Log in
EN
FR

DJ Consoles

974 products found

Categories
Filter
Sort by
Evaluation
  • Reviewed or not
  • Editor’s award
  • Reviewed by Audiofanzine
Availability
  • Available or not
  • Sold new or used
  • Sold new
  • Sold used
Must-have products
  • All products
  • Flagship products
  • Best rated products
  • Hot products
  • Popular products
Price
  • Freeware
  • Low-cost (< $350)
  • Mid-range ($350 - $1,000)
  • Premium (> $1,000)
€
Clear
Sort by
  • Popularity
  • User ratings
  • Price - low to high
  • Price - high to low
  • Used price, increasing
  • Used price, decreasing
  • Name (from A to Z)
  • Name (from Z to A)
  • Added on
Choose a category
Selected category: DJ Consoles
Sort results
  • Popularity
  • User ratings
  • Price - low to high
  • Price - high to low
  • Used price, increasing
  • Used price, decreasing
  • Name (from A to Z)
  • Name (from Z to A)
  • Added on

The best DJ Consoles reviews

The reviews Audiofanzine members found the most helpful.
  • « A MUST-HAVE! »

    Rack-mountable in a 19" flight case. CHANNELS INPUTS CONNECTOR TYPE IMPEDANCE Ohm SENSIBILITY dBU DJ1/DJ2 Balanced Mic XLR 600 -60 to –20 Line Unbalanced Mono TS Jack 22000 -30 to +10 STEREO1 Balanced Mic XLR 600 -50 to –10 Line Unbalanced Stereo RCA 22000 -20 to +20 STEREO2/3 Unbalanced Phono RCA 2x47000 -50 to -10 CD Unbalanced RCA 2x22000 20 to +20 STEREO4/5 Unbalanced Line1 RCA 2x22000 20 to +20 Line2 Unbalanced RCA 2x22000 20 to +20 OUTPUTS CONNECTOR TYPE IMPEDANCE Ohm SENSIBILITY dBU STEREO 1 Unbalanced XLR 2X600 -10 to +12 STEREO 2 Unbalanced XLR 2X600 -10 to +12 MONO Unbalanced TS Jack 600 -10 to +10 HEADPHONE Unbalanced TRS Jack 2x600 /8 0 to +20 RECORD –DJ Unbalanced RCA 2x1000 -10 RECORD –DJ Unbalanced RCA 2x1000 -10 Stereo EQ: Hi +/- 14 dB to 15 kHz Mid +/- 8 dB to 1 kHz Lo +/- 10 dB to 30 Hz Disco Sound 0 dB to + 12dB at 63Hz Mono EQ: Hi +/- 14 dB to 15 kHz Mid +/- 8 dB to 1 kHz Lo +/- 10 dB to 40 Hz USE Very easy to get familiar with, it's instinctive and clear. The knobs are far apart enough from each other to make settings comfortably. The long-throw faders allow you to mix very gently...With the help of the split balance of the headphones pre-listening, which means you have the current track on the left ear and the one you're syncing on the right one. It's a real treat! SOUND I use it with a marantz amp and it produces no noise. Very precise controls. The clarity in terms of frequency is such that you'll rediscover your songs. But it can also create some buzz with its disco sound! For techno mixes, the blend is subtle and deep, it's simply spellbinding. OVERALL OPINION I've been using it for two weeks and I can't stop asking myself how on earth did I not buy one before! The mixing comfort of the Dj Club seduced me several years back. Together with some technics sl 1210 mk2 decks (with ortofon concorde night club cartridges), it was the best setup I ever used (in a Paris nightclub). I had always wanted to go back to an analog mixer with long-throw faders, and I finally did. Freevox combines sturdiness, mix comfort and sound quality.. It's a MUST-HAVE!

