View other reviews for this product:
jcdc1967
Published on 02/05/08 at 05:49
I use it for six months. I also have the boss briefcase so I could then compare the two products in that period. Both have their advantages and inconvnients and they are both excellent products.
What I love about the Pedaltrain (and more are not compared the briefcase boss):
- Robust frame and the fact that we can pass all the cables underneath. In the end it's so clean trs
- The capacity I have a wah-wah, the equivalent of five single and two boss boss double ... (Ie the equivalent of three pedals and more simple than what can be put in the briefcase boss).
- The cover: trs trs convenient way to store the cables and other accessories (with the boss you need a bag or briefcase and more). I prfr the cover for the frame with 10 pedals PSE dj several pounds. With the flight I was afraid that PSE trs heavy. I was right and I do not regret that choice.
Its default (and which are the benefits of the briefcase boss)
- Even with the velcro the pedals moving (this may have m'nerver
- As a cover, sometimes the rglages buttons move the pedals (so it must be his rglages checker before playing)
- No power supply
The solution I bring to the problem is that the velcro. What I like bcp in the briefcase boss, what are the foam pads that are drawings for boss pedals (single and double), but that can also be plugged in to dcouper p pedals of other brands.
1). I was lucky to find a foam plate 5mm thick (do not) than I first dcoupe the size of the Pedaltrain in which I then r alis dcoupes of the locations and size of the pedals.
2). In this foam pad then I dcoup notches 1cm-square height of the passage of power cables and jacks for each pedals.
3). I removed all pads that are under the pedals so that the surface is very flat (keep them for future resale possibe ca change ... often find a guitarist
4). I chose to work with double sided tape plutt the velcro
When all this silent prt, I put strips of double-tape all along the 4 "strips" of the Pedaltrain. First I placed the foam plate, then the pedals in their locations and I ended with the cables ... The tour silent jou ... ca is not likely to move
Let's be clear with the double-tape ca does not move but you have to be on his shot because the advantage of all velcro is that you can change the config of the pedals. In my case I set my pedals and I have not changed for two years so ... But if I change, I must dcoupe a new plate, etc ... The manipulation takes an hour.
For food, I have the pedals boss TU2 tuner that can power other pedals (8).
In the end I will not 8 the solution of the foam and I prfrais the briefcase boss (despite the lower capacity. Amlioration With that I bring and I put 9 I would do the same choice without hsiter. I am also slowly tempted by the MODEL pro ... Unless the boss does a suitcase so that puts more pedals.
What I love about the Pedaltrain (and more are not compared the briefcase boss):
- Robust frame and the fact that we can pass all the cables underneath. In the end it's so clean trs
- The capacity I have a wah-wah, the equivalent of five single and two boss boss double ... (Ie the equivalent of three pedals and more simple than what can be put in the briefcase boss).
- The cover: trs trs convenient way to store the cables and other accessories (with the boss you need a bag or briefcase and more). I prfr the cover for the frame with 10 pedals PSE dj several pounds. With the flight I was afraid that PSE trs heavy. I was right and I do not regret that choice.
Its default (and which are the benefits of the briefcase boss)
- Even with the velcro the pedals moving (this may have m'nerver
- As a cover, sometimes the rglages buttons move the pedals (so it must be his rglages checker before playing)
- No power supply
The solution I bring to the problem is that the velcro. What I like bcp in the briefcase boss, what are the foam pads that are drawings for boss pedals (single and double), but that can also be plugged in to dcouper p pedals of other brands.
1). I was lucky to find a foam plate 5mm thick (do not) than I first dcoupe the size of the Pedaltrain in which I then r alis dcoupes of the locations and size of the pedals.
2). In this foam pad then I dcoup notches 1cm-square height of the passage of power cables and jacks for each pedals.
3). I removed all pads that are under the pedals so that the surface is very flat (keep them for future resale possibe ca change ... often find a guitarist
4). I chose to work with double sided tape plutt the velcro
When all this silent prt, I put strips of double-tape all along the 4 "strips" of the Pedaltrain. First I placed the foam plate, then the pedals in their locations and I ended with the cables ... The tour silent jou ... ca is not likely to move
Let's be clear with the double-tape ca does not move but you have to be on his shot because the advantage of all velcro is that you can change the config of the pedals. In my case I set my pedals and I have not changed for two years so ... But if I change, I must dcoupe a new plate, etc ... The manipulation takes an hour.
For food, I have the pedals boss TU2 tuner that can power other pedals (8).
In the end I will not 8 the solution of the foam and I prfrais the briefcase boss (despite the lower capacity. Amlioration With that I bring and I put 9 I would do the same choice without hsiter. I am also slowly tempted by the MODEL pro ... Unless the boss does a suitcase so that puts more pedals.