Log in
EN
FR

Night Owl Industries

4 products found

Categories
Filter
Sort by
Evaluation
  • Reviewed or not
  • Editor’s award
  • Reviewed by Audiofanzine
Availability
  • Available or not
  • Sold new or used
  • Sold new
  • Sold used
Must-have products
  • All products
  • Flagship products
  • Best rated products
  • Hot products
  • Popular products
Price
  • Freeware
€
Clear
Sort by
  • Popularity
  • User ratings
  • Price - low to high
  • Price - high to low
  • Used price, increasing
  • Used price, decreasing
  • Name (from A to Z)
  • Name (from Z to A)
  • Added on
Choose a category
Sort results
  • Popularity
  • User ratings
  • Price - low to high
  • Price - high to low
  • Used price, increasing
  • Used price, decreasing
  • Name (from A to Z)
  • Name (from Z to A)
  • Added on
Filter results 4 results found
Evaluation
Availability
Must-have products
Price
  • Freeware
Show results

The best Night Owl Industries reviews

The reviews Audiofanzine members found the most helpful.
  • « Easy to Use with an Improvement in Sound »

    SOUND: As a stand-alone preamp, the Edison is very clear, yet full-bodied. When hooking it up to an Axe-Fx II (with Marshall cab simulation), the first thing I noticed is how ‘amp-like’ the sound was… headroom and dynamics without that processed sound. Now, to be fair, the Edison Preamp is an actual tube preamp, and so it should not sound artificial or lackluster, but matching it with a cab-sim, as opposed to an actual cab, brought about a quality of sound I was not expecting. Although one of the better sounding (and behaving) cleans I’ve heard, the Edison Preamp still needs to be tamed somewhat. Because it offers a lot of headroom, having the volume up too much can produce some distortion or rumbling (like an amp breaking up, which it likely is doing). Nothing wrong with that, but either the preamp’s volume or the guitar’s volume need to be dialed back slightly if you want to avoid those artifacts. On that note, the Edison Preamp does clean up exceptionally well and sounds great as you dial back a guitar’s volume knob. As for the preamp, it sounds good at lower volumes, but you definitely can hear more note fullness and fatness when turned up half-way or beyond. When combined with other gear the Edison Preamp offers a lot. It makes for a great pedal format, whether dealing with clean-type effects (delay, modulation) or distortions/drives/fuzzes. Even when combined with other preamps (I added the Edison to a few Victory preamps, the Kraken and the Countess) the Edison mixed with those other preamps incredibly well, for a bolder and fuller sound. What should be noted is that the Edison Preamp has fantastic warmth to it, which can make other gear sound a touch darker, which means upping your treble or upper-mids a bit to balance out the tone. Regardless of this minor quirk, the Edison does not color other gear very much (very little in fact) so that everything simply sounds ‘hot-rodded.’ OVERALL IMPRESSION: The Edison Preamp is aptly named, since it looks like a glowing light bulb within its aluminum housing. Developed by Night Owl Industries, this preamp has exceptional warmth, tons of headroom and pure amp-like tonal qualities. The Edison Preamp’s simple, yet effective design has a built-in voltage tripler to push the all-tube EF86 preamp for a real amp tone. It functions well as a stand-alone unit (in pedal platform), but also works well in pushing the limits of other preamps/amps (solid state or tube). Its third and obvious use is as a clean boost, but not any ordinary boost, since its full-bodied and robust tube sound will fatten up your tone for some great lead soloing. Its green glow (both tube and footswitch ring) not only look ominous, as though it came from a mad scientist’s laboratory, but makes for easy location on a pedal board and on dark stages. At $225 the Edison Preamp is of average cost and very decent value considering how it enhances other gear, besides working well with guitar, bass or a recording rig. Simple to use and effective best sums it up. GENERAL USE: Although Night Owl Industries suggest “try it in front of your favorite distortion pedal or another tube effect for endless possibilities,” I found my tone and results as good when adding the Edison Preamp AFTER some effects and other preamps (likely because my cab simulation came later in the chain). The sound was fine when used before in other instances, but placing it after impressed me as much and depending on the gear. The Edison Preamp is about as easy to use as it comes – a footswitch to turn it on and off. How great is that? No tone controls, although you need to adjust the volume accordingly (whether aiming for parity or boosting the signal). Insofar as the volume is concerned, how much you turn it up will depend on what is being connected to it. For example, if using the Edison as a stand-alone preamp (going into a cab or cab simulation) and with some pedals, the volume can be turned up more than if using the Edison to push an amplifier or other preamp. Then again, by keeping the gain/volume down on another amp or preamp, then certainly more volume can be had with the Edison (depending on what balance or ratio sounds best to your ears). Regardless of the setup, you will find there is a sweet spot in coordinating gear, so that you have enough push and sound fullness without adding distortion or artifacts. OTHER DETAILS: A slightly odd shape, the Edison Preamp measures larger at the top than bottom, but generally is a standard sized pedal. Measuring 3-inches across the top, 2.25-inches across the bottom, 4.25-inches long and 1.5-inches high, this preamp is lightweight and likely an aluminum housing (since it feels light) with center glass window (to view the cool-looking green light and valve). All connections, including the volume control, are located on the sides, which does take up a bit more pedalboard real-estate, but nothing excessive. The footswitch, which is SILENT (you don’t hear a thing when turning it on and off) has a solid click and is of good quality. The Volume knob also feels of good quality when turned. The glass window sits below the aluminum chassis, and positioned within the design of the pedal in such a manner that damage from a stomping foot is very unlikely (don’t wear high-heels). The Edison Preamp powers up via a standard 9VDC 250mA supply. Tubes can last a matter of months or even years, depending on usage and any potential flaws (inherent with tubes), and so the Edison’s reliability in regard to tube life cannot be determined with any confidence. However, Night Owl Industries does test each Edison Preamp and tube (via Amplitrex testing) prior to shipping, which helps to weed out any immediate operational issues in advance.

