SOUND: Overall this pedal has great sound; a boutique-quality pedal developed by an amplifier company, which says a lot. The tones it produces are wide and varied, due to the range of both the Drive control and the EQ. If keeping the EQ flat and Drive all the way down, the MTN-10 is a literal clean boost. Most supposed ‘clean boosts’ on the market tend to add a bit of gain or color in the signal, but the MTN-10 all the way down does not, which is impressive. With the Drive a touch up and toward 9-o’clock there is a nasty bit of hair in the signal, that dirty overdriven tone ideal for vintage Rock and Rockabilly. Once around 10-o’clock and upward of 12-noon and there is a solid crunch gain tone. When turning the Drive to 1-o’clock and beyond that overdriven sound has more of a distortion quality – a fine grain that cuts well through the mix. The EQ knobs are touch-sensitive and vary greatly (particularly the treble). Back off the midrange slightly with a hint more bass and treble and you get a great sounding scooped tone. Crank up the midrange and it becomes very heavy and modern. Overall, this is one pedal that has a bigger range than most – from an actual clean boost to Bluesy swamp rock to punchy high-gain tones that lives in the realm of Stoner Rock and Doom Metal. Best of all, the MTN-10 is rather responsive to playing dynamics, and also very transparent as it brings to life an amp’s underlying characteristics (which means this pedal will sound different with different platforms). BASIC OPERATION: To achieve a truly clean boost, simply set the Drive all the way down and the Volume around 12-noon (this may have to be increased or decreased, depending on your amp’s setting and how the MTN-10 behaves with your amp). The EQ likely will all be turned to 12-noon or possibly a bit of tweaking (depending on the boost sound and tone coloring desired). How much Drive you want to add to the mix depends on what sound you want, but also whether working with a clean or dirty amp. The MTN-10 has an aggressive Drive when low to moderate, and so combining it with a dirty amp likely will not require anything more than the pedal’s Drive set at 10-o’clock (and I suspect less with truly high-gain amps). With a clean amp there is far more flexibility, with some modest dirt at low settings, crunchy Rock toward the middle and more high-gain distortion (almost thick fuzz-like at full bore) thereafter. The EQ knobs make a big difference with just a slight turn in any direction, ideal for finding your signature sound or to accommodate short-comings of your gear. Begin with everything at 12-noon and adjust from there. OVERALL IMPRESSION: Karma is known for hand-wired amplifiers, and with such craftsmanship remaking and improving a classic pedal from the 80s (the Ibanez Mostortion), you’re in for several surprises. True bypass, the MTN-10 utilizes the original CA3260 chip, albeit with upgraded parts throughout. Unbelievably flexible, the MTN-10 delivers clean boost, gritty Rock tones and even fat Metal distortion. The wide-ranging EQ may be useful for sculpting some very unique and varied tones, but also serves to brighten up dark amps/pickups or to tame bright, harsh ones. At $199 USD this is a typically priced pedal (neither low-budget nor boutique ridiculous) and you get a lot of tones and quality at that price. Seriously the MTN-10 works for Country music as well as Hard Rock… and beyond, and I suspect Karma Guitar Amplifiers wanted it that way and to accommodate guitar players from different walks of life and different music genres.
The MTN-bass is a spin-off of the popular MTN-10 (improved Mostortion) for lead/rhythm guitar, with eight adjustments to make it bass-friendly (and to work within that frequency range). The possibilities of this amp-like drive/distortion pedal are beyond distortion, however. With the gain low (less than 12-o’clock), there is a distinct energy not achieved with a typical bass gear, even those amps (or a bass/guitar amp/cab combo) that are dual in nature, which is what most modern bassist desire. In essence, the MTN-Bass offers an attack that is so clear that it surfaces proudly in any mix, removing any muffle or mud. Most bassists and studio mastering know what I’m referring to, as a heavy kick drum with bass sometimes can produce a big bottom end that saturates a track, viz., it can be difficult to discern what the bassist is playing. This is the first thing that impressed me with the MTN-Bass pedal, in that it elevates a regular tone into that which I find more confrontational with notes pouncing forward. https://www.youtube.com/watch?v=iO3IUAgc3Xo&t=7s As the Drive increases with this true bypass pedal, there is greater distortion (although that depends on the guitar and amp setting, which I’ll address soon). Now, this distortion is very smooth. I’ve tried other bass drives, including the one built in the Orange Bass Butler (which I find a bit rough or grainy if you push it past 1-o’clock). With the MTN-Bass’ drive up full, there is more saturation, yet it maintains a velvety complexity very different from a typical ‘breaking up’ effect. In essence, the MTN-Bass increases subtle harmonic richness through its touch sensitive dynamics, but while keeping control of the drive’s quality. The headroom is massive, to say the least. Be prepared to turn your amp down as you will drown out other musicians! If you pay attention to the demo included in this review, you will notice that the MTN-Bass’ volume control never goes past 9-o’clock, since I kept the amp’s output consistent for the demo. To increase that volume even slightly necessitates a corresponding decrease in amp output. Of course, such a boost may be desired when pushing for a solo or a more forceful and hard-hitting segment of a song. The EQ offers tweaking for bass, midrange and treble. This highly-flexible, wide-ranging tone control is superb, in that the degree of possible sounds are massive, from utterly deep and brooding, for stoner rock, to punchy klang for more modern metal styles. It also should be noted that the MTN-Bass has tremendous bottom end response, although very tight and not mushy. This may require a slight reduction in bass via the amp or guitar if you want to keep the heaviness consistent whether the pedal is on or off. To get the most from the distortion, to make it really pop, activation the bridge pickup (for a higher end tone) and using a pick is most effective. However, for those players who know how to snap the strings and thump with the thumb, the distortion can be heard very well without a pick. From there you can adjust the EQ for taste, whether going for a mid-scoop, greater midrange and treble, etc. From the ‘classic’ pithy sound of Jaco Pastorius to the much-revered drive of Lemmy, the MTN-Bass can deliver the goods. Developed by Karma Guitar Amplification, the MTN-Bass is all about quality, and beyond its sonic palette. Made in the USA (with as many parts sourced therein), it has a premium quality plated through pcb, a CA3260 IC chip (as in the original) and a custom powder coated and silk-screen chassis. Fairly new to the market, any bassist serious about tone and wanting to stand out in the band (or merely for more enjoyable home playing) definitely should investigate the MTN-Bass.