All user reviews for the img Stage Line MPX-206

So what if it is a very good restaurant! it is rack-mount ...
It is a 4-way table with 8 inputs (2 Phono, 2 CD and 4 line) and 2-way micro one with talk-over etc ...
Given LED on each channel (quite prcis)
beat indicator (LED)
cross-over asignable each channel knob
possibility to go out on a box with a adjustable FFECT send function return on each channel 3-way qualiser prcis trs.
a master in symtrique (XLR) and asymtrique (cinch) cursor linraire
2 master only asymtrique linear slider
Master 3 in asymtrique and rotary (exit boost)

UTILIZATION

It is very easy to use a table and take control of one small "defect" is that we have no indicator when selecting a source but otherwise impeccable cursors coulise easily and are good quality.
as the manual I have to say I've never read it it goes very easily

SOUNDS

The qualiser trs is efficient and easy to use because it is trs prcis
she blows a lightweight once the pots are mounted to the maximum but still acceptable
and an output signal which enables strong enough to pull big amps
small black dot, low volume means when selecting the source of the crossover

OVERALL OPINION

In my service for the past four years she did a lot adjacent to evening and is always on top! j'aprcie that most of this table is seen by the channel that shows you the level at which prcisment you find you and put in relation to the master saw it know whether to live " play "with the gain.
TRS is a good value for money as a quality table that level that price it's not empty!
for beginners I would take exactly the same because we know everything to do with this table!
If I do not use it more simply because I had the opportunity to buy a trs Rodec a good price.
I counsel all

Trs a good table ...
I used it for 4 years and no worries, just replace a pot, a sound incredible ...
Table 4 is an 8-channel switchable, channel micro and micro dj spar boost output, and a master master 2 (with VU) and output rec ... function send / return so possibility of including a box effect.
A gadjet ... Diode "bpm" on the crossfader is assignable to each channel by a selector.
Rglage bass, and treble mdium per channel.
Active filter cutoff bass / medium / high on each channel Crossfader.

UTILIZATION

This is a table that is good enough are. Very easy to use and everything is relatively well accessible.
Regarding the mode of employment, it comes in many languages, including franais.

SOUNDS

The qualiser is ffective but ... with a correction lgrement larger would be even better.
A breath trslger trs output master once put the pots thoroughly ...

But everything is reasonable compared trs tables beginners or mid-game
equivalents ..

OVERALL OPINION

I used it for 4 years due to a night every two weeks ...
Before I was a DJ Amrican, Stageline mpx3 and I must say that 3 is the best by far
Trs interesting price quality ratio!
If I sold mine it was for a acqurir Rodec mx180mkIII ...
If I had to return to a 2 table or a table of apoint I would go for the l!
I advice to beginners, simple good quality and above all it's just a big lol

19-inch rack-mount (standard)

Connections:
- Input RCA (cinch)
- DJ Mic Jack or XLR (the two are possible in front, behind only Jack)
- Output A or A and B XLR RCA (cinch)

What I like most is the dual system OUTPUT A and B. Can be connected directly on 2 amps, and independently manage the volume!

UTILIZATION

Super simple to use and intuitive.

I appreciate that the knobs are not broken buttons for adjusting the equalizer as we see too often now.
The equalizer is above each lane.

SOUNDS

Equalizer very precise, this is not the case for many consoles!
For breath, it is harmless.

OVERALL OPINION

I use it for over a year.
No worries!

And value for money is excellent.
I have two, for two systems "his" I !
And I would do the same hassle-free shopping!

Too rare occasion (the good stuff, it will not sell: D !!!), if you find one, go for it!