  • « Simply Perfection »

    As a DJ, I was looking for a modular mixer that gave me a lot more flexibility than those currently on the market. I was doing some complex shows in the 80s where I needed 2/3 mics and at least 2 X RIAA and 3 x Line I/Ps with I/P gains and remote starts, 2 x Aux Send/Rtn on the Mic channels that I could use for off-air talkback to two stations and a basic comp/limiter. Harrison had that and more. The BPM counter was the first one I had come across and while it did not work too well in auto mode, it was fine manually. 32 years later I still use this mixer on the road as I find it has a far superior audio quality, with more headroom than many modern mixers around today and it has never failed me once. Many of Mike Harrison's designs were simply brilliant. It works well with both my Nexo and QSC PA Systems I tested Formula Sound PM80 and several so-called pro disco mixers of the day and found that none of them came anywhere close to the SP2000. The Formula Sound which I thought would be a strong contender was absolutely awful and more expensive. It had cheap 60mm linear faders that were not smooth at all, unlike the 100mm Alps conductive plastic ones in the Harrison. Pros Superb audio quality Low noise, even for op-amps Well made, good quality components High quality faders, even the 60mm cross-fader. Good range of modules Lots of functions Reasonably priced Easy to use and configure for my needs Cons M3 BPM Module - Auto mode is a bit flaky but in manual mode it works well. An accurate BPM display is a very complex thing to achieve. Even using modern electronics and computer processing it is still only really possible with manual intervention. No +48v phantom power on the M6 module 7-pin Din power connector on the end of a flying lead from the PSU. OK if you are going to keep it flight-cased with a sensible connector on the front panel.

  • « An awesome sound and manufacturing quality for a new approach to mixing »

    I chose the MP2014 as I was after a high quality mixer able to become my setup’s primary mixer, the one I use to mix most often and on which I can plug my computer music system as well as other, more classic mixers. I wanted a main mixer which would illustrate my favourite styles, that is house and electronic music. This mixer is indeed not a standard mixer; it takes you back to the 80s with its 100% knob-based layout. The knobs btw are exceptionally precise and allow for a smooth mixing process. The filters with a resonance setting are a real pleasure. I had never imagined how important the filter’s resonance is before trying this mixer. It incites you to have a sound come in through the filter starting with a low resonance setting, then setting it slowly upper and upper while lowering the filtering. A real professional, cooled-down way to mix which is most often used in electronic music/house/disco, but can also be applied to other styles such as hip-hop. The Isolator is also important, and its quality is excellent. Using its two secondary knobs, you can set the frequency range which will be impacted by the three main knobs. I personally use the Isolator to change the warmth of my sound during the same evening, but others use it like an effect, doing gating with the on/off switch – I personally don’t like it too much, or maybe I’m doing it wrong? It’s a 2-track mixer but it features a third session/aux track which EQ is limited to a single bass/treble knob, though it also features a filter. Quite practical as an input for another mixer of backup deck. It also features two USB ports for switchovers from one DJ to another, and its sound interface also works with iOS on an iPhone/iPod/iPad with no hub necessary - it is indeed a class compliant device, allowing it to work on a Mac without installing a driver. A loop allows to insert effects on the voice is also there, and the mixer features master, booth and record outputs as well as a mic in with ducking. The finish is awesome, even better than any high-end mixer by Pioneer or A&H and the wood sides highlight the paradox of “modernity VS back to the 80s” (you can also take them off if you prefer). I long hesitated with the 2015, but in the end the 2014 perfectly suits me. I usually use the two main tracks to mix and the section track for a drum machine or sampler. Plus, this model is way easier to transport and is only 11 inches wide – wooden sides included. The US production of the MP2014 and 2015 stopped in mid-2016 and only took back in Asia in mid-2017 – whether the quality is the same remains to be seen. Hence, US models are now somehow collector items. As for the digital part, the “session” track offers an SPDIF in/out, though unlike the MP2015 the main tracks’ in/outs remain analog, even when you switch to USB mode – in that case a (high-quality, by the way) AD/DA conversion is operated. The resulting sound is just unique, this mixer is the most neutral-sounding that I’ve ever heard, so much that when I used my other mixer afterward I first thought it had a sound problem – actually no, it was all about the difference between a real, professional mixer and a semi-pro model. The default sound is flat, somehow like studio monitors/headphones, and you can customize it using the integrated Isolator. It also works in DVS mode, with Traktor and Rekordbox for instance, but not (or not yet?) with Serato, though considering my music style (house and so on), Traktor is way more useful – unless of course Serato would change and broaden its functionalities as Serato leans toward scratch and traditional mixing. On a side note, the MP2015 is Serato-certified through the Club Kit, so it’s likely the MP2014 will end up being too. In the end, if you’re into house, electronic music, disco, nu-disco and you can afford it, go for the MP2014, it’s well enough to have fun. If you’re not into these styles, then it’s likely you’ll miss the crossfader but maybe it would help redefine your mixing style? Whatever scenario you adopt, it’s a purchase you won’t regret and the resale value is very good – especially for the US-made units, you might sell it for more than its purchase value.

