The BLU-100 offers a fixed configuration of 12 inputs and eight outputs, configurable signal processing, logic processing and a fault tolerant digital audio bus.
The configurable signal processing capability offered by the BLU-100 is roughly twice that of the Soundweb London BLU-80 and BLU-16 devices.
The analog inputs of the BLU-100 provide software configurable gain in 6dB steps up to +48dB per channel and software selectable Phantom Power per channel. Phantom Power, Signal Present and Clip information per channel is easily accessible, without the requirement for a PC, from clear front panel LED indication.
The BLU-100 features a low latency, fault tolerant digital audio bus of 48 channels which uses standard Category 5e cabling giving a distance of 100m between compatible devices. Fiber media converters can be used to increase the distance between devices to over 10km (6.2 miles) using single mode fiber.
The BLU-100 is configured, controlled and monitored from HiQnet London Architect and is compatible with other members of the Soundweb London family. Its 48 channel digital audio bus represents channels 1–48 of the larger 256 channel digital audio bus when integrated with the BLU-800, BLU-320, BLU-160, BLU-120 and BLU-BOB devices. Up to 60 digital audio bus compatible devices can share channels on a single bus.
As with other Soundweb London devices, 12 Control Inputs and six Logic Outputs allow the BLU-100 to be integrated with GPIO compatible devices.
Check out www.bssaudio.com.
The analog inputs of the BLU-100 provide software configurable gain in 6dB steps up to +48dB per channel and software selectable Phantom Power per channel. Phantom Power, Signal Present and Clip information per channel is easily accessible, without the requirement for a PC, from clear front panel LED indication.
The BLU-100 features a low latency, fault tolerant digital audio bus of 48 channels which uses standard Category 5e cabling giving a distance of 100m between compatible devices. Fiber media converters can be used to increase the distance between devices to over 10km (6.2 miles) using single mode fiber.
The BLU-100 is configured, controlled and monitored from HiQnet London Architect and is compatible with other members of the Soundweb London family. Its 48 channel digital audio bus represents channels 1–48 of the larger 256 channel digital audio bus when integrated with the BLU-800, BLU-320, BLU-160, BLU-120 and BLU-BOB devices. Up to 60 digital audio bus compatible devices can share channels on a single bus.
As with other Soundweb London devices, 12 Control Inputs and six Logic Outputs allow the BLU-100 to be integrated with GPIO compatible devices.
Check out www.bssaudio.com.
Be the first to post a comment about this news item
Viewers of this article also read...
-
[MUSIKMESSE] JBL M20
JBL adds the M20, a dual 10" stage monitor, to its VTX M Series.
-
[MUSIKMESSE] JBL EON One
JBL introduces EON One, a new portable, all-in-one PA system.
-
[MUSIKMESSE] Korg Stageman 80
Korg presents the Stageman 80, a sort of mix between a guitar amp, a portable PA system and a groovebox.