Not satisfied with those reviews?
Filter
4.0/5(2 reviews)
100 %
Write a user review
Users reviews
kierelPublished on 01/17/09 at 07:29 (This content has been automatically translated from French)Three years ago I used to show, and for the same balance point: a good report, but takes good potato lamp life too short, too fragile socket (ai replaced by video-sockets projectors, lamps are easier to find than the factory provided) and changing lamps a bit tedious: the design of the box all screwed (screws work with the heat! has stuck!) and the wiring house reduced to a minimum (you must follow suit oddly block lamps in the body in order to accder lamps.
Having said that with 2 or 3 mod (respecting standards!) we have for a very cheap projo covers well with a good record.00
algauPublished on 01/24/09 at 09:02 (This content has been automatically translated from French)I have total 6 CLAP 500 DIFFERENT bought dates, max 4 years.
Pros: the look, flaps, vertical rglage end thanks to the support of the lamps which oscillates relative to the body of projo, good light output for 500 W spotlight effect with very white, an angle 'clearly broader than the RAP, cheap.
Cons: Can be a bit cumbersome, expensive and fragile lamps the limited life (as they are in series, 120 V 250 W, when the grid as the other grid ) take the brand preferences, you can not put a gelatinized before because it melts quickly, lamp holders and poorly fitted the sockets I got too fragile, the wiring apparent.
I used 4 in white wash for a scene dimmer than 8 meters wide and I get an ex…Read moreI have total 6 CLAP 500 DIFFERENT bought dates, max 4 years.
Pros: the look, flaps, vertical rglage end thanks to the support of the lamps which oscillates relative to the body of projo, good light output for 500 W spotlight effect with very white, an angle 'clearly broader than the RAP, cheap.
Cons: Can be a bit cumbersome, expensive and fragile lamps the limited life (as they are in series, 120 V 250 W, when the grid as the other grid ) take the brand preferences, you can not put a gelatinized before because it melts quickly, lamp holders and poorly fitted the sockets I got too fragile, the wiring apparent.
I used 4 in white wash for a scene dimmer than 8 meters wide and I get an excellent results.
I recommend the plug on a dimmer of preheating with SAVE for the lamps.
Caution, however the brand, I have 4 home STARWAY, no worries, 2 home Bravy with whom I had a worry.
Explanation: These are projos compossed of 2 boxes, one for connection with electrical fuse, the other reoit lamps are in series because they are 110 volts. In connection STARWAY series is in the electrical box, so good. In Bravy binding series is done in the case of lamps with a connector like a plug valve bike. This connector is insulated plastic bottom with heat lamps and touches the carcass. If your branch on a differential, a jump, otherwise the electrocution. We must replace this by fitting a bone china.See less20