All user reviews for the Ecler MAC 40 V

It's been over a year that I possde I mix with almost every day.

So to start, this table is no problem rack (that's 19 ").

Regarding connectivity, there are two master outputs: output XLR and RCA output (I recommend the XLR audio quality is even better).
We can connect 2 turntables, 2 cd turntables and a microphone.
To connect 3 turntables I recommend mac70.

The buttons in this table are neither too large nor too small, they are just good, it niquel!

The sound quality, well it's the cler! Really perfect! A good dynamic in the sound. When a button turns the diffrence really means! Provided, however, to have good speakers!
If I compare it to other tables that I test (Pioneer DJM500 and 600 for example), the sound quality is much better in ecler!

However, I regret that on this table is that there is no effect unlike pioneer tables (which have only a ELSEWHERE well on their tables).
That's why I plan to buy a Pioneer EFX to overcome that.

As for the faders, they are long enough (without too much be), thereby gradually Take affected sounds in order to own mixes.

In addition, this table is sturdy trs!
APRS almost a year and a half of use, I had no problem.

What about other .... The view is quite prcis meter! On the Difference of mac70, we do not see the meter to master and headphone simultanment (you must press a button), but it is not good teacher, there are again for the meter.

In conclusion:

EXTRAS:
- The quality of sound really gnial
- The robustness of the table
- The ergonomics of the table (fader, buttons, view meter)

Cons:
- No effect Intgr
- The cross fader the wrong place for the followers of scratch

In a résumé trs trs good food that I recommend especially because of its sound quality!!

A 9 / 10 this table because there is no effect.

UTILIZATION

The manual is clear! And then a mixer is not very complicated to understand!

SOUNDS

No breath of his ecler quality is perfect!

OVERALL OPINION

This table is of the same relatively expensive: 550.
But the quality is paid for!
Personally, this is not a purchase that I regret!

Here is a small notice on the table. I possess two years, that mean? it is superb.

His most are without any doubt the sound quality. Please note that it embeds the components have to see anything one way or another with those of his younger sister, the Nuo SERIES. Xcellent is a table for those who do not judge by the esthtisme. It remains faithful to the reputable brand. It is solid, ultra reliable over time and an exceptional quality. His eq is daunting both in its precision that its cuts

Its less: it is still a large minimum. Personally I see that I find it so powerful.

I would put 9 / 10 because the precision n'xiste currently not

UTILIZATION

Comment above

SOUNDS

Comment above

OVERALL OPINION

Comment above

Rakable
MASTER output 2 in RCA and XLR Master 1
4 tracks
Crossfader

UTILIZATION

Utilisaton simple, but if you utilisier a DJM before it takes a little longer

SOUNDS

The sound is impeccable, no breath, Equalizer works very well. Cut possilbe

OVERALL OPINION

I've had it for over a year.
I tested the Pioneer (DJM 500, 300, 600, 400), Du Rodec (BX-9, MX 180MKII)
It is a very very good restaurant, very professional design. The sound is of impeccable quality. But ...
Lack of fishing. The equalizer 10 maximum, not top. Better than Pioneer's perspective, less than Rodec. RCA to 1 Volt (ie unloaded) so I advise XLR output.

Barely two phono inputs. So if you use more than 2 plates, direct you to another table.

I do not like the curve of the crossfader. The sound of the second track is too fast at the most, almost forced to play with the fader for a more gradual.
A remake, I went to a rather Rodec. The sound is of impeccable quality but for me lack of sins and heat. But between a Pioneer and an Ecler, I choose the Ecler without hesitation.