  • « One of the Best Stanton Mixers »

    It's fair to say that Stanton have made some pretty bad mixers, but luckily this isn't one of them! Despite some innovations like the focus fader, most of Stanton's early mixers had the THD spec of a portable radio and were really not fit for purpose. The SA series was essentially Stanton's first attempt at addressing this, and the sound quality on offer here is actually very good. The EQs are a little soulless if I'm being critical, but this is unlikely to be of too much concern for its intended user & I'm used to better gear. The build quality is still very much Stanton - there's nothing to complain about, but it's quite agricultural. It has a solid metal case and the pots & switches are all great, but the overall feel is still of a modern day small-scale electronic item from China. Competing products from Allen & Heath, Rane and Ecler from this era are far more refined but this will be more than acceptable next to the better budget kit. Faders are acceptable for scratching but obviously you could do much better - think clacky old school Vestax. You could of course put a modern fader in if you wanted. I think this would be worth picking up in 2021 if you can find a good one. These days the scratch boom is long past and the best mixers are also sadly out of production, so the benchmark is lower in general. This is available for very little money now, and I can recommend it on sound quality alone.

  • « overall opinion of the technics sh mz1200 »

    having not been impressed with cheap mixers in the past choosing and using a quality mixer is paramount. after using a technics sh-ex 1200 mixer for years being greedy i decided to buy a pioneer djm600 as this was club standard a the time and i was drawn in by the efx gimmic. due to not being impressed with the overall build or sound quality of the djm600 which is basicly a djm500 with a sampler i got rid and bought a second hand technics sh-mz1200 expecting the build and sound quality to be similar to that of the sh-ex 1200 and i wasnt wrong. this mixer is bomb proof!! the crossfader and masters can take a good smashing and eq`s are exellent providing gain as far round as the eq knobs will go. from reading the reviews of others on here regarding this mixer i question weather they have used one at all. the adjustable curve of the crossfader has 3 settings which are all precise "note other reviewers have missed this" and all the masters and crossfader can be reversed. the send/return for using an external efx unit are perfect. i used this mixer with a pioneer efx 1000, 2x pioneer cdj 1000 mk3`s and 2x technics 1210 mk2`s. basicly this mixer is idiot proof!!! the vu meter tells you the exact left and right output of the unit and the cue level is just as exact determined by your master/cue and how you use the trims. if you have any idea how to use a mixer then you shouldnt be having to look at fairy lights anyway. you can also use front and rear amplifiers and split the 2 so you have the front area playing 1 tune and the rear playing another not really needed but nice. if you want a mixer which has sound and build quality that you can literally kick the shit out of then no messing this is the one to have..

  • « Before its time, but now behind times. EQs!! »