  • « Highly flexible, multiple boosts and tube driven »

    If you’re looking for ‘boutique,’ then Night Owl Industries fits that bill. This company’s focus is on tone, while delivering something unique, and its current project is no exception – The Parabellum Drive (a collaboration with Dunwich Amps). It can hotrod a clean channel or make a dirty channel pop with pizzazz, as demonstrated in the video below. I would consider the Parabellum a low to medium gain drive, but when fully-cranked, the thick distortion does bring you into Sludge and Doom territory. https://www.youtube.com/watch?v=PUKuIdM405o There are a number of aspects that make this drive unique. First, this is a 3-stage parallel EF86 tube-boost driven distortion. It does an amazing job at clearing up a tone (removes some mud), as the signal begins with a buffer, then splits into three signals, each going to a different germanium distortion: 1) traditional; 2) higher gain; and 3) a hybrid diode/germanium. These three distinct voices are processed individually then mixed back, thus producing a complex distortion that is jam-packed with harmonics, definition and detail that you would not get with conventional, in-series pedal builds. Second, the active and passive EQ section is quite expansive, from tight lows to exceptional highs (it can transform the darkest and muddiest amps and pickups), with a midrange that “lay a perfect fourth in interval above and below the bass and treble controls, respectively.” Different pedals have EQ sections with a decent range, but the Parabellum’s is so broad that it compliments anything you throw at it. Third, and this is the kicker, each control (Volume, Treble, Midrange, Bass and Gain) has its own GAIN switch (the mid boost switched was tuned by Dunwich Amplification, which also expanded the EQ section and modded the preamp for more gain). What you can do with this pedal is massive, and I tried to demo this various knob tweaking. But imagine dialing into a great EQ setting, but you wanted to boost the treble frequency, or perhaps the midrange or bass… or all three! In doing so, you do get a different result than merely setting the EQ on its own. And so, the Parabellum not only is a drive/distortion pedal, but it’s a treble booster… a midrange booster… and a bass booster. What I noticed is that the boost on each EQ emphasizes enough that if you like the treble at a certain frequency, it usually sounds better backing off a little and then engaging the boost (however, that’s how I like it). The boost on the Volume and Gain also produce unique results. The Volume boost pushes the amp harder, which results in more breaking up and a bigger robust sound – and this is true even if you turn the Volume knob all the way down, then engage the boost. The Gain has a very diverse range. To hear anything through the pedal, the Gain knob needs to be turned up a touch, around 8-9 o’clock. The result is a fine grain distortion that puts a bit of hair on a clean channel and makes a dirty channel sing better with more detail. As you turn it up and nearing 12-noon, the tone is more intense, thicker and with some degree of saturation. Once past 12-noon, the saturation increases to the point of sounding like a distortion/fuzz combination (particularly full-bore). Now, if you happen to like the sound of the distortion around 10-o’clock, whereas dialing up more Gain results in too much saturation, then all you have to do is engage the Gain’s boost and you get that more intense rip-roaring tone. Further, turn down the Volume somewhat (or all the way) and flip on the Volume’s boost and the tone becomes more monstrous. Overall, this is a serious pedal on so many levels, and if you need your tone to cut through the mix, the Parabellum does an exceptional job. I tried it with clean, dirty and hi-gain amps, and it sits perfectly well with the gear. I tried single-coil and humbuckers, with no issues and everything sounded great. In fact, it works well with a bass guitar, giving it a tighter bottom end and more punch – perfect for rock and metal. Two thumbs up!

