draculax
Published on 11/27/06 at 07:13
Use on desktop PC: Athlon64 X2 4200 +, 2GB Ram, ASUS A8N-e cm, firewire card based on NEC chipset.
Monitor connected directly to the card output monitor.
Powerplay Pro XL output hand.
Using the front panel inputs for microphone and scratches / Low.
I plan to rewire my Berhinger UB1002 rear input in order to make use of the mixer if the need arises.
I thought a simple click on the volume button to mute the outputs enabled main / monitor, but it is not the case, click on the button to select which output controller via the volume knob. (Either one or the other, or 2)
it works well.
UTILIZATION
Ras for installation, just install the drivers and plug the card is asked qd.
Possibility of Routing in the interesting mix TerraTec.
Manuel ok.
Bundled with a nice little Cubase LE, although useful for small machines.
(Used this weekend on a laptop p3 1Ghz/256Mo ram)
Carrying case, FireWire cable of very good quality, and adapter 6 / 4.
Using the AC adapter (included) is required in the case of using the adapter 6 / 4 (no power supply in the firewire cable in this case).
GETTING STARTED
Drivers ok, maj firmware without worries.
Latency set to 5.6m, no cracking, nickel.
OVERALL OPINION
I have since Friday, no prob for now.
The facade of preamp are very good, clear, short, nothing to say, the qualitée sound is excellent, better than the preamp in my UB1002, which in itself is not very difficult.
For the price, I can say is a gift from a friend, following a request. : D
I really appreciate being able to activate the phantom power on the facade gun separately.
Note the optical output of the machine in the ass, which I wired into my stereo amp LUXMAN A-007. Useful to use the card in a player foobar2000 type and distribute the hifi system.
Monitor connected directly to the card output monitor.
Powerplay Pro XL output hand.
Using the front panel inputs for microphone and scratches / Low.
I plan to rewire my Berhinger UB1002 rear input in order to make use of the mixer if the need arises.
I thought a simple click on the volume button to mute the outputs enabled main / monitor, but it is not the case, click on the button to select which output controller via the volume knob. (Either one or the other, or 2)
it works well.
UTILIZATION
Ras for installation, just install the drivers and plug the card is asked qd.
Possibility of Routing in the interesting mix TerraTec.
Manuel ok.
Bundled with a nice little Cubase LE, although useful for small machines.
(Used this weekend on a laptop p3 1Ghz/256Mo ram)
Carrying case, FireWire cable of very good quality, and adapter 6 / 4.
Using the AC adapter (included) is required in the case of using the adapter 6 / 4 (no power supply in the firewire cable in this case).
GETTING STARTED
Drivers ok, maj firmware without worries.
Latency set to 5.6m, no cracking, nickel.
OVERALL OPINION
I have since Friday, no prob for now.
The facade of preamp are very good, clear, short, nothing to say, the qualitée sound is excellent, better than the preamp in my UB1002, which in itself is not very difficult.
For the price, I can say is a gift from a friend, following a request. : D
I really appreciate being able to activate the phantom power on the facade gun separately.
Note the optical output of the machine in the ass, which I wired into my stereo amp LUXMAN A-007. Useful to use the card in a player foobar2000 type and distribute the hifi system.