All user reviews of 4/5 for the Ecler nuo3

As indicated in the news:

* Power dcoupage (90-260V) oversized.
* Pr-amp Intgr.
* 60mm Fader with VCA.
* Extra large rotary knobs.
* 3-band EQ with Cut.
* Switch off by bass.
* RCA input / output for external effects stro.
* Double VU nitre ultra prcis (PFL / Mix).
* LEDs prsence signal and clip through.
* Switches rtro-clear LEDs tilted by 20.
* Symtrique output XLR.

UTILIZATION

Trs easy to use, no need to read the instructions to understand the basic functions.

Orders have t r-organized from the smacpro30 and are really willing.
Aside from possibly be the rglages faders and x-fader situs forward, I do not have, but it's a personal decision.
The faders are nice and soft trs, however I find the curve a little bit special.
Precision: We can rgler the curve tracks 1 & 3!
This time it leaves the placement Ecler oblique and vertical prfre faders.
The large knobs are nice correction, nanmoins is lacking a bit of space, for example to turn a two corrections same way is not the top. They are notched on the 0, but we feel pain, it's nice, but I fear that a lack of precision hair.
Given the two-nitre are useful because trs trs prcis, finished tracks that balance in the mix than the other 10 dB!

SOUNDS

I find the best correections dcoupes as the smacpro30. Indeed, now the medium cup + in medium / high as + smac that drew in the medium / bass.
Nuo3 on, when you cut the bass is not heard in rsons mediums.

Sonoritsgnrales level we remain in the quality Ecler, no surprise, then.

OVERALL OPINION

I reu the mixer this week, so I do not have much down to really judge everything, but I can already say that it is a good table trs, which succde dignity the SMAC.

Hello,

I use a NUO 3 and 2 since the month of January before I was working with a brand that no longer produced (forget the name but very solid table and bone). Here are my thoughts:
MOST:
- It has a good sonoritbr /> - connections are varis Master 1 and 2
- All buttons are really useful and easy to use
- Lightweight and not too fragile

The Cons:
- The default manufacturing often rptitifs I acht NUO two and both have a problem making Surla 3 is the cue that has a hard time staying down the other is a button that is PForm.
- After some use of two NUO NUO I think the three have no more place, the NUO 2 couraging exactly the same feats as his big sister.
- Gums in caotchou stuck under the table I find a cheap bof and trs.

If a hand is no particular default is a good production, for I find they are against trs moisture sensitive because I live in Guyana.

I use them with accessories for PIONEER in Mobile Disco.

UTILIZATION

Very well

SOUNDS

Is better than PIONEER

OVERALL OPINION

I remain satisfied throughout trs

Dj prciser I want from a critic, that there is a notch in the middle of the potentiomtres qualiseur!

<p class="bbcode-cite"> Quote: <span>- Is the rack?
- How many lanes, bus attendant, of dparts, returns ...)?
- What is the type of connectors (RCA, Jack, XLR ...)?
- The qualiseur paramtrique is it?
- The effects section is it intgre? ...</span>
View CHARACTERISTICS .

UTILIZATION

<p class="bbcode-cite"> Quote: <span>- The configuration gnrale is it simple?</span>
Compltement logic. For the balance against a t-section dport master, it might be a new mode .

<p class="bbcode-cite"> Quote: <span>- The usual functions are they easily accessible?</span>
There is room between all the features except the switch is that Cut bass strait and a little short and the use rsistant .

The saw-nitre is effective, although I saw a prfr-meters between each .

However, the knobs of qualiseur are a little too big to be really practical, there is sometimes a little difficult to learn, when our hands are not worthy of a Viking descendant .

<p class="bbcode-cite"> Quote: <span>- The manual is clear and sufficient? ...</span>
Not even look

SOUNDS

<p class="bbcode-cite"> Quote: <span>- The console is transparent?</span>
Yes, the sound is clean. But I met a default on the table: When I put a sound track 1 (assign the crossfader ct A) (all faders bottom), the channel 2 is in place mix (master) when I placed the crossfader (regardless of its rglages except that we must CUT In the rgl compltement ct B, there is always a little bit of sound passes through the left speaker (Same if you lower the fader track 1), and you do not rvez not, it&#39;s a default, you must then either lower the fader for channel 2 or assign the crossfader .

With regard to the sound quality the pure state, I have certainly not the stuff to judge his prowess vritables, nanmoins (and ears in addition to) anything in particular on its

<p class="bbcode-cite"> Quote: <span>- Introduced she breath?</span>
Not only Breath DTECT knob gnre master of breath going up the volume (but it will not be audible with music). For the breath you must place the gain, the knobs and the master of qualiseur bottom, and a breath, but can not reach that level for normal .
<p class="bbcode-cite"> Quote: <span>- The qualiseur is it effective? ...</span>
Yes trs effective, good for Linari the frquences dcoupe are well chosen, impeccable .

OVERALL OPINION

<p class="bbcode-cite"> Quote: <span>- How long have you use it?</span>
More than half an hour.

<p class="bbcode-cite"> Quote: <span>- What is the particular feature you like best and least?</span>
I like it well Fader rgl not too breath and just enough to be able to start rsistant so they stick on their butts in the same top . For lack of it against Linari as the Mackie D.2.

The crossfader is a bit tad too hard to scratch the fury (and I&#39;m still hard in my criticism, but more than enough to scratch the conventional). The SETTING THE race is the srieux: CUT IN, Switch / Fade and Soft / Sharp, enough to have fun, but personally all this does nothing extraordinary. The CUT IN is too sensitive, the rgalge Switch / fade is not useful forcment .

For the pure sratch it has a good behavior, but the Mackie D.2 infrieur for Ractive .

The potentiomtres are of good quality and reliable apparently, they are not anti-gum sheets but keep well in the fingers (smaller than those of qualiseur.

The switch is solid and a little hard, which is an advantage or a default as the case .

Small switches for FX or the slope of the crossfader (Switch / Fade) I got are too small to be handled quickly and intuitively.

The buttons seem PLF against them by the face of lesser quality whole table.

Another big default, it is too sensitive to the level of the sound source:-15dB gain, and no equalizer in the middle to the output level to max on the PC (which is the source), the sound comes from j 0dB on the VU nitre Exceeds see in the orange , Damage to this point.

<p class="bbcode-cite"> Quote: <span>- Have you tried many other models before acqurir?</span>
Ecler SMAC First, Numark SM2 pro, DJM-400, Vestax PMC-280 Pro and Mackie D.2.

<p class="bbcode-cite"> Quote: <span>- How do you report qualitprix?</span>
Trs good for 500 to have a nice 3-way like lbr />
<p class="bbcode-cite"> Quote: <span>- With the exprience, you do again this choice? ...</span>
It has no major default (despite his flight from the level of channel 2), it is stable, powerful, not too CHRE ... It is therefore a good choice for trs many people .