    Standard size 12 inch ixer, Heavy as hell! feels good though, not cheap and plastic, but still wouldn't call it a complete tank, road worthy though. All standard connections. 1/4 headphones on face and front side, a touch I like as the cord gets in my way (dont forget youre 1/4 inch adaptor!). 1/4 master outs would be nice, not needed though. biggest complaint here would be NO rca record out pre master! cant use the booth out to record its to unbalanced. XLR master balanced and spdif digital out as well. Fully Digital mixer at 24bit 48khz seems a touch low for a pro mixer, but sound has been far above what you would think. Maybe its watered down for spdif out. Fader curves are adjustable through the settings, so no worry that you will be locked into a nasty software feeling fader curve. Also a 3 mode EQ for the headphones. with 2 spdif in 4 phonos/aux, 4 lines, fx send/return, and 1 xlr mic, i have always owned a 1/4 inch mic, dont use mic much bout if i did id like 1/4. 4 channels, with a feature to copy the 1 and 2 pre faders to 3 and 4. like an input matrix before it was invented! love this. The fx send has no wet dry just a punch in... this can cause popping. usable, but a complaint. Ideally i would want a wet dry on each channel. Dont like the channel to send knob either. Fully parametric EQ with independently adjustable Q value!!!!!! prize feature on this mixer. The reason its in my collection to stay! needs to be on new mixers! like a good mastering desk eq for the djay that likes master blends! 2 bulilt in fx units but they each can only be assinged to alternating channels, meaning you cant run 2 fx on one channel. Inless you run fx unit A on channle 1 or 3 and then fx unit B on master option... then i guess you would have 2 fx on one. 2 loop/1 shot samplers. have not found use for this in the mix, used it for one shots before, but with vinyl i could see this to be good! Color scheme, feel, architecture, and layout make this mixer stand out! Alot of times a company tries to build a top of the line product and misses out on simple over sights or makes it with too much character so that its a love hate thing. though this mixer is not a just show up and play on it for the first time, once you tune it to your styles and lean it, its good as any. well done tascam, a classic in my eyes. for sure worth owning, but is it ageless?? im not sure. UTILIZATION fx are not the best... and the way you use them is not the norm... punch in is fun, but with encoders and no dedicated knobs, fx values and wet dry are hard to control. fun, but not a real mixing tool, more just some frosting to throw on top of a mix. I had high hopes for the low pas filter, but no can do its a pulsing oscillator type thing. This is not a just plug in and show out for your first time mixer. You will NEED the manual!!!! Functions are not easy to access. With no manual you will never be able to set the features to your mixing style. You will be able to mix, but only using maybe half the features, and with the default settings, and since there is so much that can be changed to fit your style, you need to read that manual. You have to cue the master channel to hear the master in the headphones. This through me off at first.. why would you even not select this? it would effectively turn the mstr/cue knob into a backwards volume control. Having the samplers input on there own channels with no meter and a volume knob can make it hard to drop a sample at the right volume. SOUNDS No his.. have seen a slight buzz before but probably some place else in the cords not the mixer. Mixer seams clean and true. sounds slightly cold.. probably not preferred for playing old soul vinyl or something. The fx are a step above toys, but not a strong point on this mixer. They can sort of be used as real tools, but the control is not as intuitive as one would like. In combination with the input copy feature you can create a wet dry control and cue preview the fx. The pitch fx is the coolest and good on looped vocals! also the delay and echo can be good, but maybe pull some bass and work the volume down as it builds. The sampler seems to loose a small amount of bass push. But I love the highs!!! to me the highs sound better then any pioneer mixer, even the newest djm900! some of my favorite highs come from the rane ttm57, and these highs are a good runner up, with a little less space between the mids and the highs, but in no way would i say the highs sit on top of the mids. sound wise i would say this is the digital version of Xone sound! Not a xone sounding digital mixer, but the quality of sound frome a xone with out the analog warmth and a crisp almost refreshing at time digital crisp on the highs! Lastly the EQ's for me are the crown jewel of this mixer! I dont know why this style has not become the norm or more commonly found on all mixers! I have seen some high end mixers like the stanton vrm that has a paramic control on the mids. also i have seen high end digital mixers that the parameters of the mids can be changed in the settings. but these eq's truly offer the most control I have ever seen on a dj mixer! True the knobs are small and pointy and a bit hard to work needing 2 hands. they dont feel good in your hands like some mixers. The curve on the pull down of the EQ's is very aggressive! not as bad as some cheap digital mixers. ( the built in mixer on the numark ns7 so aggressive it makes the eq's almost un-usable.) to describe the curve, when you see so called pro djays always just slightly turning the eq's and you cant hear much of a difference. Almost looks like they just are touching or making sure the eq knob is centered. well on these EQ's that all would have a nice small effect on the music. but a slightly more normal