DIGAM 7000 classified ad
New ad alertImages
Reviews
4.1/5(7 reviews)
57 %
14 %
14 %
14 %
Write a user review
DJBenoîtproblem with Powersoft Digam
Published on 02/25/13 at 15:11 (This content has been automatically translated from French)I used it for a few months after buying opportunity with another Digam a little less powerful.
I used previously amps Yamaha, Dynacord Crest and still functioning perfectly.
After a return to service of Powersoft for a layout problem and fast protection peak on my two amps, repair return showed their inability to deal with the problem! No improvement! who had the same problem and got away?
So, we drag our old amps still effective but heavy!
THANK YOU in advance for your answers!
I used previously amps Yamaha, Dynacord Crest and still functioning perfectly.
After a return to service of Powersoft for a layout problem and fast protection peak on my two amps, repair return showed their inability to deal with the problem! No improvement! who had the same problem and got away?
So, we drag our old amps still effective but heavy!
THANK YOU in advance for your answers!
35
»
Victoria V.robust, reliable
Published on 08/23/12 at 14:46 (This content has been automatically translated from French)We have 2 DIGAM 7000 for almost 5 years, bought both used.
We also Crown: MA 1200, 2400, 5000, VZ, CHEVIN Q6, other Digam etc ...
We are happy vraiments of 7000, we have already run less than 2 ohm carefree.
We never had a technical problem with these amps.
What we like the most:
weight, strength, reliability, power / weight ratio, "fishing" sound, the ability to load the channels (less than 2 ohm), its resistance to heat.
Least: the sound can only be less "hot" than equivalent analog amplifier, and the length of the amp (not rackable in "standard" formats)
But I have very few negative points about these amps.
With the experience we'd definitely undoubtedly the same...…
We also Crown: MA 1200, 2400, 5000, VZ, CHEVIN Q6, other Digam etc ...
We are happy vraiments of 7000, we have already run less than 2 ohm carefree.
We never had a technical problem with these amps.
What we like the most:
weight, strength, reliability, power / weight ratio, "fishing" sound, the ability to load the channels (less than 2 ohm), its resistance to heat.
Least: the sound can only be less "hot" than equivalent analog amplifier, and the length of the amp (not rackable in "standard" formats)
But I have very few negative points about these amps.
With the experience we'd definitely undoubtedly the same...…
Read more
We have 2 DIGAM 7000 for almost 5 years, bought both used.
We also Crown: MA 1200, 2400, 5000, VZ, CHEVIN Q6, other Digam etc ...
We are happy vraiments of 7000, we have already run less than 2 ohm carefree.
We never had a technical problem with these amps.
What we like the most:
weight, strength, reliability, power / weight ratio, "fishing" sound, the ability to load the channels (less than 2 ohm), its resistance to heat.
Least: the sound can only be less "hot" than equivalent analog amplifier, and the length of the amp (not rackable in "standard" formats)
But I have very few negative points about these amps.
With the experience we'd definitely undoubtedly the same choice!
We also Crown: MA 1200, 2400, 5000, VZ, CHEVIN Q6, other Digam etc ...
We are happy vraiments of 7000, we have already run less than 2 ohm carefree.
We never had a technical problem with these amps.
What we like the most:
weight, strength, reliability, power / weight ratio, "fishing" sound, the ability to load the channels (less than 2 ohm), its resistance to heat.
Least: the sound can only be less "hot" than equivalent analog amplifier, and the length of the amp (not rackable in "standard" formats)
But I have very few negative points about these amps.
With the experience we'd definitely undoubtedly the same choice!
See less
40
»
macdriverzPublished on 03/08/06 at 05:42 (This content has been automatically translated from French)
I did not use a long time because I did not like at all the sound coming out of a sub use.
The amp does not follow at all in complex loads, it must glean the equalo to have a little something and there, the huge excess of power becomes a little help.
A bit like using a 1 "compression to 200 Hz ..
is super light, that it must be acknowledged. It is close to 1.3 kilograms per kilowatt amp. It is the only huge interest in this amp. A if the current widespread use.
Against by using top, or broadband, which does not drop too much, it's all good.
The amp does not follow at all in complex loads, it must glean the equalo to have a little something and there, the huge excess of power becomes a little help.
A bit like using a 1 "compression to 200 Hz ..
is super light, that it must be acknowledged. It is close to 1.3 kilograms per kilowatt amp. It is the only huge interest in this amp. A if the current widespread use.
Against by using top, or broadband, which does not drop too much, it's all good.
02
»
KorrigansPublished on 02/01/07 at 06:07 (This content has been automatically translated from French)
I use these amps for years! I'm very happy! it works as well in that sub Broadband! I use 2 boxes DIGAM 7000 to 16 cm in 38 pavilions and a toboggan DIGAM 7000 8 cases for 38 inch mid-bass! Very stable at 2 ohms, generally I use them in heavy use for 48 hours non-stop! Finally, I use 1 to 4 heads DIGAM d1502 nexo 1000 and if all works very hard! I would definitely advice, good luck!
00
»
Tech. sheet
- Manufacturer: Powersoft
- Model: DIGAM 7000
- Category: Dual-Channel Power Amps
- Added in our database on: 11/06/2003
We have no technical specifications for this product
but your help will be much welcomed
»
Other categories in Power Amplifiers
Other names: digam 7000, digam7000, digam 70 00, digam70 00