View other reviews for this product:
hhub17 « do the job, but beware of mounting »
Published on 08/18/14 at 07:09Bought there six months. Before, speakers were asked on the desktop, too close to the wall and too low.
No other models actually tried, just a glance at the feet sono truc'occase near my home, where there was nothing suitable. I looked internet anyway to get an idea.
The bonus: they do their job, pregnant take over without moving with plastic strips, and the sound is not one of my floor or office rather than the speakers.
The - I've had the same problems as other buyers, namely the slope of the plateau, even by screwing a month or two as we recommend in IK.a and blow my speakers are not strictly oriented such , but also the home ground is uneven therefore not entirely their fault, but I was hoping to make up for it with the pad adjustment or spikes that screw underneath. Not doing enough margin, otherwise it locks. Do not even put when pregnant too heavy on it, because the tubes and plates are sturdy, but they hold only by screws a little limits, especially given the type of plate mounting: screw in the middle alone connecting the tube. This is the thread the weak point in reality.
Briefly, SAMSON RESOLV A8 is a bit limited I think.
Value: Very Korrect! They are not expensive and well worth the price of the metal there was in it.
With experience, I would do this choice because, despite irregularities in manufacturing, they are well worth their price and my home studio is not a dance but a quiet place so not too much worry for stability. And I'm a little handyman and I synthetic resin to remake a thread if it is draining or lend a welding arc.
No other models actually tried, just a glance at the feet sono truc'occase near my home, where there was nothing suitable. I looked internet anyway to get an idea.
The bonus: they do their job, pregnant take over without moving with plastic strips, and the sound is not one of my floor or office rather than the speakers.
The - I've had the same problems as other buyers, namely the slope of the plateau, even by screwing a month or two as we recommend in IK.a and blow my speakers are not strictly oriented such , but also the home ground is uneven therefore not entirely their fault, but I was hoping to make up for it with the pad adjustment or spikes that screw underneath. Not doing enough margin, otherwise it locks. Do not even put when pregnant too heavy on it, because the tubes and plates are sturdy, but they hold only by screws a little limits, especially given the type of plate mounting: screw in the middle alone connecting the tube. This is the thread the weak point in reality.
Briefly, SAMSON RESOLV A8 is a bit limited I think.
Value: Very Korrect! They are not expensive and well worth the price of the metal there was in it.
With experience, I would do this choice because, despite irregularities in manufacturing, they are well worth their price and my home studio is not a dance but a quiet place so not too much worry for stability. And I'm a little handyman and I synthetic resin to remake a thread if it is draining or lend a welding arc.