- Aration system of transistors with thermostatic control.
- Slecteurs A / B on the front panel for selection of 2 outputs stro indpendantes.
- Headphone output independent entrance (with level)
(Or even technical specifications below)
I use this amp for about 3 years, after having tried dozens. Revox quality! This is standard. Unbeatable. It's easy to use, unbreakable, and formidable efficiency. Rare and therefore expensive. Collectors and / or lovers of sound, go head down if you see one. It will not be mine, I'll keep prcieusement!
Continuos Sine Wave Power
2 x 60 W / 4 Ohm
2 x 45 W / 8 Ohm
2 x 30 W / 16 Ohm
Music Power
> 2 x 90 W / 4 Ohm
Has Distortion
rated output / 4 Ohm
<0.1% / 1 kHz
<0.2% / 40 Hz ... 15 kHz, 65 W 0.1 W ...
Frequency Response
20 Hz ... 20 kHz
1 dB is 4 Ohm
+ 0.5 dB is 8 Ohm
Powerbandwidth
10 Hz ... 55 kHz / 4 Ohm
10 Hz ... 65 kHz / 8 Ohm
Signal to Noise Ratio
Referred to 60 W on 4 Ohm
> 95 dB input terminated with 220 ohms
Crosstalk
> 80 dB / 1 kHz
Input Impedance
20 kOhm
Input Sensivity
for 60 W / 4 Ohm
1.1 V