View other reviews for this product:
Gotreck61 « Good idea »
Published on 01/10/12 at 10:074 circuits (apparently separate):
An XLR jack and one 6.35-priority jack. A link to a 6.35 jack pad input 0dB/-20dB/-40dB
Output: an XLR, a 20 dB switch, phase reverse, a switch has 8kHz low-pass (6dB/octave), and finally a ground lift
A peak-meter per circuit.
This box is rack mountable in 19 "1U, symmetrical and allows you to avoid signal interference, and lower the impedance so that it is legible to a mixer (600 Ohms)
UTILIZATION
Easy to use, simple and complete. One comment to make: Why have they put out the front? I think there are geniuses who have forgotten to think. m'enfin, well, we start a small patch in the rack and the thing is forgotten. The manual just to recall what a DI and we recall the rules of good wiring.
SOUND QUALITY
Purely transparent, except of course if a-40dB pad, then yes, it snores. The high-cut is rather incidental, at least I've never used. if anything was wrong a good job
OVERALL OPINION
The idea is great, simple and cheap. Must be said that I had more than me typing pool of 3 or 4 see 5 DI at the foot of pianist, at least it solves the problem. And even with a bit of stinginess, I had better spend a guitarist in the box if it is not too expensive on scene (because it must be remembered that a DI with 10m of cable asymmetric upstream is not a nothing at all). It will never replace the individual DI but it's going to fly in a few anyway. Especially at this price! Price / quality ratio to rival competitors
Behringer thank you
An XLR jack and one 6.35-priority jack. A link to a 6.35 jack pad input 0dB/-20dB/-40dB
Output: an XLR, a 20 dB switch, phase reverse, a switch has 8kHz low-pass (6dB/octave), and finally a ground lift
A peak-meter per circuit.
This box is rack mountable in 19 "1U, symmetrical and allows you to avoid signal interference, and lower the impedance so that it is legible to a mixer (600 Ohms)
UTILIZATION
Easy to use, simple and complete. One comment to make: Why have they put out the front? I think there are geniuses who have forgotten to think. m'enfin, well, we start a small patch in the rack and the thing is forgotten. The manual just to recall what a DI and we recall the rules of good wiring.
SOUND QUALITY
Purely transparent, except of course if a-40dB pad, then yes, it snores. The high-cut is rather incidental, at least I've never used. if anything was wrong a good job
OVERALL OPINION
The idea is great, simple and cheap. Must be said that I had more than me typing pool of 3 or 4 see 5 DI at the foot of pianist, at least it solves the problem. And even with a bit of stinginess, I had better spend a guitarist in the box if it is not too expensive on scene (because it must be remembered that a DI with 10m of cable asymmetric upstream is not a nothing at all). It will never replace the individual DI but it's going to fly in a few anyway. Especially at this price! Price / quality ratio to rival competitors
Behringer thank you