turn on the eq will pull it out too fast and with out a track under to fill will make the mix sound a bit dry. There is a delay on the EQ, drives me crazy but it dosnt get in the way too much. if you slam to -40dbs or full cut its instant. any other adjustment there is a half second or so delay! almost like it moves in slow motion. so lets say you have you bass turned to -12dbs and then you want to slam it back in!, so you spin it fast up to strait, what you get is a smooth longer slightly delayed reaction. as if you did it smoothly. So it can gloss over a dj that eq's overly aggressively and makes everything he dose sound done smoothly. but with the sharp curve on the db pull down added to a delay, can cause some problems. but still the control makes it easy to look past this. so if you twist from 0 to full kill no delay, distant kill. but if you go kill bring the bass in twist back to 0, delay and smoothing/slowing of motion!!!! ok... well ill do my bass drops with the eq kill toggles on either side of the crossfader. NOPE! these are a fun feature.. but i dont think many people buy a mixer based on EQ kill toggles next to the crossfader. well these are junk! for the music I play the low cuts out the lows and most all of the mids, were the highs cuts out most all of the mids and highs and the mid kill, will damn near cut out the whole song. Awful useless parameters that cannot be adjusted on these kill switches. Let me dive in deep here and paint a few pictures. Another mixer like the x9 that had a revolutionary idea, that should have, but didnt catch on is the Urei by soundcraft 1603 series mixer. if you look up this mixer the eq is at 0dbs when turned to 2 o'clock, +8 db at 5 o'clock, and then full cut at 7 o'clock. so between 2 o'clock and 5 o'clock there is 8 dbs of positive, and between 2 o'clock and 7 o'clock going backwords you have from 0 to -100 or kill. helps balance the curve. most mixers like the x9 have 0 to kill from 12 to 7 or 5 "hours" between 0 and -100 then 5 " hours between 0 and + 8!! so there has to be curves so fit the physical range of motion. the X9 can go +9 and then goes to like -40 then kill or off. what im saying is i need less motion range on the up side and alot more motion range on the negative side, or a better designed curve on the down side of the EQ. So as if i didnt write enough about EQ's let me finish up with saying, pick any 3 mixers to go up against the X9, some mixers have better feeling knobs, some have nice long curves on the eq, some mixers like the Xone may even have 4 parameters with the mid high and mid low. But no matter what the mixer and how good the eq's lets play songs of all ages and styles through them and play the eq's some are going to cut the lows all the way into the mids, most get sloppy when on some style of music when it comes to the point were the highs meet the mids. lots of vocals will be mastered in the mid high area, and there will be overlap. so in my mind from ontop of the vocals up i want my high know, vocals down to the top of the kick i want my mids, and kick down to bass line i want my low knob. every song every style of music, these points are different! adjust the parameters and tune it in every song. you can even use it to do sweeps giving you a control like a filter with a pull down like a eq. making it still different and better in most situations then a filter sweep with a wet/dry. There are songs when you got a good kick, but the bass line just isnt coming through strong enough, damn... turn up the lows, too much kick.. but with the X9 go down and grab that bass line and pull it up were you want it!!! The X9 has the best EQ CONTROL found on any dj mixer. not he best eq's, but the most control of the EQ's! OVERALL OPINION If you are a DJ and you know you always bullshit knob touching on the eq... doing super slight to no adjustments to make it look like you are doing so much work up there, stop bullshitin and get this mixer! enough EQ control to keep you busy! If your a producer that is into hardware and not laptops, and your use to working with big mixing mastering desks, if you are starting to dj and/or do live hardware shows this would be an ideal dj mixer to sit along side a pair os cd players, an electribe and a tr909 drum machine! Perfect for me a dj thats starting to like pre-laptop prediction hardware. Mixer is timeless for its build and features, like the sp-404, not like the sp-303 witch is timeless for its sound color. This mixer is well made and far from a cool toy for in your home. this bad boy is ready to go on tour! I paid 300 for a used x9 off ebay. I wanted it because its unique and I wanted to use it at my weekly gig that didn't have a house mixer. I will still opt to use the house mixer a pioneer 800 or what ever, if another dj brings our his 900 or rane or what ever ill plug in and play. this isnt the kind of mixer that you just show up and play on, but its fun when you know it! I also have found some use for it in production as well. Well made and the plentiful options gives you a creative way around most all limitations. it may be old, but it will keep up with the top guns of today still! so in conclusion, I dont think anyone can complain about the sound, I personally love it! top notch sound to me. Not the best mixer in the world, but a unique mixer with character and special ability's. It will make you different, not better! Its timeless for the right collector. Its not timeless for the sound like a bazooka or a urei. but timeless as it was the electric car made by GM in the 90s before there was Tesla. I the next new Pioneer mixer the djm 1100 has full parametric EQ's then no one will remember this mixer, but someplace there will be a die hard fan like me saying " I told you so!"

