[NAMM] Peavey Ecoustic Session 300

The Ecoustic Session 300 is a bi-amplified, 300-watt, three-channel acoustic amplifier with digital effects, looper and a high-frequency ribbon driver with independent level control.

Channels 1 and 2 both provide a wealth of features, including individual 9-band graphic EQ, Gain, Master Volume, Phase Reverse, Piezo Pre-Shape EQ, Tuner/Mute, and a Notch Filter with Peavey’s FLS Feedback Locating System that allows users to identify and eliminate problem frequencies.

Features
•    300 watts of peak power
•    Bi-amplified system with 2 × 8” full-range speakers and one high-frequency ribbon driver with independent level control
•    Three independent channels
•    Three operation modes: Duet, Link and Switch
•    Separate nine-band graphic EQs on each channels 1 and 2
•    Combo XLR and 1/4” inputs on channels 1 and 2 (9V/48V phantom power)
•    Gain control with clip light on channels 1 and 2
•    Master volume on channels 1 and 2
•    Piezo pre-shape EQ switch on channels 1 and 2
•    Channel 1–2 master blend control
•    Notch Filter with FLS® on each channels 1 and 2 for controlling feedback
•    XLR and ¼” TRS direct outputs on channels 1 and 2
•    Separate effects loops on channels 1 and 2
•    RCA auxiliary input on channel 3
•    Power amp in, preamp out for stereo operation with another amp
•    Master line out
•    Master volume
•    Stand mountable
•    On-board looper with foot controller
•    Advanced WYSIWYG (What You See Is What You Get) DSP technology
•    Reverb, chorus and delay with independent effect parameter adjustment
•    Footswitchable phase inverter for controlling feedback
•    Footswitchable tuner/mute out
•    Footswitchable tap tempo, looper, preset mode and channel
•    Up to 8 effect presets with optional foot controller