Rackable 19 "/ 4voies (2 * CD / Phono, 1CD/line, 1line/line) + 2mic / 3 outputs whose main master symétrisue / no effects ...
Exactly what I was looking like configuration:
Making the mobile disco, I was looking for a table having both:
A by-ledmèrte (DM practice as we move into the last tube electro, for example, a CD of the 80 who is 10, implying large differences in sound level meter allows the LED to adjust the gain before to send the sound, again, for people like me who are more oriented animation mix, it is an aid to show stall, especially when someone comes to us talk for a mix, even if the ear is disrupted, tjs was the beat visually.)
The micro-channels with linear potentiometer (2 enough for me, one for me, for any speech or singing during the evening, for the linear Knob, people generally know how to use a microphone and are unaware of the danger for HP ... in case they fuck in front of my cuts, I quickly made a linear decline with rotary ...
-A powerful and well ... I had a bad experience by connecting the DX 7.0 in B. ...... r instead of my old table, I found the sound horrible, with only the midrange and too powerful, my old amp clipping it even with the table at 80% (amp bottom), whereas with my old table or the latter, my RMX1450 (pots at the bottom) begins to clip when I get between -3 and 0dB on the table
-2 To 3 outputs for distributing ... a main symmetrical connection, a booth for returns, so I can rest my ears from time to time and output in case there is a second room or sound to speaker multicast installed around the room that I operate with maximum care for both ears but also for people not to slam because they are not mine)
-4 Separate tracks for my 4 CD players and can connect a PC for possible broadcast a slide show or video (classic at weddings, birthday's ...)

Finally, to summarize, if I had configuration to do, it would have been there ... not exactly the effects that take up space and not used for what I do, good sound, the microphone in a linear decline rapidly if feedback, visual feedback about the noise level of the source and its tempo, multiple outputs for managing multiple broadcast areas ...

UTILIZATION

No need for manual configuration as simple ...
Everything is easy to access, as the connections that the management of knobs on top ... the rubber buttons are very nice, with my old table, it was hard plastic, I was often sore fingers at the end Evening ...

SOUNDS

The sound is good, not too many breath and especially has a fairly significant which does not have to put everything back to when the registration was low, the equalizer is not too bad ...

OVERALL OPINION

Here is where things get complicated!!
At first I was left on a table or pro Ecler Rodec either ... unfortunately, my readers have begun to lose confidence (still work, but sometimes little bugs like that will not open drawer) ... n ' not having the budget for good readers (I wanted to spend on flat plates, I took DNS1000 Specials at this time) and a table top range, so I tried a table with the same kind of config and that rodec ecler and requirements that I set myself above around € 500 / 600 ... unfortunately I found nothing at that price, the only tables in these ranges with effects, not in 19 "or micro rotary potentiometers with ... then I found this table which was perfectly suited to the configuration I was looking for was a under my budget, but I told myself that it should be fine ... I n 'have not been disappointed on the points I was looking for ... BUT ... and this is why I will advise against this table for anyone who knows anything about electronics ....
It lacks a lot of CONFIDENCE!
Let me explain ... in 1 year, I track "MIC" who started to fool around, back to the Service, Repair, more problems on it, but in full evening, Channel 4 s is strong enough to pass up, even with the slider to 0. Channel 3 recently kidding: almost no sound from one side ... a great blow in the rack and it works again normally ... in the end I think it's assembly and the internal connection on which economies had to be made, I disassemble shortly to check everything out and redo all that is proper connections, see if the AO hold well on the bases ... unfortunately, even if these problems are electronically benign, if it loose in full evening is the shit for the DJ because the table is an element that has not in several copies and without which the evening can be assured ... I'll see what happens after checking ... but I think that an effort on the assembly should be done even if the price increase because the setup is great for the mobile disco ... in hindsight, I should take a scorer's table to not have the problems I see now ...

EDIT: I opened this afternoon so I complete ... Like I said above, the cards are of good quality (vertical through a circuit, a PCB behind every Knob which allows an easy change of the faders and set of several circuits for preamp, power supply & management crossfader, which occupy the part after the voie4 )...... but there are quite a connector pins from around the circuit and lots of cables to connect PCB them ... that's what fucks shit ... I tightened everything and it works again nikel ... finally, even if less manageable for the change, it would have been preferable to any weld or post a more reliable internal connection ... it's a shame because otherwise, this table has great qualities ...