  • « This has it all »

    The Behringer DX2000USB mixer has 7 channels and it has very good audio outputs. This mixer is great for just about anything. It does not just have to be used for a DJ or club. It is also great to use for events and other similar activities. It has a built in USB interface, and 5 stereo inputs. This unit does have phantom power in case the user may need it. It also comes with some software like audacity which is already free anyways so it really does not make a difference. It also comes with podcasting software, but that is free too. UTILIZATION Setting this mixer up is simple, but it can be a little overwhelming at first because it is a rather large mixer with a lot of inputs and outputs and functions to control. You will need to read through the manual in order to fully understand it unless you have worked with a unit this size before. SOUNDS The build of this mixer is very good, it is solid and heavy. It is not meant to be portable but it is mean to sit in a rack. It will take up three rack spaces which is ok for units of this size with this many features. The DX2000USb has a 3 band EQ and gain knob per each channel. There is also talk over functions that let you control the sensitivity and damping. OVERALL OPINION I love everything about this mixer and it will be around for a long time. It works with any computer and does not need to set up any type of drivers or anything because it works right through the USB mode like any other device would. We left it racked in one of the clubs we use to be in a lot and then we could each just plug our computers up to it as we came and that away it could be used by anyone without compatibility issues arising.

  • « Xone 92 was the best in this range »

    The Allen & Heath Xone : 92 is a DJ mixer that cost almost 1500 USD but it is worth every single dollar. I knew from previous Allen & Heath units that this was going to be a great buy. After I purchased it (in 2008) I was very happy with my money that I spent on it. It was very simple to start using right away and the build of it is very solid. It was honestly one of the best built units I have ever worked with under 2 thousand dollars. UTILIZATION There are 6 stereo channels, 2 aux sends, 2 LFO’s and 2 independent outputs (stereo mix). This was the mixer that I basically took with me everywhere and it was my main mixer for a long time. I had zero issues with it. There was actually another version of this that was out before this one came out, I am not sure why they discontinued that one. But I know for a fact there are no issues with this version of the Xone : 92. SOUNDS I used this mixer for well over a year and did probably between 20 and 30 major venues and clubs with it. The audio outputs on it are amazing and the sound quality was perfect for the systems of bigger clubs. The headphone output was very quiet and clean. I was able to get my next tracks ready to be mixed in easy even in loud clubs with a lot of noise going on around me. OVERALL OPINION I loved this mixer and its full MIDI capabilities. There is nothing you cannot do with this mixer and it sounds amazing. This would be my first choice in this price range if I was to go back and buy another mixer under 2 grand right now. I am very happy with my decision to go with the Allen & Heath Xone : 92!

  • « Just the right price! »

