Crest Audio announces the Pro-Lite 3.0 and Pro-Lite 3.0 DSP power amplifiers, featuring class D design with a switch-mode power supply designed to reduce weight.
The Pro-Lite 3.0 and Pro-Lite 3.0 DSP feature 870 watts per channel at 4 ohms stereo (up to 3,150 watts bridged @4 ohms), weigh 13.3 lbs., and deliver performance in parallel, stereo and bridged modes.
The Crest Audio Pro-Lite 3.0 DSP features an onboard digital signal processor that hosts a suite of delays (0–120ms per channel), adjustable crossovers, adjustable limiters, parametric EQ, HF driver EQ, four user preset storage locations, and stereo/mono operation with lockable security settings. The front-panel LCD screen allows users to identify and assign presets, while the USB port allows users to load presets and enables external setup and adjustment.
The Pro-Lite DSP section also integrates Waves MaxxBass Bass Extension technology, which uses psycho-acoustics to create harmonics that give the perceived effect of boosting low frequencies in the mix. The level of MaxxBass effect can be adjusted from 0% to 100%.
Crest Audio Pro-Lite Series amplifiers feature two channels with channel-independent, fourth order 100 Hz crossovers housed in a steel chassis. The ACL (Automatic Clip Limiting) circuitry is designed to prevent the amplifier from sending potentially damaging clipped signals to the loudspeakers. Additional onboard protection circuitry includes DC, Temp, Signal and Active safeguards, all referenced on the front panel with LED indicators.
The previously announced Crest Audio Pro-Lite 2.0 and Pro Lite 2.0 DSP power amplifiers boast the same features at a weight of 11.6 lbs. with power ratings of 985W per channel at 2 ohms; 540W per channel at 4 ohms; 280W per channel at 8 ohms; and 1,970W bridged at 4 ohms.
The Crest Audio Pro-Lite 3.0 and Pro-Lite 3.0 DSP will be available in Q4 2011 from authorized Crest Audio dealers.
Pro-LITE 3.0
- 13.3 lbs.
- 1,575W per channel at 2 ohms @ <0.1%
- 870W per channel at 4 ohms @ <0.1%
- 450W per channel at 8 ohms @ <0.1%
- 3,150W bridged at 4 ohms @ 1%
- 1,770W bridged at 8 ohms @ 1%
- Parallel/Bridge/Stereo mode switch
- ACL Automatic Clip Limiting
- Revolutionary Pro-LITE class D topology
- Detented input controls
- Combi Neutrik XLR-¼” inputs
- Speakon output connectors
- XLR thru connector
- Two channel-independent fourth order crossovers
- Pricing: U.S. MSRP $599.00
Pro-LITE 3.0 DSP
- 13.3 lbs.
- 1,575W per channel at 2 ohms @ <0.1%
- 870W per channel at 4 ohms @ <0.1%
- 450W per channel at 8 ohms @ <0.1%
- 3,150W bridged at 4 ohms @ 1%
- 1,770W bridged at 8 ohms @ 1%
- Parallel/Bridge/Stereo mode switch
- Revolutionary Pro-LITE class D topology
- ACL Automatic Clip Limiting
- Lockable level controls
- High-pass filter
- Combi Neutrik XLR-¼” inputs
- XLR thru connector (switchable between DSP processed or dry signal)
- Speakon output connectors
- Two channel-independent, adjustable fourth order crossovers
- Waves MaxxBass Bass Harmonic Enhancer
- Pricing: U.S. MSRP $799.00
To find out more, visit www.crestaudio.com.
Previous news item
ReValver HPse Now Included with Shreddage
Next news item
[EDIT] Touring Gear Series Shipping
Be the first to post a comment about this news item
Viewers of this article also read...
-
[MUSIKMESSE] JBL M20
JBL adds the M20, a dual 10" stage monitor, to its VTX M Series.
-
[MUSIKMESSE] JBL EON One
JBL introduces EON One, a new portable, all-in-one PA system.
-
[MUSIKMESSE] Korg Stageman 80
Korg presents the Stageman 80, a sort of mix between a guitar amp, a portable PA system and a groovebox.