  • « Sweeping EQ Abilities in a Wah Style Pedal »

    SOUND: EQ can do a lot for your tone, but when you consider applying EQ in a dynamic sense you then enter a different realm. With Q you can set the Treble and Bass (two knobs), but then fluctuate the Midrange mix (via the pedal’s treadle). The pedal’s three bands are centered on the note C in 3 different registers (to match the musical note and equivalent frequencies) for the following combinations: 65.41 Hz (C2 bass knob), 523.25 Hz (C5 midrange treadle) and 2.093 kHz (C7 treble knob). You can achieve a wide array of tone changes so that as you work the pedal it can mimic a phaser or wah (although not sounding like a traditional wah), or can be used as a volume pedal (but not in the traditional sense either, since you’re not cutting volume completely). With the treadle parked toe down Q also works very well as a boost. Overall, the EQ transitions are smooth and the engagement (clicking on the toe switch) is 99% quiet (you hear a change in signal output or tone while playing, but no loud clicking or popping). The demo included with this review demonstrates the various uses and sounds with both clean and dirty amp channels. Clean channels can sound very modest and smooth (depending on how clean it is), whereas there’s definitely aggressiveness with a dirty channel –similar to a wah, phaser, etc., in that the character of the pedal becomes more apparent between clean versus dirty. OVERALL IMPRESSION: Handmade in Greenwood Lake, NY, Q retails for $225 USD. Its price is fairly standard for a quality pedal, but what it offers is a completely unique perspective on modulation and tone through its dynamic EQ possibilities. Not only can you add dimension by altering the midrange of your tone on the fly, but each band (Treble, Mid and Bass) has a 20dB cut/boost, thus allowing volume swells when desired, but also boosting of the signal while being able to sculpt the tone. The huge headroom of Q is the result of the same internal voltage tripler found in the Edison Preamp (also by Night Owl Industries), which gives you a lot of boost without overloading the signal (at least if placed last in the signal chain). Since the sound from Q isn’t cutting or narrow like a wah, you get a more organic scooped sound when jacking the bass and treble, or you can cut the bass and treble for some great lo-fi tones. Q also is fantastic as a basic boost pedal for lead playing and for adding swells and character while working the midrange via the treadle. Unlike a wah pedal, you can keep Q turned on and it sounds natural, since it’s an EQ pedal and the three bands can be matched ideally to your desired tone. GENERAL USE: Q allows you to sculpt your tone in real time (although the pedal can be parked without EQ sweeping) while playing guitar, bass or keyboards. The demo outlines some possibilities, but I bet there are several more. With toe down and the Treble and Bass dialed back (or turned off completely) you can achieve a very authentic lo-fi sound. Again with toe down, you can adjust the Treble or Bass to sculpt your tone, but also act as a boost (since there is a 20dB cut or boost with either the Treble or Bass). The real fun begins when you manipulate the treadle, which either cuts or boosts the Midrange by 20dB. This is where you get some interesting tone variations that seem to mimic a volume pedal and/or a phaser and/or a wah – depending how you use it. Get enough Treble and Bass in the mix and hear some very intense growls (without that shrill typically heard in wahs). When working the treadle in the front half of the range the mid scooping is not as intense, and doing so makes for a very good subtle wah-type effect. And whether working in broad or narrow sweeps, I find Q to work exceptionally well as a tremolo or Univibe – but what makes Q special is that you can control how fast or slow you want the tremolo/vibe without having to bend down and adjust any knobs like you would with a typical tremolo… you control the rate or speed with your foot so that you can have slow mixed with fast, etc. Placement is important, as often a volume or wah is at the beginning of the chain; but with this being an EQ pedal with 3-times the headroom of typical 9V pedals, your signal can be overdriven too hard if placed at the front end. Rather, place Q at the end of the signal chain (unless you want to overdrive earlier effects), viz., after distortions, delays, reverbs, etc.