    The M2 from Numark has a solid steel construction and has an even better price tag than a lot of other mixers. It has two channels and is the type of mixer that is perfect for the stage! I was using this mixer for about 5 months for some smaller gigs in small clubs just because I didn’t want to take out my main set up to these smaller gigs. The cross fader is great and made to take some serious punishment. There is also a 3 band EQ on this mixer that does a great job for on the spot EQ’ing and getting out those unwanted frequencies. This mixer is very easy to work with and I have not experienced a single bad thing with the M2. UTILIZATION If you are a “scratching” DJ than this is the mixer to have if you are on a budget. It is heavy duty and will allow you to have total control over your mixing. There are switchable line inputs that I used for my turntables, mp3 player, and CD player. So no matter what your main source of audio is going to be you will be able to run it right through this mixer to get the sound out to your crowd, and EQ quickly and on the spot. SOUNDS This mixer can be racked and there is no phantom power on this mixer (something to keep in mind if you plan on working with it and microphones). There are RCA master outputs and a ¼ stereo headphone outputs. OVERALL OPINION All of the input and outputs slots are solid and will not start to cause any shorting after a lot of uses. No matter where I took this unit, I had the ease of mind knowing that I would not have any issues with it. That is one of the reason that I chose to use it as my smaller set up mixer for a while. It has never let me down.

  • FP User's review

    Same amount of features as most other mixers in it's price range plus effects which I feel is all it's good for. UTILIZATION Exteamely easy to use. Almost self explainatory. Manual is good too. I would not trust this thing in a club enviornment. No way! The plastics and build reminded me of something you would find in RadioShack. I'm suprised they don't break during shipping to their retail locations. Very chinsey. SOUNDS Crunchy sounding when being used at high levels. The highs really get fuzzy. The E.Q. is okay but the knobs feel very cheap. OVERALL OPINION Being that Iv'e used it several times as my friend owns one, I can honestly say that every time I use it, it leaves me frustrated. I don't think mixers should have effects built in. A MIXER IS A MIXER AND AN EFFECTS PROCESSOR IS AN EFFECTS PROCESSOR. Don't combine them cuz one or the other will suffer. In this case the mixer end falls off. Originally posted on FutureProducers.com Posted by: Unknown ( 6-, 2003)

  • « Wow »

    The Rane TTM 56 is a performance mixer for Djs. And boy is it awesome. This is hands down the best mixer I have owned, and my absolute favorite. It features No Contact faders and level controls. The faders use magnets, making them impervious to any kind of smoke or moisture damage the way optical faders are. There used to be a video floating around of one of these faders in a cup of soda, and still functional. Seriously great equipment. Solidly built in every single way. The eq cuts PERFECTLY. If you want the bass cut, there is NO bass. UTILIZATION Using this mixer is like heaven. The faders feel so good, perfect resistance, yet buttery smooth. Beautifully done knobs, really tactile and strong. This thing is built like a tank. Things are spaced well so your fingers have plenty of room to work. Whether you are a turntablist, or a DJ, this thing is the freaking BOMB. So much fun to use. I was creating new sounds in just minutes. All the functions are easily accessed, and it's simple as any mixer to set up. Power, cables, mix. If you can set up a desktop computer you can set up this. SOUNDS The mixer is stealthy quiet, and the no touch faders ensure it will stay that way. No bleed or swipe sounds. Silent as space until you drop the mix. The EQ is out of this world, perfectly tuned and so responsive. I haven't heard a better eq on a mixer yet. OVERALL OPINION Overall, this is hands down my favorite mixer. Worth every single penny. I would buy this a million times. Every single aspect of this is perfect, though my favorite thing hands down is the magnetic faders. I have actually had issues with optical faders getting ruined by smoke during a performance, and these are a godsend. Everything about this unit feels, and sounds amazing.

  • « Very good mixer! »

    Yes, it can be rack-mounted, with the mod. RCA, 1/4" jack and XLR connectors 4 channels, very practical The EQ is all right. It was more than enough back then and even today. Nice but limited effects section (although it's more than enough). USE Very easy to use SOUND Transparent sound. To get a quality and clear sound, you must ALSO consider replacing the power and filter capacitors. Use quality capacitors and you'll be surprised!!! The same applies to the faders. Clean them to avoid having noises and crackling. All electronics age with time and the capacitors age pretty badly. Personally, after some modifications, my djm 500 produces no noise, no crackles and it sounds perfect (I also have the djm 600, djm 400, ecler nuo 5, power france pmp 403, freevox dj club, and american audio q2422...) There are mixers that age better than others (depending on how much you use them and how you store them). OVERALL OPINION I've used it frequently for quite some time. I have lots of other models (freevox, pioneer, power france, ecler, soundcraft...)